Impurity ‘Hot Spots’ in MBE HgCdTe/CdZnTe

In this work, impurity ‘hot spot’ macro-defects—high impurity level macro-defect contaminates were examined. ‘Hot spots’ have very high localized concentrations of: K, Mg, Ni, Cr, Mn, Ca, Al, Na, Fe, and Cu. For example, these ‘hot spot’ macro-defects can have Cu concentrations >?1?×?10¹⁸ cm^?3. Focused ion beam scanning transmission electron microscopy analysis of four ‘hot spots’ was performed. The origin of ‘hot spot’ defects is unresolved—however, our analysis has shown ‘hot spots’ can arise due to molecular beam epitaxy spit defects and CdZnTe substrate defects. The estimated ‘hot spot’ density is ～?30 cm^?2. The presence of impurity ‘hot spot’ macro-defects in HgCdTe/CdZnTe is confirming evidence for the occurrence of L. Bubulac’s impurity ‘pipe’ mechanism.     

Linking entrepreneurial orientation to project success

Entrepreneurial orientation (EO) is a strategic posture of an organization, and it is related to basic policies and practices for the development of entrepreneurial actions looking for creating competitive advantages. This study develops and tests a model of the relationship between entrepreneurial orientation and project success in Brazilian context. As quantitative research, a survey was used to collect data. A sample of 100 valid answers from project practitioners was treated through the structural equation modeling method. As research implications, the main result points out the positive correlation between the entrepreneurial orientation and the project success, contributing to the development of this research subject and helping to minimize the gap in the literature that addresses the relationship between project success and EO. In practical terms, understanding that innovativeness, risk taking, proactiveness, autonomy and competitive aggressiveness (the dimensions of the EO) can contribute to project success and can also indirectly impact on organizational performance, could help organizations get competitive advantage when developing correlate factors. Finally, the results suggest that practices of project management can be aligned to the firm's entrepreneurial orientation to enable firms to attain better results in their projects and generate a competitive advantage. On other hand, given the proportion of the impact of EO on project success (20.3%) identified in this study, it is critical that project management professionals expand their horizon to recognize other factors that affect project success.     

OWL‐based acquisition and editing of computer‐interpretable guidelines with the CompGuide editor

Computer‐Interpretable Guidelines (CIGs) are the dominant medium for the delivery of clinical decision support, given the evidence‐based nature of their source material. Therefore, these machine‐readable versions have the ability to improve practitioner performance and conformance to standards, with availability at the point and time of care. The formalisation of Clinical Practice Guideline knowledge in a machine‐readable format is a crucial task to make it suitable for the integration in Clinical Decision Support Systems. However, the current tools for this purpose reveal shortcomings with respect to their ease of use and the support offered during CIG acquisition and editing. In this work, we characterise the current landscape of CIG acquisition tools based on the properties of guideline visualisation, organisation, simplicity, automation, manipulation of knowledge elements, and guideline storage and dissemination. Additionally, we describe the CompGuide Editor, a tool for the acquisition of CIGs in the CompGuide model for Clinical Practice Guidelines that also allows the editing of previously encoded guidelines. The Editor guides the users throughout the process of guideline encoding and does not require proficiency in any programming language. The features of the CIG encoding process are revealed through a comparison with already established tools for CIG acquisition.     

Reactive ion etching of PECVD silicon nitride in SF6 plasma

The reactive ion etching of PECVD silicon nitride thin films has been investigated using SF₆ plasma. Effects of variations of process parameters such as pressure (50–350 mTorr), RF power (50–250 W), gas flow rate (3–130 sccm) and additions of O₂ and He (0–50%) in SF₆, on the PECVD silicon nitride etch rate and selectivity to the AZ 1350J photoresist were examined. An etch rate of 1 μm/min has been obtained under the condition of 150 mTorr, 100 W and 60 sccm. Experimental results also indicated a maximum etch rate at approximately 30% O₂ while addition of He showed only dilution effect. A nitride/photoresist selectivity ranging from 1 to 3:1 has been obtained.     

Analysis of an extensive measurement program developed from the start up to the follow up of the operation of the CNAAA NPP

Integrated tests (IT) applied to the Units I and II of the CNAAA Nuclear Power Plants (Angra dos Reis, Rio de Janeiro, Brazil) vara part of a comprehensive test program required to have the commercial operational licence issued. The IT cover operation at zero power and the subsequent power levels (the power escalation) until the nominal power operation.

This paper reports and compares the results of systematic neutron and gamma equivalent dose-rate measurements performed inside and outside the reactor containment of each Unit, during the start-up phase of the operation, for different power levels of the reactors. It also compares the collective-doses measured along the operation of the two units of the CNAAA wich similar data of the Grafenrheinfeld nuclear power plant (Germany) — basic-of-project for the CNAAA — Unit II — and analyses the data under the fight of the state-of-art.     

Study of polypropylene/polybutene blends modified by gamma irradiation and (high melt strength polypropylene)/polybutene blends

It is well-known that polypropylene (PP) is difficult to process as a consequence of its linear structure. It is also known that grafting of long-chain branches on PP backbone using ionizing radiation is an effective approach to achieve high melt strength polypropylene (HMS PP). Chain-scission and, in minor extend, crosslinking and grafting are the predominant reaction in order to branch PP backbone. However, if multifunctional monomers are used to promote the grafting reaction, crosslinking can surpass chain scission and grafting, reducing drawability. Therefore, in an effort to enhance the processability and so the drawability, it has been found helpful to add a small amount of polybutene-1. Gamma irradiation technique was used to induce chemical changes in blends of PP and polybutene in acetylene atmosphere (crosslinker promoter) and in HMSPP/polybutene blends. The samples were irradiated with a ⁶⁰Co source with doses of 12.5 and 20 kGy in the presence of acetylene. In this work, two different methods of blends processing were compared regarding rheological and mechanical properties. Effects on the strength and elongation at the yield point and at rupture were observed by mechanical tests and showed decrease of tensile strength and increase of elongation at rupture for samples obtained by irradiation of blends. The results from rheology demonstrated an increase in melt strength and drawability of blends.     

Kinetics of Soybean Oil Hydrolysis on Niobium Catalysts

The catalytic hydrolysis of soybean oil was used as an alternative for the production of monoglycerides (MG) and diglycerides (DG). The reactions were conducted in a stainless-steel tubular reactor in the temperature range of 240–290 °C, on niobium phosphate (NBP) and niobium oxide (NBO) as catalysts. In the hydrolysis reactions at 270 °C, the maximum selectivities of the products of interest were obtained at 22 % MG and 48 % DG for the reaction with NBP, and 7 % MG and 33 % DG with NBO, for 59 % and 36 % of triglyceride conversion in 10 min, respectively. The proposed kinetic model presented a good fit of the theoretical model with the experimental data, showing that the previous hypotheses considered for the mechanism development are suitable for describing the kinetics of soybean oil hydrolysis.     

Development of low-alcohol isotonic beer by interrupted fermentation

Alcohol-free beer with isotonic properties is getting more popular and its production can be carried out by different production strategies; however, interrupted fermentation is still a challenge. Therefore, the objective of this study was to develop a low-alcohol isotonic beer (<0.5% v/v) by interrupted fermentation. Moreover, the major objective is to compare the developed product to commercial beverages (sports drinks, ‘Pilsen' regular beer, alcohol-free beers and low-alcohol isotonic beer). The beverages were evaluated based on pH, alcohol content (% v/v), total titratable acidity (mEq L⁻¹), osmolality (mOsmol kg⁻¹), bitterness International Bitterness Units, colour European Brewery Convention, total phenolic compounds (mg L⁻¹ gallic acid), reducing and total sugars (%) and Na and K contents (mg L⁻¹). The developed low-alcohol isotonic beer presented characteristics similar to sports drinks, with the advantage of being richer in phenolic compounds and suitable osmolality. Despite salts were added in its formulation, the grades attributed to all beers employed in the sensory evaluation, as well as the purchase intention did not present significant differences.     

Hybrid methodology for precipitation estimation using Hydro-Estimator over Brazil

Rainfall measurement is a very important topic to society and for the understanding of the weather and climate, therefore needs to be calculated as accurately as possible. Counteracting the problem of the high temporal and spatial variability of precipitation, geostationary satellites sensors have been proved an excellent tool to this task, providing scans with high temporal resolution and detecting the growth and decay of rain cells. Using infra-red (IR) images obtained from the Geostationary Operational Environmental Satellites (GOES), the Hydro-Estimator (HYDRO) algorithm produces instantaneous precipitation estimates with 30 min temporal resolution and 4 km spatial resolution with a very low latency compared with other more sophisticated methodologies (i.e. passive microwave-based algorithms). However, the IR algorithm has some limitations to estimate precipitation on some cloud systems. In order to overcome this problem, the main objective of this study is to develop a light and fast algorithm, based on the histogram matching (HM) technique, to combine the superior sampling and low latency of the HYDRO IR product with more accurate active microwave-based products over Brazil. The adjusted HYDRO (AHYDRO) product was validated against Brazil rain gauge network for two years (2016–2017) and the performance was assessed by using standard statistical metrics and categorical indices. Results show that the HM technique is able to minimize the large variability and discrepancies among HYDRO and observed precipitation over Brazil. At same time, is able to generate a better bias performance while maintaining the same correlation levels before the adjustment.