A generalized equation for the prediction of melting temperatures of homopolymers and copolymers

A generalized equation was derived to calculate the melting temperatures of homopolymers and copolymers. The Gibbs‐Thomson equation for homopolymers and a modified application to copolymers were derived using the proposed equation. The melting temperature T_m⁰ in the Flory equation corresponds to the melting temperature T_m^C,∞ of copolymer crystals with stems of infinite length. Also, T_m^C,n*, the melting temperature for copolymer crystals with stems containing the maximum possible number of structural units, n*, should be used instead of T_m⁰ as the basis of supercooling in crystallization. The proposed equation shows good agreement with experimental data for α‐alkene‐ethylene homogeneous copolymers.     

中温换热器检查及修复方案

经分析认为中温换热器缺陷出现的主要原因是H2 S腐蚀。采取更换短管以及补焊上段下管板的措施进行修复 ,取得了满意的效果     

Bi3+对纳米MnO2水热合成的影响研究

在中性和酸性条件下，以MnO2作为锰源，通过水热合成了纳米MnO2，通过XRD和TEM对产物进行的观察表明，在酸性条件下，向溶液中添加一定量的Bi^3 ，产物的晶型由α型向γ型转化，产物形貌由针状、丝状向颗粒状转变。     

烷基烷氧基硅烷的合成方法及其在涂料中的应用

介绍了烷基烷氧基硅烷的合成方法(包括烷基的引入方法和烷氧基的形成方法)、近几年来在涂料中的应用及其结构与性能的关系。     

P／MCs新型复合材料制备、结构及阻尼性能

采用特殊的渗流法所制备的新型Ｐ／ＭＣｓ复合材料，由高分子聚合物与蜂窝状铝架组成，它具有优异的阻尼性能，并简述了结构对阻尼的影响     

Combustion synthesis of advanced materials: Part I. Reaction parameters

An explanation of combustion (self propagating high temperature) synthesis (SHS) is given together with a historical perspective of the examination of such exothermic reactions. The application of thermochemical functions has been used to predict theoretically the maximum adiabatic temperature, T_ad. This, combined with a knowledge of the ignition temperature, T_ig, and the actual combustion temperature, T_c, has been used to determine the heat loss from the SHS reaction and the amount of heat needed to raise the adjacent, cold, reactant layer to the ignition temperature in order to maintain the self sustaining nature of the propagating mode of the reaction. The pertinent reaction parameters that control self propagating high temperature (combustion) synthesis reactions have been examined. These include: reactant particle size and shape; powder mixing and compaction; green density; reaction stoichiometry; impurities; volatiles and diluents; reaction environment; mode and technique of ignition; heating rate; and the effect of these parameters on the generation of heat, exothermicity and control of the SHS reaction.     

粘土作为高放废物处置回填材料的可行性研究

本文以西北粘土为对象,对其压实行为、热传导、膨胀特性,以及吸附和渗透性能进行了初步研究,借以探讨西北粘土在高放废物处置中用作回填材料的可行性。试验表明,以西北粘土为基材,经过适当的热改性和吸附改性,在初始含水量约为9%,于70MPa 下成型,用作高放废物处置中的回填材料是可行的。     

Non-steady-state model for kinetics of free radical polymerization, 4. Direct thermal initiation

This paper deals with the non-steady-state kinetics of direct thermal initiated polymerization. The initiation is assumed to be a bimolecular reaction of the monomer. The relationship between the radical concentration and the monomer conversion is rigorously derived. In further treatment a few very close approximations are introduced based on the fact that the number of monomer molecules reacting in the initiation step is much less than that consumed in the propagation step for a process producing high polymer, and the value of the rate constant for propagation or chain transfer is much lower than that for chain termination. Expressions for various molecular parameters, such as molecular weight distribution, number-average and weight-average degrees of polymerization, and dispersity, are given. Several numerical examples are provided.     

作大范围运动的空间桁架结构动力分析

作高速大范围运动的弹性体，由于运动和变形的耦合将产生动力刚化现象，传统的动力学理论难以计及这种影响。本文在有限元方法中首次引入了单元耦合形函数（阵），以此将单元弹性位移表示为单元结点位移的二阶小量形式。利用几何非线性的应变－位移关系式，在小变形假设条件下确定了单元耦合形函数。在此基础上，根据Ｋａｎｅ方程，运用模态坐标压缩，并通过适当的线性化处理，得到了一致线性化的动力学方程。编制了计及动力刚化的空间桁架结构有限元分析程序。仿真算例的计算结果验证了理论和算法的正确性