The kinetics of dyeing: a non-isothermal approach

Non-isothermal kinetics can prove to be an effective tool for investigating exhaustion curves. Applying non-isothermal methods of analysis to exhaustion data for disperse dyes on polyester, it was shown that the intimate mechanism cannot be covered by a unique kinetic function, as the mechanism seems to be composed of several stages, each with its own kinetics. As a consequence, the overall kinetics change with both temperature and heating rate. It is suggested that such an analysis should be performed each time before proposing kinetic functions to fit the experimental data. Non-isothermal kinetic analysis also proves the impossibility of designing temperature-raising programmes that will ensure isoreactive dyeing for a blend of two or more dyes.     

Optimum utilization of the channel capacity of a satellite link inthe presence of amplitude scintillations and rain attenuation

By considering the global fading process on the link caused by rain attenuation and amplitude scintillations, particularly at K_a band, it is possible to derive a long-term statistical model of the satellite channel capacity. The four-parameter distribution, which combines amplitude scintillations and rain fade within an up/down link system, is presented. Also presented are the degradation (and improvement) of bit error rate (BER) in the presence of amplitude scintillations, thus complementing the flat fade effect due to rain only. By implementation of adaptive communication systems, a more efficient channel capacity utilization is possible. The concepts and the use of novel analytical expressions combining a log-normal model of rain fade with a Moulsley-Vilar distribution for scintillations are illustrated. These are then applied to a very-small-aperture terminal (VSAT) example of a 29/19-GHz digital communications link through the Olympus satellite using M-ary phase shift keying (PSK) modulation schemes     

A note on the radial wall jet with swirl

Summary The aim of this paper is a determinations of the space flow geometry of turbulent radial wall jet with swirl by means of a similarity analysis. It is assumed that except for a very thin layer near the wall, the flow field of the turbulent radial wall jet is similar. The wall conditions for a Newtonian fluid flow used in a paper by the present authors [11] — and satisfactory only for a laminar regime — are substituted by a suitable condition often employed in 3-D turbulent boundary layer problems. It is assumed that the direction of the shear-stress resultant is the same as the direction of the mean velocity-gradient resultant.With 3 Figures     

A virtual-reality-based telerehabilitation system with forcefeedback

A PC-based orthopedic rehabilitation system was developed for use at home, while allowing remote monitoring from the clinic. The home rehabilitation station has a Pentium II PC with a graphics accelerator, a Polhemus tracker and a multi-purpose haptic control interface. This novel interface is used to sample a patient's hand positions and to provide resistive forces using the Rutgers Master II (RMII) glove. A library of virtual rehabilitation routines was developed using WorldToolKit software. At the present time, it consists of three physical therapy exercises (DigiKey, ball and Power Putty) and two functional rehabilitation exercises (peg board and ball game). These virtual reality exercises allow automatic and transparent patient data collection into an Oracle database. A remote Pentium II PC is connected with the home-based PC over the Internet and an additional video conferencing connection. The remote computer runs an Oracle server to maintain the patient database, monitor progress and change the exercise level of difficulty. This allows for patient progress monitoring and repeat evaluations over time. The telerehabilitation system is undergoing clinical trials at Stanford Medical School, with progress being monitored from Rutgers University. Other haptic interfaces currently under development include devices for elbow and knee rehabilitation connected to the same system     

Progress on large area n‐type silicon solar cells with front laser doping and a rear emitter

We report on the progress of imec's n‐type passivated emitter, rear totally diffused rear junction silicon solar cells. Selective laser doping has been introduced in the flow, allowing the implementation of a shallow diffused front surface field and a reduction of the recombination current in the contact area. Simplifications have been implemented towards a more industrial annealing sequence, by replacing expensive forming gas annealing steps with a belt furnace annealing. By applying these improvements, together with an advanced texturing process and emitter passivation by atomic layer deposition of Al₂O₃, 22.5% efficient cells (three busbars) have been realized on commercial 156 · 156 mm² Czochralski‐Si. This result has been independently confirmed by ISE CalLab. Copyright © 2016 John Wiley & Sons, Ltd.     

Probing enzyme promiscuity of SGNH hydrolases

Several hydrolases of the SGNH superfamily, including the lipase SrLip from Streptomyces rimosus (Q93MW7), the acyl-CoA thioesterase I TesA from Pseudomonas aeruginosa (Q9HZY8) and the two lipolytic enzymes EstA (from P. aeruginosa, O33407) and EstP (from Pseudomonas putida, Q88QS0), were examined for promiscuity. These enzymes were tested against four chemically different classes of a total of 34 substrates known to be hydrolysed by esterases, thioesterases, lipases, phospholipases, Tweenases and proteases. Furthermore, they were also analysed with respect to their amino acid sequences and structural homology, and their phylogenetic relationship was determined. The Pseudomonas esterases EstA and EstP each have an N-terminal domain with catalytic activity together with a C-terminal autotransporter domain, and so the hybrid enzymes EstA(N)-EstP(C) and EstP(N)-EstA(C) were constructed by swapping the corresponding N- and C-terminal domains, and their hydrolytic activities were compared. Interestingly, substrate specificity and kinetic measurements indicated a significant influence of the autotransporter domains on the catalytic activities of these enzymes in solution. TesA, EstA and EstP were shown to function as esterases with different affinities and catalytic efficacies towards p-nitrophenyl butyrate. Of all the enzymes tested, only SrLip revealed lipase, phospholipase, esterase, thioesterase and Tweenase activities.     

Uptake of Cd, Zn and Mn by willow increases during terrestrialisation of initially ponded polluted sediments

Metal concentration of plants growing on contaminated soils among other factors may depend on changes in the hydrological regime of the soil. Foliar and stem metal concentrations in Salix cinerea (grey sallow) were measured in 2 consecutive growing seasons on a submerged sediment-derived soil that underwent gradual terrestrialisation. Foliar and stem cutting concentrations for Cd, Zn and Mn increased on plots that were submerged during the first year, but emerged in the second year of monitoring. The litter layer was sampled under the shrubs of a plot with a recent abrupt change in hydrological regime and on the reference plot. It was separated in three size fractions through sieving. Analysis of the litter fractions suggested that Cd and Zn concentrations remained constant during fragmentation. However, Cr, Cu, Ni and Pb concentrations increased, which was attributed to adhesion of mineral soil particles on the fine fraction. After correction for the metal content in the mineral fraction, an increase in Cd, Mn and Cu concentration during fragmentation of the organic part of the litter layer was observed for the polluted plot. Net litter layer decomposition rate was low, which may indicate low colonisation by the decomposing community. Terrestrialisation resulted in higher Cd, Mn and Zn uptake by willows. The deviant litter layer metal concentrations for Cd, Zn and Mn and low decomposition rate must be further monitored. Feasibility of measures aiming at re-establishing wetland conditions for the dredged sediment landfill must be considered.     

The Application of Mealworm (Tenebrio molitor) Oil in Cosmetic Formulations

The depletion of natural resources, the increasing use of valuable land surface for human activities, and the generation of waste are detrimental to the planet. Sustainable alternatives to guarantee a sufficient supply of food, feed, and biomaterials are needed. Insects may hold an interesting position in a circular economy to tackle contemporary societal challenges. Using insects for food, feed, biomaterial production, and to valorize side-streams, have gained increased interest. Mealworms are amenable to large-scale farming. Herein, the potential of mealworm oil for implementation in a cosmetic hand cream is evaluated. It is shown that mealworms are rich in oil (≈30% of the dry weight), and the oil can be extracted using hexane or ethyl acetate as a solvent. The euthanization step of mealworms has profound effect on the free fatty acid content. The fatty acid profile indicates a large proportion of unsaturated fatty acids, which is promising for use in cosmetic applications. In a proof of concept, the mealworm oil is implemented in a hand cream and compared to hand cream containing macadamia nut oil. No differences in odor and aspect/stability are observed, but mealworm creams are slightly less white color. Mealworm oil is suitable for cosmetics applications. Practical applications: Several insect species can be sustainably reared on low-value organic side-streams, requiring only small amounts of land-surface, less water, and producing less greenhouse gases. In addition, they have short life cycles and can be reared continuously and locally. This implies that insects are an interesting source of biological materials including proteins and oils. Insect oils, including oil of mealworms, have interesting fatty acid profiles that make them amenable to replace oils of vegetable origin for applications within cosmetics. The results indicate that mealworm oil can be a novel, sustainable ingredient for use in the cosmetics industry.     

Mineralogy of air-pollution-control residues from a secondary lead smelter: environmental implications

The mineralogy and solubility of air-pollution-control (APC) residues from a secondary lead (Pb) smelter have been studied on samples from the Príbram smelter, Czech Republic, recycling car batteries, with the emphasis on their potential environmental effect. The presence of dominant anglesite (PbSO4) and laurionite (Pb(OH)Cl) was observed in a sintered residue from after-burning chambers (800-1000 degrees C). In contrast, low-temperature Pb-bearing phases, such as KCl x 2PbCl2 and caracolite (Na3Pb2(SO4)3Cl), were detected in the major APC residue from bag-type fabric filters. Metallic elements, zinc (Zn), cadmium (Cd), and tin (Sn) were found homogeneously distributed within this residue. The formation of anglesite, cotunnite (PbCl2), (Zn,Cd)2SnO4, and (Sb,As)2O3 was observed during the sintering of this APC residue at 500 degrees C in a rotary furnace. The 168 h leaching test on filter residue, representing the fraction that may escape the flue gas treatment system, indicated rapid release of Pb and other contaminants. Caracolite and KCl x 2PbCl2 are significantly dissolved, and anglesite and cotunnite form the alteration products, as was confirmed by mineralogical analysis and PHREEQC-2 modeling. The observed Pb-bearing chlorides have significantly higher solubility than anglesite and, following emission from the smelter stack, can readily dissolve, transferring Pb into the environmental milieu (soils, water, inhabited areas).