Differential scanning calorimetry evaluation of oxidation stability of docosahexaenoic acid in microalgae cells and their extracts

The aim of this work was to evaluate the oxidative stability of docosahexaenoic acid (DHA) from Aurantiochytrium limacinum SR21 microalgae cells and in their lipidic extract by differential scanning calorimetry (DSC). Besides, freezing was evaluated as a strategy for microalgal DHA long‐term conservation by analysing changes in their thermal properties. As a first approach, mixtures of the most representative A. limacinum SR21‐fatty acids were evaluated in model systems. DHA and palmitic acid were the major polyunsaturated and saturated fatty acids produced by the microalgae cells, respectively. Changes in DHA/palmitic acid ratio in model systems, in cells and their lipidic extracts, were detected by DSC through shifts in the oxidation onset temperature (OOT) values. However, OOT values of cells and lipidic extracts could be also influenced by cellular compartmentalisation, carotenoids and other components presence. Freezing was not a good strategy for DHA long‐term conservation, as revealed by OOT values and thermal properties, which reflected the extensive changes that occurred during storage.     

Interactions of Cr(VI) and Cr(III) with isolated rat liver mitochondria

The mechanism of interaction of Cr(VI) with isolated rat liver mitochondria was investigated in this study. The results suggest that Cr(VI) induces the opening of the membrane permeability transition pore (MPT). The phenomenon is cyclosporine-sensitive and is in agreement with the cyclosporine-sensitive apoptosis observed in the cells incubated with this compound. Moreover the action of Cr(III), that is formed in the cells by a reduction of Cr(VI), has been also analysed. The results obtained demonstrated that the Cr(III) does not induce the opening of the MPT in isolated mitochondria, but it has a protective effect in preventing Cr(VI) MPT opening. Therefore, these results suggest that apoptosis is regulated by a balance between Cr(VI) accumulation in the cytoplasm and Cr(III) formation.     

Indoor persistent organic pollutants in agricultural areas from Argentina

Persistent Organic Pollutants (POPs) are anthropogenic chemicals extensively used in the past for industrial and agricultural purposes, characterized by their lipophilicity, ubiquity, volatility and environmental persistence. By other hand, chlorpyrifos is the most widely used current pesticide (CUPs) being the main insecticide used for crops in Argentina. The aim of this work was to assess levels of POPs and CUPs in different fractions of airborne particles collected indoor in agricultural areas from Argentina. Particles higher than 2.5 µm were trapped in polyurethane foams (PUF) while particles smaller than 1 µm and volatile compounds were adsorbed on activated charcoal. Compounds were analyzed by gas chromatograph with electron capture detector (GC-ECD). Endosulfans, chlordanes, PCBs, and HCHs were detected in all PUF samples, while endosulfans, chlorpyrifos, PCBs, and HCHs were the most abundant in smaller particles. Majority of pesticides showed higher concentrations during the summer season (1397.7 vs 832.5 pg/m³). Even adding up all measured organic compounds, no sample reaches the threshold limit value for indoor pesticides levels (0.1 pg/m³), neither in the large or small particle fraction. However, the fact that chronic exposure to POPs has been linked to several diseases raises concern for human health.     

Isolation and Identification of Bacillus spp. and Related Genera from Different Starchy Foods

ABSTRACT: Samples of butternut squash, potatoes, rice, and wheat flour were analyzed. Bacillus spp. and related species belonging to Paenibacillus and Brevibacillus genera were found in 96% of the samples. In butternut squash, predominant species were Bacillus pumilus and Paenibacillus polymyxa together with other Bacillus spp. species (B. cereus, B. licheniformis, B. sphaericus, and B. subtilis). In all the potato samples, Bacillus species were detected (B. cereus, B. mycoides, and B. licheniformis). Also, Bacillus spp. were detected in 100% of the unhusked rice samples, while incidence in white rice samples was 83%. In total rice samples, B. pumilus, Brevibacillus brevis, and Paenibacillus macerans were the main species and B. cereus, P. polymyxa, B. subtilis, and Brevibacillus laterosporus had the lower percentage. The most important species found in wheat flour was P. polymyxa with colony forming units per gram of about 10². As the identified species were potentially causatives of foodborne diseases, attention should be given to sanitary and temperature conditions as critical factors that influence the safety and shelf life of these products. Practical Application: Foodborne illness produce by B. cereus have been associated with a wide variety of food. In addition, some other Bacillus species have been related to foodborne disease in humans. Information about the virulence mechanisms of other Bacillus spp. is scanty and their risk is underestimated. Identifying the group of food and the food processes in which Bacillus cereus or other Bacillus spp. would be hazardous for human health is vital for the prevention of foodborne outbreak. In this study, we determined the incidence of Bacillus spp. and related genera in some food items of agriculture origin from Argentina. This research is relevant to identify the presence of potentially pathogen Bacillus species and related genera in this type of food.     

Isolation and characterization of the flour and starch of plantain bananas (Musa paradisiaca)

Plantain bananas of the variety “Terra” (Musa paradisiaca) may have industrial value due to their high starch content. In this research, the flour and starch of such unripe fruit were isolated and their chemical, physicochemical, and structural characteristics were determined. Banana flour and starch had a dry basis yield of 50.6 and 28.5%, and an average granule size of 31.7 and 47.3 µm, respectively. Both raw materials revealed a C‐type pattern and high gelatinization temperatures. The peak viscosity was greater for flour (378.0 RVU) than for starch (252.6 RVU), although the final viscosity was lower. At temperatures above 65°C, the swelling power of banana flour was lower than that of starch, while the solubility of flour was greater than that of starch at all temperatures. Furthermore, the presence of other components in banana flour influenced its physicochemical properties. In general, the flour and starch processed from unripe bananas have numerous possible uses as ingredients in food systems and for other industrial purposes.     

Adsorption isotherms of pinhão (Araucaria angustifolia seeds) starch and thermodynamic analysis

The seeds of Araucaria angustifolia, commonly known as pinhão, are widely consumed in both Southern and Southeastern Brazil due to their high nutritious value comprised basically by starch. The literature on the technological aspects of this seed is still very scarce. Moisture adsorption isotherms of pinhão starch were determined at 10, 20, 30 and 40 °C using the gravimetric method. Results show that the Peleg model most appropriately represents the experimental data. Other models (Chung–Pfost, GAB, Henderson, BET and Chirife) also were found to adjust well. The isosteric heat of sorption (differential enthalpy) was calculated by using the moisture adsorption isotherm and decreased as moisture content increased. The enthalpy–entropy compensation theory was applied to adsorption isotherms and the isokinetic temperature for pinhão starch was calculated by plotting the differential enthalpy versus differential entropy. It was found that the adsorption process investigated was enthalpy-controlled and spontaneous.     

Effects of different additives on bimetallic Au-Pt nanoparticles electrodeposited onto indium tin oxide electrodes

Bimetallic Au-Pt nanoparticles (Au-Pt_NPs) have been synthesized using an electrochemical reduction approach. The effects of the addition of different additives in the electrodeposition bath namely KI, 1-nonanesulfonic acid sodium salt and Triton X-100 have been investigated. The structural characterization of the bimetallic nanoparticles has been carried out using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), UV-vis spectroscopy, X-ray diffraction (XRD) and cyclic voltammetry (CV). The Au-Pt_NPs prepared in the presence of KI and Triton X-100 characterized by a relatively narrow size distribution as well as a higher particle density and surface coverage whereas no changes in the morphology were observed. These results suggest a dependence of the size and distribution of the bimetallic nanoparticles from the type and concentration of the additives employed.     

Development of functionalized Fe–Al–Cr alloy fibers as innovative catalytic oxidation devices

Catalytic devices play a very important role to drastically reduce the noxious contaminants released by the combustion engines. Common devices consist of functionalized ceramic monoliths; an interesting alternative can be realized with a support material made of a high temperature compatible metal alloy, like FeCrAl. In the present study the FeAlCr fibers used to make a device similar to the ceramic monolith were thermally treated to obtain alumina whiskers, which were homogenously covered with alumina or ceria–zirconia–alumina washcoats. Pt or Pt and Pd have been loaded over the functionalized fibers obtaining an innovative oxidation catalyst. The systems were characterized by BET surface area measurements, hydrogen chemisorption and tested under high space velocity and fast heating run-up cycles, for hydrocarbon and CO conversion and particulate filtration ability. The good catalytic activity after severe aging treatments confirms the possibility of use of these innovative functionalized metallic stacks in air pollution control applications.     

Enhanced Hydrogen Production by Photoreforming of Renewable Oxygenates Through Nanostructured Fe2O3 Polymorphs

Sunlight‐driven hydrogen production via photoreforming of aqueous solutions containing renewable compounds is an attractive option for sustainable energy generation with reduced carbon footprint. Nevertheless, the absence of photocatalysts combining high efficiency and stability upon solar light activation has up to date strongly hindered the development of this technology. Herein, two scarcely investigated iron(III) oxide polymorphs, β‐ and ε‐Fe₂O₃, possessing a remarkable activity in sunlight‐activated H₂ generation from aqueous solutions of renewable oxygenates (i.e., ethanol, glycerol, glucose) are reported. For β‐Fe₂O₃ and ε‐Fe₂O₃, H₂ production rates up to 225 and 125 mmol h^?1 m^?2 are obtained, with significantly superior performances with respect to the commonly investigated α‐Fe₂O₃.     

Candida albicans Tpk1p and Tpk2p isoforms differentially regulate pseudohyphal development, biofilm structure, cell aggregation and adhesins expression

Candida albicans undergoes a reversible morphological transition from single yeast cells to pseudohyphal and hyphal filaments. In this organism, cAMP-dependent protein kinase (PKA), coded by two catalytic subunits (TPK1 and TPK2) and one regulatory subunit (BCY1), mediates basic cellular processes, such as the yeast-to-hypha transition and cell cycle regulation. It is known that both Tpk isoforms play positive roles in vegetative growth and filamentation, although distinct roles have been found in virulence, stress response and glycogen storage. However, little is known regarding the participation of Tpk1p and/or Tpk2p in pseudohyphal development. This point was addressed using several C. albicans PKA mutants having heterozygous or homozygous deletions of TPK1 and/or TPK2 in different BCY1 genetic backgrounds. We observed that under hypha-only inducing conditions, all BCY1 heterozygous strains shifted growth toward pseudohyphal morphology; however, the pseudohypha:hypha ratio was higher in strains devoid of TPK2. Under pseudohypha-only inducing conditions, strains lacking TPK2 were prone to develop short and branched pseudohyphae. In tpk2 Δ/tpk2 Δ strains, biofilm architecture was markedly less dense, composed of short pseudohyphae and blastospores with reduced adhesion ability to abiotic material, suggesting a significant defect in cell adherence. Immunolabelling assays showed a decreased expression of adhesins Als1p and Als3p only in the tpk2 Δ/tpk2 Δ strain. Complementation of this mutant with a wild-type copy of TPK2 restored all the altered functions: pseudohyphae elongation, biofilm composition, cell aggregation and adhesins expression. Our study suggests that the Tpk2p isoform may be part of a mechanism underlying not only polarized pseudohyphal morphogenesis but also cell adherence.