Properties of aluminophosphate concretes containing various types of orthophosphoric acid

Conclusions The type of orthophosphoric acid has the maximum influence on the properties of corundum concretes, a lower influence on high-alumina concretes, and practically no influence on quartz-clay concretes. It is desirable to use wet-process orthophosphoric acid for refractory concretes. The excellent properties of concretes in the system A1₂O₃-SiO₂ based on this acid which is also cheaper enabled us to recommend it for preparing refractory concretes.The advantage of using H₃PO₄ of various types for corundum concretes is determined by the requirements placed on them in actual working conditions.Translated from Ogneupory, No.6, pp. 58–61, June, 1970.     

High-impact poly(ethylene terephthalate) blends

Rubbers of different kind were tested as toughening agents of poly(ethylene terephthalate) (PET), noting significant morphological and mechanical differences. In particular, good results were obtained by using an ethylene–ethyl acrylate–glycidyl methacrylate copolymer. The resulting blend evidenced good particle distribution, and the latter was related to chemical interactions between the rubber epoxy groups and PET terminal groups, including the effect of low molecular weight and polymeric amine catalysts, and to extrusion conditions. © 1995 John Wiley & Sons, Inc.     

Comparison of selective cytotoxicity of alkyl lysophospholipids

Alkyl lysophospholipids have been shown to be cytooxic to a number of neoplastic tissues. One, ET-18-OCH₃, has been used to selectively purge leukemic cells from mixtures with normal marrow progenitor cells,in vitro andin vivo. We have measured the 50% inhibitory (IC₅₀) effect of a series of ether, lipids (EL) on leukemic cells (HL60, K562, Daudi, KG-1, KG-1a) and normal marrow progenitor cells. Cells were incubated with varying concentrations of EL for 4 hr and assayed for viability, [³H]thymidine incorporation and clonogenicity in semi-solid media. The effect on protein kinase C (PKC) activity was assayed for each compound. Compounds tested included three glycerophosphocholine analogs-ET-18-OCH₃, ET-16-NHCOCH₃, and BM 41.440. In addition, a lipoidal amine, CP 46665, an ethyleneglycolphospholipid, AEPL, and four single chain alkylphosphocholine analogs, HePC₂, HePC₃, HePC₄ and HePC₆ were also tested. During the period of incubation, the cells remained viable (>70%) as judged by trypan blue dye exclusion. The glycerophosphocholines were the most active and showed the highest therapeutic index. The lipoidal amine was active, but toxic to normal marrow progenitor cells. The ethyleneglycolphospholipid was active against HL60, but not against the other cell lines. The single chain alkylphosphocholine analogs were less active. All of the compounds inhibited PKC activity; however, the glycerophosphocholines were the most inhibitory. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, Tokyo, Japan, May 1989.     

Basic-Composition Mixture for the Consumable Lining of Intermediate Ladles

Thermomechanical and chemical-ceramic properties of the PTMS basic-composition mixture for the consumable refractory lining of intermediate ladles in service at the Kombinat Magnezit Joint-Stock Co. are considered and some details of the fabrication technique are discussed. Results for the mixture tested for performance at various metallurgical plants are given. Advantages of the mixture for practical application, its microstructural characteristics in pre- and post-service conditions, and the wear behavior are discussed.     

POWER CONSUMPTION WITH ANCHOR MIXERS EFFECT OF BOTTOM CLEARANCE

The effect of bottom clearance on power draw for anchors is investigated. The results suggest that power input decreases as the bottom clearance ratio b/D increases. A new correlation is proposed in which both bottom and wall clearance effects on power input are considered. The dependence of power input on these effects is additive rather than multiplicative. Thus, the total power consumption is the sum of the power inputs generated by the wall and bottom clearance. Power results from 3D-CFD numerical simulations are also presented. These results confirm fairly well the experimental points.     

Explosive compaction of amorphous Cu−Sn powder prepared by the method of mechanical alloying

Novosibirsk. Translated from Fizika Goreniya i Vzryva, Vol. 25, No. 2, pp. 125–129, March–April, 1989.     

Polyether-metal salt complexes: 1. The elevation of the glass transition temperature of polyethers by metal salts

Various metal halides have been dispersed in high and low molecular weight, amorphous poly(propylene oxide), by solution blending techniques, to give single phase polymeric complexes which remained thermoplastic even at very high salt loadings. These complexes were amorphous and showed a single well-defined glass transition temperature (T_g) by differential thermal analysis with the T_g of the complex up to 140°C greater than the T_g of the parent polymer. The T_g elevation depended upon both the amount and the type of salt added and for a given salt the elevation followed a sigmoidal curve which levelled out at high salt concentrations. The T_g data have been interpreted in terms of a chelate ring model involving the co-ordination of two adjacent ether oxygen atoms in the polymer backbone to the salt. Using this model it was possible to consider the complex as a random copolymer consisting of complexed and uncomplexed monomer units. The contribution of crosslinking by metal salts to the elevation of T_g was assessed by studying poly(tetramethylene glycol)-zinc chloride complexes in which chelate formation is entropically unfavourable. Mechanical data are reported for ZnCl₂ complexes with high molecular weight poly(propylene oxide). The results indicate that ZnCl₂ increased the rubbery modulus and this has been interpreted in terms of ZnCl₂ forming a few, weak intermolecular crosslinks.