Simultaneous recovery of copper and surfactant by an electrolytic process from synthetic solution prepared to simulate a concentrate waste stream of a micellar-enhanced ultrafiltration process

Electroplating method was employed to recover copper and surfactant simultaneously from synthetic solutions prepared to simulate concentrated waste stream generated from micellar-enhanced ultrafiltration. Effects of surfactant and copper (II) concentrations, surfactant to copper (II) molar ratio (S/M), electroplating voltage and time, solution pH, and ionic strength on metal recovery and electrical current efficiency were investigated. Results show that at a fixed S/M ratio of 5, the first-order kinetic constant for Cu (II) removal by electroplating increases with decreasing SDS concentration. At fixed SDS concentration of 8.5 mM, increasing initial Cu (II) concentration increases both Cu (II) recovery and current efficiency. Electrolyte pH has profound effects on the metal recovery and current efficiency due to the difference in solution conductivity after pH adjustment and the extent of Cu (II) adsorption onto SDS at different pHs.     

Effect of preparation conditions on the properties of a coal-derived activated carbon honeycomb monolith

Activated carbon honeycomb (ACH) monoliths were prepared by extruding of a mixture of bituminous coal and organic additives and subsequent carbonization and steam activation. Preparation parameters that were varied were carbonization temperature and activation time. The carbonization conditions were 500, 650 and 800 °C for 1 h and the steam activation conditions were 850 °C for 2, 4 and 6 h. The monoliths at various states were characterized by SEM, XRD, nitrogen adsorption and compression test. It was found that carbonization temperature has significant effects on pore size distribution and mechanical strength of ACH monoliths. The ACH monoliths prepared from high carbonization temperatures exhibited lower values of the BET surface area and total pore volume and higher value of the mechanical strength than those of the ACH monoliths prepared from low carbonization temperatures. This was attributed to the effect of high temperature carbonization that results in the formation of relatively less defective structures.     

A helical drive in-pipe robot based on compound planetary gearing

The modern society is fuelled by very comprehensive grids of gas and liquid pipelines. In recent years, various in-pipe robots have been developed for inspection and maintenance tasks inside such pipes. In this paper, a novel in-pipe robot is proposed and developed for gas/oil well interventions at thousands of meters downhole. Due to the nature of such intervention, in-pipe robot design must be capable of carrying a very large payload, as large as 2500?N inside a pipe with diameter as small as 54?mm. The proposed design concept is based on a compound planetary gearing system. One of the major novelties of this design is the use of pipe wall as a ring gear for one stage of the compound planetary gear system; the other novelty is the generation of helical angle when the planetary gears are expanded to press on the pipe wall. The proposed concept is compact, efficient, and has never been reported before. In this paper, the helical angle, the velocity, and load capability of the proposed system will be analyzed. The load transportation capability of the proposed robot is also measured based on an experiment. Initial data have shown great potential in carrying large payloads.     

Collaborative representation with reduced residual for face recognition

Collaboration representation-based classification (CRC) was proposed as an alternative approach to the sparse representation method with similar efficiency. The CRC is essentially a competition scheme for the training samples to compete with each other in representing the test sample, and the training class with the minimum representation residual from the test sample wins the competition in the classification. However, the representation error is usually calculated based on the Euclidean distance between a test sample and the weighted sum of all the same-class samples. This paper exploits alternative methods of calculating the representation error in the CRC methods to reduce the representation residual in a more optimal way, so that the sample classes compete with each other in a closer range to represent the test sample. A large number of face recognition experiments on three face image databases show that the CRC methods with optimized presentation residual achieve better performance than the original CRC, and the maximum improvement in classification accuracy is up to 12 %.     

A new Chinese character recognition approach based on the fuzzy clustering analysis

In this paper, a new Chinese character recognition (CCR) approach is proposed based on the fuzzy clustering analysis theory. Chinese characters (CCs) have various similar radicals and stroke components, which make it difficult to recognize features in the CCR process. At the same time, the recognition accuracy and the efficiency are lower when the objects to be recognized are complex. In order to solve these problems, a fuzzy clustering analysis method is introduced to enhance the computing efficiency. At first, the CCs including learning samples and testing samples are transformed into binarization templates in the form of matrixes. Then, the minimum distance algorithm is applied to calculate ‘distances’ between the testing sample templates and the learning sample templates. At last, the character recognition can be achieved by searching the minimum distance from the results. The experiment results of the CCR process can prove the effectiveness and accuracy of the new method.     

关注非异氰酸酯聚氨酯(NIPU)涂料的应用和发展

介绍了NIPU涂料发展的现状,阐述其特点,主要原材料聚碳酸酯和多元胺的反应动力学,杂化HNIPU的概念及其应用前景。     

Formation Mechanisms of Platelet Sr3Ti2O7 Crystals Synthesized by the Molten Salt Synthesis Method

The molten salt synthesis (MSS) method is utilized to synthesize the anisotropic platelet Sr₃Ti₂O₇ (S3T2) single-crystal particles. The aim of this study is to identify the essence of platelet Sr₃Ti₂O₇ crystal growth and guide the synthesis of anisotropic platelet SrTiO₃ crystals as well as various technologically important materials. Based on the results of X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy, the formation mechanism of platelet Sr₃Ti₂O₇ crystals conforms to a nucleation–structure rearrangement–dissolution–diffusion in situ epitaxial growth mechanism model. First, SrCO₃ reacts with TiO₂ to form submicrometer SrTiO₃ nuclei. Then, most of the nuclei surrounded by salt ions aggregate and rearrange to form a large SrTiO₃ matrix. The structural rearrangement and the subsequent in situ epitaxial growth processes control the morphology, composition, and size of the final Sr₃Ti₂O₇ crystals. In the synthesis process, the conversion between SrTiO₃ and Sr₃Ti₂O₇ is as follows: and the crystallographic orientation relationship between Sr₃Ti₂O₇ and SrTiO₃ in the interface is (100)_S3T2//{100}_ST, (010)_S3T2//{010}_ST, and (001)_S3T2//{001}_ST.     

Electrocatalytic properties of NDGA and NDGA/FAD hybrid film modified electrodes for NADH/NAD redox reaction

The fabrication of monolayers composed of nordihydroguaiaretic acid (NDGA), and hybrid films composed of NDGA-flavin adenine dinucleotide (FAD) adsorbed films was performed in neutral aqueous solutions to produce electrochemically active thin films exhibiting one and two redox couples, respectively. An electrochemical quartz crystal microbalance and cyclic voltammetry were used to study the in situ growth of the NDGA and hybrid NDGA/FAD film monolayers. The NDGA modified film electrocatalytically oxidized NADH, ascorbic acid, dopamine, and N₂H₄ in neutral aqueous solutions. Well-separated voltammetric peaks were observed for dopamine and uric acid mixtures, and also for ascorbic acid and uric acid mixtures using the NDGA/GC modified electrode. When transferred to various aqueous buffered solutions, the two redox couples of the NDGA/FAD hybrid film and their formal potentials were observed to be pH-dependent. The electrocatalytic oxidation and reduction of NADH and NAD⁺ by a NDGA/FAD hybrid film in neutral aqueous solutions was carried out, and the electrocatalytic oxidation of NADH was performed using a NDGA/FAD hybrid film.     

发酵工厂中空气净化工艺的合理选择

从节能、降低成本、优化工艺的角度，对无菌空气制备过程中，空气预处理流程的选择、空气净化设备、过滤介质以及设备的遴选进行探讨，以实现工艺和工程设计的优化结合。