熔融石英陶瓷的性能及其应用

介绍了石英陶瓷的性能特点、制备过程及应用领域     

浅谈创业教育

按照《面向21世纪教育振兴行动计划》提出的目标，我国高等教育到2010年入学率接近15％，这个目标有可能提前实现；若按每年新出生人口为2000万计算，高等学校在校生规模将达到1500万，每年毕业生将在500万以上。面对这样沉重的就业压力，转变大学生毕业就是到社会上寻求工作岗位的就业观念，树立和加强创业教育，引导毕业生走自己的路，就显得有十分重要的特殊意义了。     

露天开采下盘无台阶采矿法

新桥硫矿首次在国内推行露天开采下盘无台阶采矿新工艺,该工艺具有剥岩少、基建快、出矿早、采矿工程延深快等特点。由于该工艺具有独特的靠帮方式和端部过渡方式,需严格控制底盘因爆破而导致的岩体滑动。该工艺的实施已取得了显著的经济效益。     

纤维素科学与技术研究进展

本文综述纤维素科学与技术的研究进展。阐述了纤维素结构、纤维素的合成、纤维素液晶、功能纤维素、纤维素溶剂、纤维素裂解和纤维素的废物利用等的最新动态。     

流动床离子交换工艺在己二酸催化剂回收中的应用

介绍流动床离子交换装置回收催化剂的生产工艺，从交换装置的选择到运行，分析了流动床的优点、影响因素以及生产中应注意的问题和要求。     

指数曲线贮仓的设计剖析

贮仓是许多工业过程中的常用设备，起拱是贮仓使用时常出现的故障，如何解决起拱问题是贮仓设计的关键，除常采取增大仓壁倾角、设置破拱装置等方法外，设计成曲线贮仓也是行之有效的措施之一。分析了指数曲线贮仓的工作原理和特点，建立了仓壁指数曲线方程，阐述了设计步骤与注意事项，并举例说明。     

Vinyl‐containing silicone resin as the crosslinking agent of heat‐curable silicone rubber

Heat‐curable silicone rubber (HCSR) was prepared by using vinyl‐containing silicone resin (VSR) as the crosslinking agent instead of polyvinylsilicone oil (C gum). Mechanical properties and crosslink density of the vulcanizates were measured. The results indicate that VSR is a good crosslinking agent for HCSR. The tensile strength, tearing strength, elongation at break, and hardness of the vulcanizate can reach 10.2 MPa, 29.1 kN/m, 720%, and 58 SHA, respectively. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3123–3127, 2002; DOI 10.1002/app.10054     

Diterpene resin acids: Major active principles in tall oil against Variegated cutworm,Peridroma saucia (Lepidoptera: Noctuidae)

Tall oil, a by-product of the kraft process for pulping softwood, has been shown to have insecticidal properties. In the present study, the active principles in tall oil against the variegated cutworm,Peridroma saucia Hübner, were investigated. GC-MS analysis showed that abietic, dehydroabietic, and isopimaric acids were major resin acid components of crude tall oil and depitched tall oil. When crude tall oil samples of differing resin acid composition were incorporated into artificial diet at a concentration of 2.0% fresh weight, they suppressed larval growth by 45–60% compared to controls. This suppression was significantly (P0.05) correlated with the equivalent contents of abietic, dehydroabietic, isopimaric, and total resin acids. These results were also evident from a diet choice test, showing that the second-instar larvae obviously selected diets with low levels of resin acids when different diets were randomly arranged in a Petri dish. Bioassays with pure resin acids (abietic, dehydroabietic, and isopimaric acids) demonstrated that all individual chemicals have similar bioactivity against this insect. Comparison of the bioactivities of depitched tall oil and an equivalent mixture of pure resin acids in thePeridroma chronic growth bioassay indicated that pure resin acids and depitched tall oil share a common mode of action to this insect. This study confirms that resin acids are major active principles in tall oil against the variegated cutworm, but other chemicals likely also contribute to the bioactivity of tall oil.     

Catalytic and inhibitory effects of dissolved Cd2+ on C3H8 electro-oxidation

Studies have been made of the effect of Cd²⁺ on the oxidation rate of C₃H₈ in 80% H₃PO₄ at 130 C on platinized Pt electrodes.Dissolved Cd²⁺ discharges, probably as Cd⁰, and forms a stable sub-monolayer on a Pt electrode at potentials as high as 0·5 V versus RHE. Although this Cd⁰ layer is apparently substantially desorbed in favor of adsorbed hydrocarbon, C₃H₈ adsorption is inhibited in its presence. C₃H₈ oxidation is also inhibited. However, the C₃H₈ oxidation rate is observed to increase under some circumstances, and this appears to be because Cd isabsorbed into the Pt lattice. Co-plating of Cd and Pt leads to an electrode which, once the excess Cd has been removed, appears to be stable, and which catalyses C₃H₈ oxidation by about a factor of three at 0·25 V. Above 0·3 V, this absorbed Cd somewhat inhibits C₃H₈ oxidation.     

Synthesis and Morphology of TiO2 Nanotube Arrays by Anodic Oxidation Using Modified Glycerol-Based Electrolytes

Titanium dioxide (TiO₂) nanotube arrays were prepared by electrochemical anodization of titanium sheets in the glycerol 176 mL/H₂O 44 mL/NH₄F 0.5 wt% electrolytes modified with H₂SO₄ and NaAc addition. The surface morphologies, average inner diameter, and the length of the nanotube arrays changed with the solution pH in the range from 5.6 to 4.0 by adding H₂SO₄. A uniform surface morphology of the nanotubes with average inner diameter of ∼80 nm and a length of ∼1000 nm was obtained when the solution pH was 5.0. The growth rates of the nanotubes were remarkably enhanced by NaAc addition in the range of 0.04–0.14 M . With NaAc addition of 0.10 M , the length of the nanotube arrays reached 4.16 μm after an 8-h anodization, increasing 3.23 μm compared with no NaAc addition. The relationship between solution pH and growth of TiO₂ nanotubes was analyzed by current–time curves, solution electrical conductivities, and scanning electron microscopy (SEM), and the role of NaAc was also discussed based on SEM and solution electrical conductivities.