Placental villous stroma as a model system for myofibroblast differentiation

Different subtypes of myofibroblasts have been described according to their cytoskeletal protein patterns. It is quite likely that these different subtypes represent distinct steps of differentiation. We propose the human placental stem villi as a particularly suitable model to study this differentiation process. During the course of pregnancy, different types of placental villi develop by differentiation of the mesenchymal stroma surrounding the fetal blood vessels. In order to characterise the differentiation of placental stromal cells in the human placenta, the expression patterns of the cytoskeletal proteins vimentin, desmin, alpha- and gamma-smooth muscle actin, pan-actin, smooth muscle myosin, and the monoclonal antibody GB 42, a marker of myofibroblasts, were investigated on placental tissue of different gestational age (7th-40th week of gestation). Proliferation patterns were assessed with the proliferation markers MIB 1 and PCNA. Additionally, dipeptidyl peptidase IV distribution was studied in term placenta and the ultrastructure of placental stromal cells was assessed by electron microscopy. Different subpopulations of extravascular stromal cells were distinguished according to typical co-expression patterns of cytoskeletal proteins. Around the fetal stem vessels in term placental villi they were arranged as concentric layers with increasing stage of differentiation. A variable layer of extravascular stromal cells lying beneath the trophoblast expressed vimentin (V) or vimentin and desmin (VD). They were mitotically active. The next layer co-expressed vimentin, desmin, and alpha-smooth muscle actin (VDA). More centrally towards the fetal vessels, extravascular stromal cells co-expressed vimentin, desmin, alpha- and gamma-smooth muscle actin, and GB 42 (VDAG). Cells close to the fetal vessels additionally co-expressed smooth muscle myosin (VDAGM). Ultrastructurally, V cells resembled typical mesenchymal cells. VD cells corresponded to fibroblasts, while VDA and VDAG cells developed features of myofibroblasts. Cells of the VDAGM-type revealed a smooth muscle cell-related ultrastructure. In earlier stages of pregnancy, stromal cell types with less complex expression patterns prevailed. The media smooth muscle cells of the fetal vessels showed a mixture of different co-expression patterns. These cells were separated from extravascular stromal cells by a layer of collagen fibres. The results obtained indicate a clearly defined spatial differentiation gradient with increasing cytoskeletal complexity in human placental stromal cells from the superficial trophoblast towards the blood vessels in the centre of the stem villi. The spatial distribution of the various stages of differentiation suggests that human placental villi could be a useful model for the study of the differentiation of myofibroblasts.     

Immunohistochemistry of matrix metalloproteinases (MMP), their substrates, and their inhibitors (TIMP) during trophoblast invasion in the human placenta

The invasion of extravillous trophoblast cells into the maternal endometrium is one of the key events in human placentation. The ability of these cells to infiltrate the uterine wall and to anchor the placenta to it as well as their ability to infiltrate and to adjust utero-placental vessels to pregnancy depends, among other things, on their ability to secrete enzymes that degrade the extracellular matrix. Most of the latter enzymes belong to the family of matrix metalloproteinases. Their activity is regulated by the tissue inhibitors of matrix metalloproteinases. We have studied the distribution patterns of matrix metalloproteinases-1, -2, -3, and -9 and their inhibitors TIMP-1 and TIMP-2 as compared to the distribution of their substrates along the invasive pathway of extravillous trophoblast of 1st, 2nd, and 3rd trimester placentas by means of light microscopy on paraffin and cryostat sections as well as at the ultrastructural level (only 3rd trimester placenta). The comparison of different methods proved to be necessary, since the immunohistochemical distribution patterns of these soluble enzymes are considerably influenced by the pretreatment of tissues. All three methods revealed immunoreactivities of both, proteinases and their inhibitors, not only intracellularly in the extravillous trophoblast but also extracellularly in its surrounding matrix, the distribution patterns depending on the stage of pregnancy and on the degree of differentiation of trophoblast cells along their invasive pathway. Within the extracellular matrix, immunolocalization of matrix metalloproteinases as well as their inhibitors showed a specific relation to certain extracellular matrix molecules.     

Reduction of Chromite in Liquid Fe-Cr-C-Si Alloys

The kinetics and the mechanism of the reduction of chromite in Fe-Cr-C-Si alloys were studied in the temperature range of 1534 °C to 1702 °C under an inert argon atmosphere. The rotating cylinder technique was used. The melt consisted of 10 and 20 wt Pct chromium, the carbon content varied from 2.8 wt Pct to saturation, and the silicon content varied from 0 to 2 wt Pct. The rotational speed of the chromite cylinder ranged from 100 to 1000 rpm. The initial chromium to iron ratios of the melts varied between 0.11 and 0.26. In Fe-C melts, the effect of rotational speed on the reduction of chromite was very limited. Carbon saturation (5.4 wt Pct) of the alloy caused the reduction to increase 1.5 times over the reduction observed in the unsaturated (4.87 wt Pct) alloy at a given rotational speed. The addition of chromium to the carbon-saturated Fe-C alloy increased the reduction rate. The addition of silicon to the liquid phase increased the reduction rate drastically. The reduction of chromite in Fe-Cr-C melts is hindered because of the formation of, approximately, a 1.5-mm-thick M₇C₃-type carbide layer around the chromite cylinders. This carbide layer did not form when silicon was present in the melt. It was found that the reduction rate is controlled by the liquid-state mass transfer of oxygen. The calculated apparent activation energies for diffusion were 102.9 and 92.9 kJ/mol of oxygen in the Si-O and C-O systems, respectively.     

Laser cutting of 7050 Al alloy reinforced with Al2O3 and B4C composites

In the present study, laser cutting of 7050 aluminum alloy sheets reinforced with Al₂O₃ and B₄C particles are carried out. The cut geometry is examined using scanning electron microscope and the optical microscope. The lump parameter analysis technique is used to formulate and determine the kerf width size. The predictions for kerf width are compared with experimental data. The percentage kerf width size variation along the cut edges is determined and the influence of the laser power level and duty cycle of the laser pulses on the percentage kerf width size variation is examined. It is found that 7050 aluminum alloy reinforced with 20% Al₂O₃ composite results in relatively large kerf width size as compared to its counter parts that corresponding to 7050 aluminum alloy reinforced with 20% B₄C composite. The kerf width size predicted agreed with the experimental data for both composites.     

A Monolithic Phased Array Using 3-bit Distributed RF MEMS Phase Shifters

This paper presents a novel electronically scanning phased-array antenna with 128 switches monolithically implemented using RF microelectromechanical systems (MEMS) technology. The structure, which is designed at 15 GHz, consists of four linearly placed microstrip patch antennas, 3-bit distributed RF MEMS low-loss phase shifters, and a corporate feed network. MEMS switches and high-Q metal-air-metal capacitors are employed as loading elements in the phase shifter. The system is fabricated monolithically using an in-house surface micromachining process on a glass substrate and occupies an area of 6 cm times 5 cm. The measurement results show that the phase shifter can provide nearly 20deg/50deg/95deg phase shifts and their combinations at the expense of 1.5-dB average insertion loss at 15 GHz for eight combinations. It is also shown by measurements that the main beam can be steered to required directions by suitable settings of the RF MEMS phase shifters.     

Polarization Properties of Photoluminescence of Anisotropic Polymer Films Containing Aligned Au Nanorods and Semiconductor Nanoparticles of Various Shape

Semiconductors - Anisotropic polymer films containing aligned Au nanorods and semiconductor nanoparticles of various shape were fabricated. The photoluminescence of semiconductor nanoparticles in...     

Evaluating sociotechnical dynamics in a simulated remotely-piloted aircraft system: a layered dynamics approach

As coordination mechanisms change and technology failures occur, a sociotechnical system must reorganise itself across human and technological layers to maintain effectiveness. We present a study examining reorganisation across communication, controls and vehicle layers of a remotely-piloted aircraft system (RPAS) using a layered dynamics approach. Team members (pilot; navigator; photographer) performed 5 simulated RPAS missions using different operator configurations, including all-human and human-autonomy teams. Reorganization (operationally defined using entropy) time series measured the changing system reorganisation profiles under different operator configurations and following autonomy failures. Correlations between these reorganisation profiles and team effectiveness scores describe the manner in which the system had to be coordinated to maintain effectiveness under these changing conditions. Four unplanned autonomy failures were analysed to visualise system reorganisation following a technology failure. With its objective and real-time modelling and measurement capabilities, layered dynamics complements existing systems thinking tools for understanding sociotechnical complexity and enhancing system effectiveness.

Practitioner summary: A layered dynamics approach for understanding how a sociotechnical system dynamically reorganises itself is presented. The layered dynamics of RPAS were analysed under different operator configurations and following autonomy failures. Layered dynamics complements existing system-thinking tools for modelling sociotechnical system complexity and effectiveness.

Abbreviation: RPAS: remotely-piloted aircraft system; HIS: human-systems integration; EAST: event analysis of systemic teamwork; H1: hypothesis 1; H2: hypothesis 2; H3: hypothesis 3; CERTT-STE: cognitive engineering research on team tasks--synthetic task environment; AVO: air vehicle operator; PLO: payload operator; DEMPC: data exploitation, mission planning, and communications; ACT-R: adaptive control of thought-rational; sec: seconds; ANOVA: analysis of variance     

GPU-accelerated registration of hyperspectral images using KAZE features

The Journal of Supercomputing - Image registration is a common task in remote sensing, consisting in aligning different images of the same scene. In the particular case of hyperspectral images, the...