Gas gain in xenon + 2,3 dimethyl-2-butene filled proportional counters

The gas gain in xenon-filled proportional counters can be greatly increased by the addition of a small quantity of 2,3 dimethyl-2-butene (DMB). We have found that a broad peak in gas gain appears when the concentration of additive is between 0.4% and 0.75% and the molecular number density of the gas filling is about 2.7 × 10²⁵ m⁻³ ( 1 atm). When the gas density is reduced to about 1.4 × 10²⁵ m⁻³ ( 0.5 atm) the peak becomes much sharper and better defined and reaches its maximum when the concentration of additive is 0.43%. Lowering the density to approximately 7.0 × 10²⁴ m⁻³ ( 0.26 atm) results in a very sharp, well defined peak centred on an additive concentration of 0.23%. The gas gains used to define these peaks were of the order of 10⁵, whilst in pure xenon at identical anode potentials the gas gain was of the order of 10.     

Extraction of Lipids from Aqueous Protein‐Rich Streams using Near‐Critical Dimethylether

An extraction process for obtaining lipids from aqueous protein/lipid mixtures has been developed using near‐critical dimethylether (DME) as the solvent. The process has been demonstrated on fresh and reconstituted egg yolks, and on selected dairy by‐product streams. The lipid yield is dependent on the processing temperature, solids content and feed ratio of solvent to liquid. The extent of protein denaturation is also dependent on these parameters. The phase equilibria of DME‐water‐phospholipid mixtures are presented with modeling of the DME‐water system using the Peng‐Robinson equation of state.     

System Reliability of Slopes by RFEM

In a probabilistic slope stability analysis, the failure probability associated with the most critical slip surface (the one with the minimum reliability index) is known to be smaller than that for the system that comprises all potential slip surfaces. The first order reliability method (FORM) targets the minimum reliability index related to the critical slip surface, and thus cannot be used to predict the system reliability of slopes, except when all possible slip surfaces are perfectly correlated. It is shown in this paper that the random finite element method (RFEM), which uses elastoplastic finite elements combined with random field theory in a Monte-Carlo framework can accurately predict the system probability of failure (p_f) of slopes.     

Accuracy assessment of methods for determining hip movement in seated cycling

The goal of this research was to examine the accuracy of three methods used to indicate the hip joint center (HJC) in seated steady-state cycling. Two of the methods have been used in previous studies of cycling biomechanics and included tracking a marker placed over the superior aspect of the greater trochanter, a location that estimates the center of rotation of the hip joint, and assuming that the hip is fixed. The third method was new and utilized an anthropometric relationship to determine the hip joint location from a marker placed over the anterior-superior iliac spine. To perform a comparative analysis of errors inherent in the three methods, a standard method which located the true hip joint center was developed. The standard method involved establishing a pelvis-fixed coordinate system using a triad of video markers attached to an intracortical pin. Three-dimensional motion analysis quantified the true hip joint center position coordinates. To provide data for the comparative analysis, the intracortical pin was anchored to a single subject who pedaled at nine cadence-workrate combinations while data for all four methods were simultaneously recorded. At all cadence-workrate combinations the new method was more accurate than the trochanter method with movement errors lower by a factor of 2 in the vertical direction and a factor of 3 in the horizontal direction. Relative to the errors introduced by the fixed hip assumption, the new method was also generally more accurate by at least a factor of 2 in the horizontal direction and had comparable accuracy in the vertical direction. For computed kinetic quantities, the new method most accurately indicated hip joint force power but the fixed hip method most accurately indicated the work produced by the hip joint force over the crank cycle.     

The Nicolas Andry Award-1995. Fracture healing. Radiation induced alterations

This study investigated the effects of radiation on fractures in a rat femur model. Two different radiation dosage fractionation schemes (1100 rads given in one dose and 2500 rads given in 10 divided doses over 12 days) and three different times of initiation of radiation (1 day before fracture, 3 or 10 days after fracture) were studied. Fractures exposed to these levels of radiation all appeared to heal during the course of this experiment, although with varying degrees of delay, with the exception of those exposed to a single dose of 1100 rads 3 days after fracture. These animals remained at a more immature level of repair histologically compared with the control group, throughout the entire time evaluated. The strength of the final repair remained less than the control for all the groups receiving treatment. These results may offer some explanation for the clinical observations of an increased incidence of delayed union and nonunion of fractures, an increased incidence of fracture and refracture in irradiated bone, and an increased incidence of fracture and nonunion in constructs using radiation in conjunction with allogeneic bone. Furthermore, the observed effects were generally no different in the animals treated with the two clinically relevant dose fractionation schemes chosen for this study.     

Pregnancy loss and autoantibodies against phospholipid-binding proteins

We investigated the utility of two approaches for exploiting pleiotropy to search for genes influencing related traits. To do this we first assessed the genetic correlations among a set of five closely related quantitative traits (Q1, Q2, Q3, Q4, Q5). We then used the genetic correlations among these five traits both to remove the common genetic effects of the four remaining traits, thereby identifying the unique genetic contribution to each trait, and to extract a synthetic phenotype which exploits the shared genetic information (pleiotropy) among these five traits. After obtaining these conditional traits, we then searched for evidence of quantitative trait loci (QTLs) (using variance component linkage) influencing the unique residual genetic component for each trait as well as those influencing the expression of the synthetic traits. From this work, we conclude that the removal of the common genetic effects of other traits in a group may be of greater utility when the majority of the pleiotropy initially detected between traits is attributable to the shared additive effects of polygenes, rather than to those of major loci. By contrast, decomposition of the genetic covariance matrix to its principal components is a greater utility when the majority of pleiotropy is attributable to major loci.