An evolutionary approach to the delineation of functional areas based on travel-to-work flows

This paper presents a new approach to the delineation of local labor markets based on evolutionary computation. The aim of the exercise is the division of a given territory into functional regions based on travel-to-work flows. Such regions are defined so that a high degree of inter-regional separation and of intra-regional integration in both cases in terms of commuting flows is guaranteed. Additional requirements include the absence of overlap between delineated regions and the exhaustive coverage of the whole territory. The procedure is based on the maximization of a fitness function that measures aggregate intra-region interaction under constraints of inter-region separation and minimum size. In the experimentation stage, two variations of the fitness function are used, and the process is also applied as a final stage for the optimization of the results from one of the most successful existing methods, which are used by the British authorities for the delineation of travel-to-work areas （TTWAs）. The empirical exercise is conducted using real data for a sufficiently large territory that is considered to be representative given the density and variety of travel-to-work patterns that it embraces. The paper includes the quantitative comparison with alternative traditional methods, the assessment of the performance of the set of operators which has been specifically designed to handle the regionalization problem and the evaluation of the convergence process. The robustness of the solutions, something crucial in a research and policy-making context, is also discussed in the paper.     

The Influence of Oxygen Volumetric Mass Transfer Rates on Cyclodextrin Glycosyltransferase Production by Alkaliphilic Bacillus circulans in Batch and Fed-Batch Cultivations

In this work, the influence of oxygen mass transfer rates on the production of cyclodextrin glycosyltransferase (CGTase) by the alkaliphilic bacterium Bacillus circulans ATCC 21783 was investigated. Experimental design and response surface methodology were applied to optimize agitation speed and air flow rate in batch cultivations, in order to identify their significant effects and interactions with the synthesis of CGTase. Results were expressed as the volumetric mass transfer rates of oxygen (k_la, [per hour]). The maximal CGTase productivity of 155 U mL⁻¹ h⁻¹ was achieved with k_la of 48 h⁻¹. CGTase production was also studied in fed-batch cultures using the optimized parameters obtained in the batch experiments. The maximal CGTase productivity on fed-batch cultivations was 137 U mL⁻¹ h⁻¹ with feeding rates of starch at 0.17 g L⁻¹ h⁻¹.     

Zuverlässige Prozesse durch Vakuumkomponenten mit definierten Ausgasraten

Reliable processes by use of vacuum components with specified outgassing rates Contamination of vacuum components cannot be avoided in the manufacturing process. In order to significantly reduce particulate and organic impurities, a multi-stage cleaning process and proof of cleanliness are essential. In order to guarantee a reproducible quality of the cleanliness of vacuum components, uniform standards for defined outgassing rates are necessary. The development of Vacom Purity Classes serves the generally accessible specification of components and characterises their vacuum and cleanroom suitability. Vacom Vacuum Classes guarantee the suitability of vacuum components for use in UHV/XHV. In this article, the importance of cleaning of vacuum chambers and components is examined as well as the need to establish a uniform method for the quantitative measurement of the outgassing rate is highlighted. The systematic division into Vacom Purity and Vacuum Classes provides the basis for a cross-industry standard for the defined quality of vacuum processes.     

Validation of an LC-MS/MS method for malachite green (MG), leucomalachite green (LMG), crystal violet (CV) and leucocrystal violet (LCV) residues in fish and shrimp

A quantitative liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for the simultaneous analyses of malachite green (MG), crystal violet (CV) and its major metabolites, leucomalachite green (LMG) and leucocrystal violet (LCV) residues in fish and shrimp samples has been validated. Fish and shrimp samples were extracted with citrate buffer/acetonitrile, and the extracts were purified on strong cation-exchange (SCX) solid-phase extraction (SPE) cartridge. After conversion of LMG into MG using a post column oxidation reactor containing lead (IV) oxide (PbO(2)), the effluents were analysed. Residues were analysed using positive-ion electrospray ionisation (ESI). Identification and quantification of analytes were based on the ion transitions monitored by multiple reaction monitoring (MRM). Validation of the method was carried out in accordance with the Decision 2002/657/EC, which establishes criteria and procedures for the validation of methods. The following parameters were determined: decision limit (CCα), detection capability (CCβ), linearity, accuracy, precision, selectivity, specificity and matrix effect. The decision limits (CCα) for MG, LMG, CV and LCV were 0.164, 0.161, 0.248 and 0.860 μg kg(-1). The respective detection capabilities (CCβ) were 0.222, 0.218, 0.355 and 1.162 μg kg(-1). Typical recoveries (intermediate precision) in shrimp, for MG, CV, LMG and LCV for 2.0 μg kg(-1) level fortified samples using the optimised procedure were in the range 69%, 97%, 80.3% and 71.8%, respectively. The findings demonstrate the suitability of the method to detect simultaneously MG, CV and its metabolite (LMG and LCV) in fish and shrimp.     

Influence of chlorhexidine in cavities prepared with ultrasonic or diamond tips on microtensile bond strength

This study evaluated the effect of chlorhexidine (CLX) in cavities prepared with either ultrasound-mounted CVDentUS diamond tips or conventional diamond burs on dentin bond strength after 24 h and 180 days. Forty-eight dentin surfaces from sound third molars were flattened and divided into four groups (n = 12), according to the type of cavity preparation (CVDentUS ultrasound tip or conventional diamond) and with or without 2% CLX (Consepsis) treatment. After application of the adhesive system (Clearfil SE Bond), microhybrid composite resin blocks (Charisma) were made on the dentin surface in increments. After 24 h, the specimens were sectioned into stick-shaped samples with an adhesive interface of approximately 1 mm². From each tooth, half of the sticks were evaluated after 24 h of storage in distilled water and the other half after 180 days, using a universal testing machine. Three-way analysis of variance showed no significant triple interactions (p = 0.722) or double interactions between factors. Higher bond strength values were observed with the use of ultrasonic tips (p = 0.019), irrespective of whether or not CLX was applied in either time period. No difference in bond strength values was observed in terms of CLX application (p = 0.581). No significant difference in bond strength values was shown after storage for 24 h or 180 days (p = 0.302). In conclusion, the ultrasonic tips promoted greater bond strength to dentin, irrespective of whether or not CLX was applied, and storage time.     

Endodontic irrigants effect on long-term intraradicular adhesion of resin cements

The aim of this study was to evaluate over time the bond strength of dual-cure and self-adhesive resin cements used for bonding fiberglass posts following irrigation with different solutions. Ninety roots from single-rooted premolars were selected and divided into 6 groups (n = 15) according to the resin cement, dual-cure or self-adhesive (RelyX ARC and RelyX U100) or the endodontic irrigant used (2% chlorhexidine digluconate - CH, 1% sodium hypochlorite - SH and deionized distilled water – control). Following post cementation, the roots were cross-sectioned in order to obtain two slices from each root third (cervical, mid and apical). The specimens were stored for 7 or 180 days in water and the push-out bond strength test applied. The data was analyzed using three-way ANOVA and Tukey Kramer. The interaction endodontic irrigants-resin cement vs. storage time was significant (p = 0.008), where 7 days of storage induced no difference between the groups, however, after 180 days, the groups for which CH or SH combined with RelyX U100 were used showed higher bond strength values than RelyX ARC, regardless of the irrigant solution. There was no difference between the use of RelyX ARC after 7 and 180 days of storage. For Rely X U100 180 days of storage increased the push-out bond strength when either CH or SH was used. The dual-cure and self-adhesive resin cements associated with CH or SH demonstrated similar immediate bond strength performance. The self-adhesive cement, however, showed improved bond strength over time when either irrigant was used.