城市环境的影响与作用

揭示了城市环境的基本性质的基本特征，研究了城市环境对人的心理影响和生理影响。指出城市环境建设不公要满足人的物质需要，还要满足人的精神需要。     

利用高酸值餐饮废油脂制备生物柴油

以高酸值餐饮废油脂为原料,在酯化反应后再经两步酯交换反应制备生物柴油。在酯化反应中添加吸水剂可降低油脂的酸值,经一次酯化反应即可将油脂的酸值降至2m g/g左右,满足酯交换反应的要求。考察了酯化反应中吸水剂的添加方式、种类及其用量对酯化反应的影响,以及酯交换催化剂的种类及用量对脂肪酸甲酯(FAME)收率和产物组成的影响。实验结果表明,以凹凸棒土为吸水剂(用量为餐饮废油脂中游离脂肪酸质量的3%),且在酯化反应30m in时加入,酯化效果较好;以质量比为1∶1的NaOH和KOH混合物为催化剂进行两步酯交换反应时,催化剂的最佳用量依次为1.00%和0.75%(质量分数,基于油脂的质量),FAME收率最高达到96.33%。     

A segmentation-based fine-grained peer sharing technique for delivering large media files in content distribution networks

Delivering large media files over the Internet is a challenging task because it has some unique features that are different from delivering conventional Web documents. In this paper, we propose a fine-grained peer sharing technique for dealing with the problem in the context of content distribution networks. The key difference of the technique from conventional peer-to-peer systems is that the unit of peer sharing is not a complete media file, but at a finer granularity. By doing so, we improve the flexibility of replica servers for handling client requests. We analyze the storage requirement at replica servers and design a scheduling algorithm to coordinate the delivery process from multiple replica servers to a client. Our simulations show that the fine-grained peer sharing approach can reduce the initial latency of clients and the rejection rate of the system significantly over a simple peer sharing method.     

大型电除尘器的设计、安装及操作要点

探讨了硫酸生产用大型电除尘器的要求、设计参数的选择及结构设计.指出要重视大型电除尘器的设计、制造和安装质量,并精心操作和维护,以实现长周期稳定运行.生产实践表明,只有在各个环节都做到精益求精,才能使国产大型电除尘器的质量和性能尽快达到当今世界先进水平.     

Formation of mushroom-like ZnO microcrystals through a solution calcination process

Mushroom-like ZnO microcrystals have been prepared via a solution calcination route, using Zn(NO₃)₂ as Zn source in the absence of any surfactants, templates or catalysts. This is the first example to prepare mushroom-like crystals as semiconductors, which are expected to show particular physical properties. The ZnO products were investigated by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy and photoluminescence (PL) spectrum measurements. A suitable concentration of Zn(NO₃)₂ solution was important for the growth of the mushroom-like products. The reported synthetic procedure is straightforward and inexpensive, and thus can be readily adopted to produce large quantities of mushroom-like ZnO microcrystals.     

Convolutional solutions of partial difference equations

A significant part of the theory of one-dimensional linear shift-invariant systems is based on the concept of weighting function (or impulse response): the output is the convolution of the weighting function with the input. This paper introduces the concept of linear translation-invariant systems and uses this notion in studying impulse response, z-transforms, and transfer functions for multidimensional systems.     

雷达仿真系统中电磁干扰环境的仿真设计和实施

雷达仿真系统是为检测雷达设备的抗干扰能力以及在各种电磁环境下的工作性能而设计的，包括有源干扰和无源干扰的模拟仿真。本文阐述了无源干扰即杂波的散射模型和仿真过程；从同步脉冲干扰的基本原理出发，阐明在雷达工作环境仿真系统中距离拖引、速度拖引、虚假目标等同步脉冲有源干扰的设计和实施过程；并针对工作在搜索和跟踪交替模式下的相控阵雷达提出自适应综合干扰方式；最后分析并总结了系统仿真时为真实、有效地模拟电磁干扰环境应注意的关键问题。     

多排数翅片管空冷器风阻特性的数值模拟

本文对多排数翅片管空冷器空气侧的风阻特性进行了数值模拟.利用商用软件Fluent进行数值计算,结合经验公式和已有的实验数据,分析了不同入口风速下,阻力的变化规律以及流动阻力和温度变化对模拟计算的影响.     

无磷洗涤剂的现状及存在问题

含磷洗涤剂中含的“磷”主要是STPP，作用很大但对环境的危害也很大，它是造成地表水体出现富营养化的重要原因之一，所以许多地方政府都在实行“禁磷”——禁止销售、使用含磷洗涤剂。现在我国使用的无磷洗涤剂中代磷助剂主要有3种，其中4A沸石用量最大，但它会对环境带来新的问题。主要介绍了含磷洗涤剂的危害及无磷洗涤剂的应用现状，指出了我国禁磷后将面临的问题。     

Vibration thresholds for fretting corrosion in electrical connectors

Single frequency vibration tests were used to induce fretting corrosion in tin alloy plated contacts. The samples used in this study were connectors consisting of 25 pairs of mated pin and socket contacts. Experimental results for a variety of vibration levels, frequencies, and wiring tie-off lengths are presented. The experiments consisted of running a series of vibration tests at each frequency where the excitation level was stepped through a range of g-levels. During each test run contact resistance was monitored as a performance characteristic. The results exhibit threshold behavior at each frequency for the onset of fretting degradation. Typically a plateau region was observed where similar g-levels produced similar fretting rates. It was also found that outside the plateau region the g-levels varied according to the dynamic behavior of the mechanical system. In addition, a transfer matrix model was used to analyze these results. An empirical fit of the data correlated well with the model when damping was used. This analysis revealed the importance of the bending moment induced at the contact interface as a result of excitation levels and tie-off configurations. Consequently, it is concluded that dynamic response of the mechanical system under various g-levels and tie off configurations can greatly impact the performance of a connector system subjected to vibration stresses.