Modification of coconut fibers with polyaniline for manufacture of pressure‐sensitive devices

This article studies the modification of coconut fibers with polyaniline (PAni) with help of statistical experimental design techniques. The main factors studied here were the techniques used for particle dispersion (sonication vs. magnetic stirring) and the type of initiator (ammonium persulfate, APS, vs. ammonium cerium sulfate dihydrate, Ce(IV)). The obtained materials were characterized through low field nuclear magnetic resonance, small‐and wide‐angle X‐ray scattering, scanning electron microscopy, fourier transform infrared spectroscopy, and ultraviolet–visible spectroscopy. Additionally, the electrical resistivities and respective sensitivities to variations of the applied pressure were evaluated for all obtained samples, with help of standard volume resistivity measurements and electro‐mechanical tests. The materials prepared through magnetic stirring with APS presented the best electrical and electromechanical properties, although materials prepared through sonication with Ce(IV) also presented good electrical and electromechanical properties and could be prepared much faster. As a consequence, modification of coconut fibers with PAni, using sonication as the particle dispersion technique and Ce(IV) as initiator, constitutes a very promising procedure for manufacture of pressure‐sensitive devices. POLYM. ENG. SCI., 54:2887–2895, 2014. © 2014 Society of Plastics Engineers     

Influence of acceleration setting reaction by halogen light‐curing on GIC–dentin interface: Qualitative analysis by SEM

The aim of this study was to evaluate by scanning electron microscope (SEM) photomicrographs the influence of application of halogen light‐curing for fastening the set reaction of high‐viscosity glass ionomer cements (GIC) by assessing the material/dentin interface. Twelve human primary canines were assigned in four groups (n = 3) according to the GIC (Fuji IX, GC or Maxxion R, FGM) and application of halogen light‐curing (60 sec or control—no external energy). Blocks with approximately 6 mm of height were buildup on previously pre‐treated dentin surface in according to the experimental group. After storage at 37 °C, 100% humidity for 48 h, the specimens were then sectioned in slices with 1‐mm thick. The slices were qualitative analyzed using SEM to evaluate possible structural changes. Two examiners independently evaluated the images in order to observe the spherical hollow spaces of each tooth. The photomicrographs revealed the presence of spherical hollow spaces in all experimental groups. However, in both groups that received halogen light‐curing application, it was possible to observe that the presence of these hollow spaces decreased in size and quantity. It can be concluded that the halogen light‐curing application positively decreases in size and quantity in the presence of spherical hollow spaces in GIC.     

Hematopoietic progenitor constituents and adherent cell progenitor morphology isolated from black-rumped agouti (Dasyprocta prymnolopha, Wagler 1831) bone marrow

Stem cells are present in the adult tissues of most diverse species. Bone marrow is recognized to be the most exploited site to obtain stem cells and cell progenitors. The objective of the present study was to characterize hematopoietic progenitor (HP) morphology and analyze the performance of adherent cell progenitors (ACPs) cultivated in vitro from black‐rumped agouti bone marrow (Dasyprocta prymnolopha). Bone marrow aspirates were obtained from tibia crest and used to prepare histological slides and identify cell morphology. Cells were also scattered on culture plates for later isolation, expansion, and quantification. Smears obtained from bone marrow demonstrated HPs at different stages of maturity. In culture, these cells showed fibroblastoid morphology and a strong tendency to form colonies, demonstrated by the presence of cell aggregates, cytoplasmic elongations lying side by side. An 80% cell confluence was observed at 18 days in culture and progressive reduction in the percentage of nonadherent mononuclear cells. After eight passes, a mean cell viability of 96.07% was observed, from a pool of 1.6 × 10⁷ cells (ACP). Thirteen 25‐cm² culture bottles were trypsinized, resuspended in freezing medium, stored in 14 criotubes at a concentration of 1 × 10⁶ cells per milliliter, and placed in liquid nitrogen at ?196°C. Agouti bone marrow demonstrated high plasticity, moreover different HP lines, and a population of adherent cells demonstrated morphology similar to mesenchymal stem cells in culture. Microsc. Res. Tech. 2012. © 2012 Wiley Periodicals, Inc.     

Comparing different methods to fix and to dehydrate cells on alginate hydrogel scaffolds using scanning electron microscopy

Scanning electron microscopy (SEM) is commonly used in the analysis of scaffolds morphology, as well as cell attachment, morphology and spreading on to the scaffolds. However, so far a specific methodology to prepare the alginate hydrogel (AH) scaffolds for SEM analysis has not been evaluated. This study compared different methods to fix/dehydrate cells in AH scaffolds for SEM analysis. AH scaffolds were prepared and seeded with NIH/3T3 cell line; fixed with glutaraldehyde, osmium tetroxide, or the freeze drying method and analyzed by SEM. Results demonstrated that the freeze dried method interferes less with cell morphology and density, and preserves the scaffolds structure. The fixation with glutaraldehyde did not affect cells morphology and density; however, the scaffolds morphology was affected in some level. The fixation with osmium tetroxide interfered in the natural structure of cells and scaffold. In conclusion the freeze drying and glutaraldehyde are suitable methods for cell fixation in AH scaffold for SEM, although scaffolds structure seems to be affected by glutaraldehyde. Microsc. Res. Tech. 78:553–561, 2015. © 2015 Wiley Periodicals, Inc.     

Efficient dye-sensitized solar cells based on the combination of ZnO nanorods and microflowers

Well-aligned ZnO nanorod films were grown onto transparent conducting substrates by using an aqueous solution route. The presence of some reflections in the X-ray diffraction pattern of the ZnO films indicates the vertical alignment of the nanorods along the c axis of the wurtzite hexagonal structure. Well-aligned ZnO nanorods were observed by scanning electron microscopy. The presence of top ZnO microflower layers over the ZnO nanorod film was observed for all growth times studied. The ZnO nanorods with ZnO microflower top layers were applied as photoelectrodes in dye-sensitized solar cells. Higher photocurrent densities and photovoltages were observed with longer nanorod growth times. The high performance of the dye-sensitized solar cells might be associated to the combination of ZnO nanorods and microflowers in the same photoelectrode.     

Overview of the scientific production in the Pharmacy area in Brazil: profile and productivity of researchers granted with fellowships by the National Council for Scientific and Technological Development

In Brazil, the National Council for Scientific and Technological Development (CNPq) distributes productivity fellowships in research (RS) as a recognition to individuals with outstanding productivity levels in their areas. The aim of this study is to evaluate the scientific production of the Brazilian Pharmacy area, one division of the Health Sciences Great Area of CNPq, considering the profile and productivity levels of RS fellows. The results showed that most of the 156 active RS fellows in 2015 were female, with doctorate completed in the Southeast region (mainly in University of São Paulo) and with research activities developed in the South and Southeast regions. Most of their work was published in journals classified as B1 and B2 Qualis in Pharmacy by the Coordination for the Improvement of Higher Education Personnel (CAPES), with high prevalence of publications in local journals and/or specialized on medicinal plants. Besides, they featured much dependence on advising and productivity indexes related to the category and level of RS fellowship. The evolution of such data must be continually evaluated to determine the influence of CNPq productivity fellowships on performance and stratification of researchers in the Pharmacy area in Brazil.     

Biocompatibility and cutaneous reactivity of cellulosic polysaccharide film in induced skin wounds in rats

The development of a skin substitute suitable for immediately performing the function of the lost dermis and epidermis could result in a positive impact on the treatment of patients with extensive skin lesions. A biopolymer film was applied to skin wounds to investigate the biocompatibility and cutaneous reaction and to test its activity as a mechanical barrier and conductor in the healing process. Forty Wistar rats of both sexes were used in the present study. Two excisions were performed in the dorsal part of the skin flaps. The polysaccharide film was applied over one of the incisions and other incision was washed with saline. The time spent for complete healing of both lesions was virtually the same in both groups, during 21 days of observation. The film remained attached to the bed of the exposed wound for an average period of 6 days. There were no statistically significant differences with regard to lesion measurement area at assessment times of 2nd, 7th and 14th postoperative days. At day 21, the scar area showed a significant difference (0.0229). After 40 days, all wounds were completely healed. No statistically significant differences were found between the histological parameters assessed in the experimental and control groups. The cellulosic polysaccharide film integrated well with the tissue showing high biocompatibility and low skin reactivity.     

Reversible suppression of the so-called fishtail effect in ultra pure single crystals of YBa2Cu3O7−δ achieved by proper oxygenation

We report on the absence of the so-called fishtail or peak effect in the magnetisation curves of properly oxygenated high purity (5N) single crystals of YBa₂Cu₃O_7–. As we recently reported [1] high pressure oxygenation procedures are suitable to produce a monotonous dependence of the critical current density with the magnetic field. In this article we report furthermore how to reversibly produce or remove this effect on the same crystal by proper oxygenation methods. Along with the high purity of the samples, — due to crystal growth in non reactive BaZrO₃ crucibles —, this proves that at least in pure samples the fishtail effect is due to different oxygenation states and/or oxygen distributions. In less pure samples, however, other sources for this anomaly like metallic impurities can act as an additional source for the fishtail anomaly.     

Microstructure,composition and critical current density of superconducting Nb3Sn wires

The production of superconducting Nb₃Sn multifilamentary wires with optimized critical currents requires a detailed knowledge of various processes, involving both the mechanical deformation and the reaction kinetics. The physical properties of the Nb₃Sn phase are briefly reviewed, the precise knowledge of their variation as a function of the Sn content being essential for the optimization of the critical current density, J_c. The variation of the transition temperature T_c, the upper critical field, B_c2(0), and the normal state electric resistivity ρ_o, as a function of the Sn content, β, in the binary system Nb_1?βSn_β is carefully analyzed. The effect of Ta, Ti and Ta + Ti additives to Nb₃Sn on the physical properties is discussed in detail. Low temperature specific heat measurements are introduced for determining the T_c distribution inside Nb₃Sn filaments while avoiding shielding effects.The microstructure of the superconducting phase in Bronze Route and Internal Sn Diffusion processed wires is studied, taking into account the unique microstructure of Bronze Route filaments, comprising an equiaxed and a columnar grain region, their areas being comparable. The Sn content increases gradually, from 18 to 22 at.% in columnar and from 22 to 25 at.% in equiaxed grains. Taking into account the equiaxed grains only in Bronze Route wires, it is found that the pinning force density F_GB is essentially the same as in the superconducting part of Internal Sn and PIT wires. The lower values of the overall F_GB in Bronze Route wires is due to the presence of columnar grains, with lower T_c and B_c2. The presence of columnar grains also explains the deviation from linearity of the Kramer rule in Bronze Route wires.The mechanism leading to the variation of J_c vs. ε, where ε is the uniaxial applied strain, is correlated to the elastic tetragonal distortion of the A15 phase in the filaments, caused by the matrix precompression or by Lorentz forces. The behavior of J_c (ε) is found to show systematic differences between Bronze Route and Internal Sn processed wires. Possible reasons for the stronger variation of J_c (ε) up to 21 T in Internal Sn wires are discussed.