Reducing channel change delay in IPTV by predictive pre-joining of TV channels

One of the major concerns of IPTV network deployment is channel change delay (also known as zapping delay). This delay can add up to 2 s or more, and its main culprits are synchronisation and buffering of the media streams. Proving the importance of the problem is the already significant amount of literature addressing it. We start this paper with a survey of techniques proposed to reduce IPTV channel change delay.Then, by analysing an extensive dataset from an operational IPTV provider - comprising 255 thousand users, 150 TV channels, and covering a 6-month period - we have observed that most channel switching events are relatively predictable: users very frequently switch linearly, up or down to the next TV channel. This fact motivated us to use this dataset to analyse in detail a specific type of solutions to this problem, namely, predictive pre-joining of TV channels. In these schemes each set top box (STB) simultaneously joins additional multicast groups (TV channels) along with the one that is requested by the user. If the user switches to any of these channels the switching latency is virtually eliminated, not affecting therefore user's experience.We start by evaluating a simple scheme, where the neighbouring channels (i.e., channels adjacent to the requested one) are pre-joined by the STB during zapping periods. Notwithstanding the simplicity of this scheme, trace-driven simulations show that the zapping delay can be virtually eliminated for a significant percentage of channel switching requests. For example, when sending the previous and the next channel concurrently with the requested one, for only 1 min after a zapping event, switching delay is eliminated for close to half of all channel switching requests. Importantly, this result is achieved with a negligible increase of bandwidth utilisation in the access link. Other more complex schemes where user behaviour is tracked were also evaluated, but the improvement over the simple scheme was insignificant.     

Molecular differentiation of the species of two squid families (Loliginidae and Ommastrephidae) based on a PCR study of the 5S rDNA gene

The present study aimed to demonstrate the effectiveness of the 5s rDNA gene for the identification of commercially-valuable species of cephalopod belonging to the families Loliginidae and Ommastrephidae. Our results demonstrate distinct banding patterns in each of the six species sampled (Loligo surinamensis; Loligo sanpaulensis; Lolliguncula brevis; Sepiotheuthis sepioidea; Ornithoteuthis antillarum; Illex argentinus), as well as diagnostic traits at the genus and probably family levels. The results emphasize the efficiency of the 5s rDNA marker as a low-cost and rapid forensic technique, which not only permits the identification of species, but also differentiation of members of the Loliginidae and Ommastrephidae.     

Effect of the inelastic dynamic soil-structure interaction on the seismic vulnerability assessment

This paper presents a study of the influence of inelastic dynamic soil-structure interaction (DSSI) on the seismic vulnerability assessment of buildings. The seismic vulnerability is evaluated in terms of analytical fragility curves constructed on the basis of non-linear dynamic finite elements (FE) analysis. An analytical sensibility strategy is introduced in order to define a suitable size of the motion database to be used for computing fragility curves. The fragility curves developed in this study are compared with reference curves. Concerning the effect of the inelastic DSSI, a general reduction of seismic demand when DSSI phenomena are included is found. Derived fragility curve reflects this seismic demand reduction. The importance of the ground motion database is highlighted in terms of the variability of parameters describing derived fragility curves. Comparison with reference curves are satisfactory. Findings illustrate clearly the importance and the advantages of an adequate DSSI effects evaluation.     

Stress–strain relationship in axial compression for concrete using recycled saturated coarse aggregate

In this work the stress–strain curve of the recycled concretes was determined by replacing different percentages of the natural coarse aggregate with recycled coarse aggregate (20%, 50% and 100%). The results made it possible to establish the differences between the stress–strain relationship of a conventional concrete and this relationship for a recycled concrete depending on the percentage of replacement. In this way, it was found that the longitudinal strain of the recycled concretes increases with the percentage of recycled coarse aggregate used.Finally, using the experimental results, an analytical expression of the stress–strain curve accounting for the percentage of replacement was developed. The verification of the proposed model equation was done by comparing it to the experimental data. The results show that the proposed model equation satisfactorily describes the effect of the recycled aggregate on the stress–strain curve.     

Site‐Selectively Coated,Densely‐Packed Microprojection Array Patches for Targeted Delivery of Vaccines to Skin

Densely packed dry‐coated microprojections are shown to deliver vaccines to targeted locations within the skin that are rich in immune cells, thus inducing protective immune responses against a lethal virus challenge. Selectively limiting the antigen coating to the tips of the projections, which penetrate the skin, would significantly reduce the amount of vaccine required in immunization. In this paper a simple technique, dip‐coating the microprojections, is introduced to meet this goal. By increasing the coating solution viscosity, an otherwise strong capillary action is mitigated and the desired controlled coating length on projections is achieved. Following application to the skin, most of the coated vaccine material is rapidly released from the projections (82.6% in mass within 2 min) to the target locations within the skin strata and a potent immune response is induced when a conventional influenza vaccine (Fluvax) is tested in a mouse model. The utility of this coating approach to a variety of molecules representative of vaccines (e.g., chicken egg ovalbumin (OVA) protein, DNA, and fluorescent dyes) is demonstrated. These collective attributes, together with the simplicity of the approach, position the dip‐coating method for practical utility in large vaccination campaigns.     

A facile single-step procedure for the synthesis of luminescent Ln3+:YVO4 (Ln = Eu or Er + Yb)-silica nanocomposites

A simple and single-step method for the production of Ln-doped YVO₄ nanocrystals and their simultaneous encapsulation in a silica network based on the pyrolysis of liquid aerosols at 800 °C is reported. The procedure is illustrated for Yb,Er:YVO₄-silica nanocomposites consisting of spherical particles, which present up-converted green luminescence after IR excitation whose efficiency increased on annealing up to 1000 °C due to the release of impurities (adsorbed water, and residual anions). XPS spectroscopy and TEM observations revealed that the surface of the composite particles was enriched in silica, which would facilitate their functionalisation required to use them in biological applications. The procedure can also be used to prepare other rare earth doped systems as illustrated for the case of Eu-doped YVO₄/silica having down-converted red luminescence.     

Thermo-Metallurgical Modeling of Nodular Cast Iron Cooling Process

A new numerical model to describe the microstructural evolution of a eutectic nodular cast iron during its cooling is presented. In particular, equiaxial solidification assuming an independent nucleation of austenite and graphite nodules is considered. In this context, the austenite has dendritic growth whereas the graphite grows with a spherical shape. After solidification occurs, the model assumes that the graphite nodules present in the cast iron continue growing since the carbon content in austenite decreases. Once the stable eutectoid temperature is reached, the alloy undergoes the austenite-ferrite transformation. The nucleation of the ferrite takes place at the contour of the spherical graphite nodules where austenite has low carbon concentration. A ferrite shell surrounding the graphite nodules is formed afterward by means of a process governed by carbon diffusion. Then, a ferrite-pearlite competitive transformation occurs when the temperature is below the metastable temperature. This thermo-metallurgical model is discretized and solved by means of the finite element method. The model allows the computation of cooling curves, fraction evolution for each component, and size and distribution of graphite nodules. The present numerical results are compared with experiments using standardized Quick-cup-type cups, and satisfactory numerical predictions of the final microstructure and cooling curves are achieved.     

Identification of tool parallel axis offset through the analysis of the topography of surfaces machined by peripheral milling

A method for the identification of the tool parallel axis offset (TPAO) that occurs when the end mill is held in the spindle is developed. The method is based on the analysis of the topography of surfaces machined by peripheral milling and considers the cutter grinding errors. As known from the literature, TPAO causes each cutting edge to be at a different radius from the spindle axis and creates transition bands in the topography of milled surfaces, in which roughness grooves generated by different teeth blend together. In this paper, the TPAO, defined by the distance of the tool axis from the spindle axis and by an angle relating the offset direction to the position of cutting edges, is expressed as a function of the width of the roughness grooves at any height of the transition bands. This expression allows the TPAO to be estimated by measuring the groove widths at only two heights and solving a system of two linear equations. In order to obtain the groove widths, a procedure based on digital image processing is developed. Through this procedure, the groove widths are estimated at more than the two necessary heights without high computational cost. This leads to the resolution of an overdetermined system of linear equations that allows the TPAO to be identified with more accuracy. Finally in order to verify the predictions of the proposed method, a series of cutting tests were carried out. A reasonable agreement between the experimental results and the predicted ones was found.