A new airmass independent formulation for the Linke turbidity coefficient

We propose a new formulation for the Linke turbidity coefficient with the objective of removing its dependence upon solar geometry. In the process, we also develop two new simple clear sky models for global and direct normal irradiance.     

A 150 MHz 0.6 μm BiCMOS superscalar microprocessor

An implementation of the Pentium microprocessor architecture in 0.6 μm BiCMOS technology is described. Power dissipation is reduced and performance is enhanced over the previous generation. Processor features, implementation technology, and circuit techniques are discussed. An internal clock rate of 150 MHz is achieved at 3.7 V and -55°C     

Dynamic Policy-Based Network Management for a Secure Coalition Environment

This article reports the latest results of an R&D effort to develop a prototype implementation of a dynamic policy-based network management (PBNM) system that can be used to configure and manage a secure network for a coalition environment across an unsecured wide area network. The prototype, based on a distributed architecture, includes capabilities for policy creation and management, dynamic policy negotiation, and dynamic policy provisioning. The policy negotiation facilitates the rapid deployment of a coalition network while the dynamic policy provisioning automates the configuration and management of network services including firewalls, virtual private network connections, routing, quality of service (QoS), and domain name services. Such a PBNM system enhances an organization's ability to react to network incidents identified by a network situational awareness assessment. Although the focus of the current research is a military coalition environment, the system can be used in any distributed enterprise or collaborative environment     

Surface chemistry of tribochemical reactions explored in ultrahigh vacuum conditions

The thermal decomposition of model extreme-pressure lubricant additives on clean iron was studied in ultrahigh vacuum conditions using molecular beam strategies. Methylene chloride and chloroform react to deposit a solid film consisting of FeCl₂ and carbon, and evolve only hydrogen into the gas phase. No gas-phase products and less carbon on the surface are detected in the case of carbon tetrachloride. Dimethyl and diethyl disulfide react on clean iron to deposit a saturated sulfur plus carbon layer at low temperatures (∼600 K) and an iron sulfide film onto a Fe + C underlayer at higher temperatures (∼950 K). Methane is the only gas-phase product when dimethyl disulfide reacts with iron. Ethylene and hydrogen are detected when diethyl disulfide is used.     

UPGRADING OF SUGAR CANE BAGASSE BY THERMAL PROCESSES. 5. CHARACTERIZATION OF THE OILS OBTAINED FROM COAL CO-PROCESSING WITH SUGARCANE BAGASSE OIL

In the present work, the chemical characterization of the oils obtained from liquefaction of different coals with sugar cane bagasse oil and also from the liquefaction of coal with monoethanolamine are presented. Characterization of the oil samples was done with the add of spectroscopic and chromatographic techniques, including UV-vis, FTIR, NMR, preparative liquid chromatography (PLC) and high resolution gas chromatography (HRGC).     

Performance degradation in feedback control due to constraints

In this note, we present a method to characterize the degradation in performance that arises in linear systems due to constraints imposed on the magnitude of the control signal to avoid saturation effects. We do this in the context of cheap control for tracking step signals.     

Towards a new definition of EPOC parameters for anionic electrochemical catalysts: case of propene combustion

The electrochemical promotion of catalysis (EPOC) of propene combustion was investigated using Pt sputtered thin film on an O²⁻ conductor, 8 mol% Y₂O₃-stabilized-ZrO₂ (YSZ). In order to separate the influence of the thermal migration of the O²⁻ oxide ions from the electrolyte to the catalyst surface and the impact of an electrical polarization on the catalytic activity, several light-off experiments (cool down and heat up procedures) were successively performed under different polarizations, i.e. OCV, +2 and −2 V. These experiments have clearly shown that the presence of O²⁻ (thermally or electrochemically induced) inhibits the catalytic activity of the platinum for the propene deep oxidation. These results demonstrate the importance to define a normalized rate enhancement ratio, ρ _n , from a reference value of the catalytic rate corresponding to a Pt surface state free of O²⁻ ions.     

Performance of a Yeast-mediated Biological Fuel Cell

Saccharomyces cerevisiae present in common Baker’s yeast was used in a microbial fuel cell in which glucose was the carbon source. Methylene blue was used as the electronophore in the anode compartment, while potassium ferricyanide and methylene blue were tested as electron acceptors in the cathode compartment. Microbes in a mediator-free environment were used as the control. The experiment was performed in both open and closed circuit configurations under different loads ranging from 100 kΩ to 400Ω. The eukaryotic S. cerevisiae-based fuel cell showed improved performance when methylene blue and ferricyanide were used as electron mediators, rendering a maximum power generation of 146.71±7.7 mW/m³. The fuel cell generated a maximum open circuit voltage of 383.6±1.5 mV and recorded a maximum efficiency of 28±1.8 % under 100 kΩ of external load.     

Optimization of semiochemical-based trapping ofMetamasius hemipterus sericeus (Olivier) (Coleoptera: Curculionidae)

Response of adults of the West Indian sugarcane weevil,Metamasius hemipterus sericeus, to various semiochemical treatments and physical trap designs was studied in southern Florida in field-grown banana and Canary Island date palms. Ethyl acetate released alone at 860–1007 mg/day was as effective for the capture ofM. h. sericeus as a combination of ethyl acetate (844–919 mg/day), ethyl propionate (348–362 mg/day), and ethyl butyrate (117–137 mg/day) and in one trial was more effective than fermenting sugarcane (250 g), ethyl propionate alone (353–384 mg/day), ethyl butyrate alone (123–174 mg/day), or no treatment. Ethyl acetate released alone at 675–683 mg/day was as attractive as 250 g of fermenting sugarcane or the racemic blend of the male-produced aggregation pheromones [(±)-5-methyl-nonan-4-ol and (±)-2-methyl-heptan-4-ol (8:1 ratio) “metalure”] at 3 mg/day. Weevil counts increased with binary combinations of ethyl acetate, sugarcane, and/or metalure over these treatments alone and the ternary combination was two to three times more effective than any of the binary treatments. Attraction to ethyl acetate released alone at 777 mg/day with metalure was greater than to the hydrolysis products of ethyl acetate (ethanol and/or acetic acid each released at about 6–8 mg/day) with metalure. Weevil counts from traps baited with 250 g of sugarcane and metalure increased with increasing dose of ethyl acetate to about 400 mg/day and then appeared to plateau. Ethyl acetate (about 700 mg/day) and metalure increased weevil counts in traps with increasing amounts of sugarcane (0–2 kg). Molasses (45 g) + water (158 ml) substitutes for sugarcane were about as effective for capturingM. h. sericeus as 250 g of fermenting sugarcane [all treatments with ethyl acetate (847 mg/day) and metalure]. Early experiments used a lethal pitfall trap. We demonstrated that several alternative trap designs were more effective than the lethal pitfall trap for capturing weevils. Color and height (on ground vs. 1 m on pole) did not affect trap efficacy when baited with the ternary combination of ethyl acetate (672–825 mg/day), sugarcane (250 g), and metalure.