Elaboration and Properties of Starch-Based Bio-Material Films Using Different Solvent Systems

Nowadays many studies have been focusing on the development of biomaterials obtained from renewable resources to replace fossil based plastics. The famous example is starch which is produced by a wide variety of plants as energy reserve and is available in abundance at a very competitive price. It can easily be transformed into thermoplastic starch （TPS） by addition of a plasticizer. However, TPS suffers from several limitations, such as poor mechanical properties and water sensitivity which did not permit its use in large practical applications. In this study, different formulations, containing commercial corn starch and plasticizers were prepared by the film casting method, after gelatinization of starch in hot aqueous suspensions. To obtain flexible films, two plasticizers were used： glycerol and dioctyl phthalate （DOP）. The fact that the DOP displayed an exceptionally poor water affinity, three co-solvents, methanol, ethanol and acetone were added in the aim to improve its solubility. The obtained materials were tested considering the water resistance measured at 25 and at 50 ℃, mechanical properties in tension and the differential scanning thermal analysis （DSC）. From the obtained results, it seems that the solvent system as well as the plasticizers used affects considerably the properties of the resulting materials.     

Sunflower seed cake as reinforcing filler in thermoplastic composites

Dimensional stability, mechanical properties, and melting and crystallization behavior of polypropylene composites filled with sunflower seed cake (SSC) were investigated. Injection molded composites were prepared from the SSC flour and polypropylene with and without maleic anhydride‐grafted polypropylene (MAPP) at 30, 40, 50, and 60 wt % contents of the SSC flour. Twenty‐eight days thickness swelling and water absorption values of the specimens increased by 43 and 56% as the filler content increased from 30 to 60 wt %, respectively. The flexural modulus of the polypropylene composites increased from 3157 to 4363 MPa as the SSC flour increased from 30 to 60 wt %. The maximum flexural strength 38.4 MPa was observed for 40 wt % SSC flour filled specimens. However, further increment in the SCC flour decreased the flexural strength to 31.4 MPa. The tensile strength of the specimens decreased from 22.5 to 14 MPa while the tensile modulus increased from 3023 to 3677 MPa as the SSC flour increased from 30 to 60 wt %. The dimensional stability and mechanical properties of the composites were significantly improved by the incorporation of the coupling agent (MAPP). The effect of the MAPP addition was more pronounced for the strength than for the modulus. The melting temperature and degree of crystallinity of the neat polypropylene decreased with increasing content of the SSC flour. The degree of crystallinity of filled composites considerably increased with the incorporation of the MAPP. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Physical,mechanical, and thermal properties of polypropylene composites filled with walnut shell flour

Injection molded specimens were prepared from the walnut shell flour and polypropylene with and without maleic anhydride-grafted polypropylene at 40, 50, and 60% (weight) contents of the walnut shell. The bending and tensile modulus of the composites significantly increased with increasing the filler content while the bending and tensile strengths significantly decreased. Water absorption and thickness swelling of the composites increased with increasing filler content. The MAPP improved the interfacial adhesion between walnut shell flour and polymer matrix. A 40/57/3 formulation of the walnut shell flour/polypropylene/MAPP can be used in outdoor applications requiring a high dimensional stability.     

Preparation and properties of nano diamond/6F‐bisphenol A‐based cyanate ester composites

The aim of this study was to improve thermal conductivity, thermal stability, and mechanical properties of bisphenol A dicyanate ester (BADCy) by adding bisphenol A dicyanate ester containing fluorine (F‐BADCy) and nano diamond. The cyanate esters containing fluorine/nano diamond composites having various ratios of BADCy, F‐BADCy, and nano diamond were prepared. Thermal stability and thermal conductivity of the samples were evaluated by thermogravimetric analysis, differential scanning calorimetry and laser flash method, respectively. The samples were characterized with the following analysis; gel content, water absorption capacity, and stress‐strain test. Hydrophobicity of the samples was determined by the contact angle measurements. Moreover, the surface morphology of the samples was investigated by a scanning electron microscopy (SEM). The obtained results prove that the cyanate ester containing fluorine/nano diamond composites have good thermal and mechanical properties and they can be used in many applications such as electronic devices, materials engineering, and other emergent. POLYM. COMPOS., 34:1977–1985, 2013. © 2013 Society of Plastics Engineers     

Single-Laboratory Validation for the Determination of Aflatoxin B1, B2, G1, and G2 in Foods Based on Immunoaffinity Column and Liquid Chromatography with Postcolumn Derivatization and Fluorescence Detection

This study presents a method validation procedure for the determination of aflatoxin B₁, B₂, G₁, and G₂ in hazelnut, hazelnut paste, walnut, peanut, pistachio, corn, and wheat. The method consisting of clean-up with immunoaffinity column, high performance liquid chromatography with postcolumn derivatization and fluorescence detection was validated in accordance with Commission Regulation 2004/882/EC. The selectivity, linearity, decision limit, detection capability, detection and quantification limits, precision, recovery, ruggedness, and measurement uncertainty of the method were determined. The limit of detection and limit of quantification values (μg/kg) were: aflatoxin B₁, 0.02, 0.07; aflatoxin B₂, 0.01, 0.02; aflatoxin G₁, 0.02, 0.07; and aflatoxin G₂, 0.01, 0.03. The relative standard deviation values for the repeatability and within-laboratory reproducibility were below 4 and 5 %, respectively. The recovery values of the spiked samples ranged from 80 to 105 %. These results complied with minimum performance criteria established by regulation 2006/401/EC. Therefore, the procedure can be implemented for the routine analysis of aflatoxins in the studied matrices.     

Combination of grey cotton fabric desizing and gassing treatments with a plasma aided process

In this study, corona plasma discharge was applied to desize polyvinyl alcohol (PVA) and starch on cotton fabrics. Plasma treated and non-treated samples were processed in various steps in a textile firm. The samples were tested to evaluate their weight loss, size dissolution, capillarity, dyeability, pilling resistance and strength values. The surface morphology and the chemical structures were examined by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscopy analyses. The experimental results showed that the plasma has positive effects on size removal, hydrophility and the pilling values of the PVA and also starch sized fabrics.     

Note: design and characterization of an optical light source based on mixture of white and near-ultraviolet light emitting diode spectra

An optical light source based on a solid-state lighting technology is designed. Main components of the light source are a phosphor-converted white and a near-ultraviolet (near-UV) light emitting diodes (LEDs), the spectral power distributions (SPDs) of which are mixed using a fiber optic combiner. The near-UV LED is used for improving insufficient SPDs of the white LED at shorter wavelengths of the visible radiation. Stable direct current power supplies are also designed and used to operate each of the LED separately. Three steps of the driving current can be selected by means of serial resistors altered with a commutator at nominal current values of ～40%, ～50%, and ～69%. The light source can be used for many characteristic measurements within the scope of photometry and colorimetry.     

Viscoelastic State for the Solutions of Spherically Symmetric Viscoelasticity Problems

The solutions of the spherically symmetric, linear, isothermal, and transient viscoelasticity problems via reciprocity theorem have been investigated for a specific material. The integral form of stress–strain relations has been used. The Laplace transform of a viscoelastic state, which is necessary for the integral equation arising as a result of reciprocity theorem, has been derived. This integral equation has been solved by Laplace transform. A sample problem has been solved to test the presented formulation. A numerical application of the analytic solution of this problem has been given.     

Production and characterization of carbon-based adsorbents from waste lignocellulosic biomass: their effectiveness in heavy metal removal

Abstract

In this study, hazelnut shell and walnut shell which are the agricultural wastes existent abundantly in many countries were pyrolyzed at different temperatures in the temperature range of 400–700?°C in order to optimize the physicochemical properties of biochars. The biochars with large surface area were used to removal of lead (Pb²⁺) ions, one of the most important heavy metal pollutant, from aqueous solutions. The characterization of raw biomass and also biochars produced by pyrolysis were performed using FT-IR, BET, SEM, partial and elemental analysis techniques. In order to determine the adsorption characteristics of both biochars, batch adsorption experiments were carried out under different experimental conditions. The optimum conditions were determined by investigating the effect of adsorption parameters (initial heavy metal concentration, temperature, adsorbent amount, pH, contact time and mixing speed) for efficient removal of Pb²⁺ ions from aqueous solution. The experimental results were investigated in terms of Langmuir, Freundlich and Temkin isotherm models. Together with the calculated thermodynamic parameters, the adsorption mechanism was tried to be explained. In order to determine the kinetic model of the adsorption process, the experimental data were applied to pseudo first-order, pseudo second-order and intra-particle diffusion model, and the model constants were investigated.     

Extraction of Avgamasya asphaltite with sub- and supercritical solvents

The yields and the nature of the products from the solvent extraction of Avgamasya asphaltite of SE Turkey with benzene and toluene under Soxhlet, subcritical (up to 292 °C) and supercritical (350–450 °C) conditions are reported. The subcritical yield increases with temperature but also depends on pressure; the extra yield is mainly of asphaltenes. The 350 °C supercritical toluene extract shows little evidence of thermal degradation and is similar in yield and chemical nature to that obtained under subcritical conditions except that it contains more pentane-soluble material. At 450 °C the yield is increased and a number of pyrolytic effects are observed, including reduction in molecular mass, loss of heterocyclic and alkyl groups and the presence of toluene decomposition products.