On the Tensile Properties of Inconel 718 Fabricated by EBM for As-Built and Heat-Treated Components

Analysis of mechanical properties of Nickel-based superalloy (Inconel 718) components fabricated by additive manufacturing using electron beam melting is presented for two conditions: as-built and heat-treated, and for different sets of processing parameters. The average yield strength increased from 980 to 1180 MPa, and the ultimate strength increased from 1160 to 1350 MPa, while microhardness increased from 410 HV in the as-built condition to 470 HV in the heat-treated condition. However, the corresponding elongation at fracture decreased from 8.2 pct for the as-built components to 6.5 pct for heat-treated components. The mechanical behavior is mostly independent of the processing parameters applied, enabling achievement of higher built-up rates by means of higher scanning velocities.     

A symmetric method for weakly imposing Dirichlet boundary conditions in embedded finite element meshes

In this paper, we propose a way to weakly prescribe Dirichlet boundary conditions in embedded finite element meshes. The key feature of the method is that the algorithmic parameter of the formulation which allows to ensure stability is independent of the numerical approximation, relatively small, and can be fixed a priori. Moreover, the formulation is symmetric for symmetric problems. An additional element-discontinuous stress field is used to enforce the boundary conditions in the Poisson problem. Additional terms are required in order to guarantee stability in the convection–diffusion equation and the Stokes problem. The proposed method is then easily extended to the transient Navier–Stokes equations. Copyright © 2012 John Wiley & Sons, Ltd.     

Migration of mineral oil from printed paperboard into dry foods: survey of the German market

From the German market, 119 samples of dry food were analyzed for the migration of mineral oil. The products selected were packed in paperboard boxes and intended for storage for extended periods of time at ambient temperature. The 0.6 mg/kg limit for mineral oil saturated hydrocarbons (MOSH) derived from the WHO/JECFA evaluation was frequently exceeded by a factor of 10–100. Typically, 10–20% of the migrating mineral oil consisted of aromatic hydrocarbons (MOAH). Most samples were merely 2–3 months old and far from the end of their shelf life (usually 1–3 years). From the assumption that about 70% of the MOSH and MOAH which are eluted from GC up to the C₂₄ n-alkane (<C24) end up in the food (potential of migration), it was estimated that migration might almost triple before the products reach the end of their shelf life, reaching 31 mg/kg on average, with several samples exceeding 100 mg/kg. At the time of the analysis, products without an internal bag and with a bag of paper or polyethylene reached up to about 80% of the potential of migration (average, 30–50%). Bags of polypropylene, acrylate-coated polypropylene, PET or with an aluminum layer seemed to block migration (with one possible exception), but it was premature to reach conclusions on long-term functional barrier properties. From the comparison with <C₂₄ MOSH concentrations in unprinted recycled paperboards, it was estimated than on average about a quarter of the migrating mineral oil was from printing ink used for decorating the box.     

Monitoring Smartphones for Anomaly Detection

In this paper we demonstrate how to monitor a smartphone running Symbian operating system and Windows Mobile in order to extract features for anomaly detection. These features are sent to a remote server because running a complex intrusion detection system on this kind of mobile device still is not feasible due to capability and hardware limitations. We give examples on how to compute relevant features and introduce the top ten applications used by mobile phone users based on a study in 2005. The usage of these applications is recorded by a monitoring client and visualized. Additionally, monitoring results of public and self-written malwares are shown. For improving monitoring client performance, Principal Component Analysis was applied which lead to a decrease of about 80% of the amount of monitored features.     

Feasibility of Monitoring Tumor Response by Tracking Nanoparticle-Labelled T Cells Using X-ray Fluorescence Imaging—A Numerical Study

Immunotherapy has been a breakthrough in cancer treatment, yet only a subgroup of patients responds to these novel drugs. Parameters such as cytotoxic T-cell infiltration into the tumor have been proposed for the early evaluation and prediction of therapeutic response, demanded for non-invasive, sensitive and longitudinal imaging. We have evaluated the feasibility of X-ray fluorescence imaging (XFI) to track immune cells and thus monitor the immune response. For that, we have performed Monte Carlo simulations using a mouse voxel model. Spherical targets, enriched with gold or palladium fluorescence agents, were positioned within the model and imaged using a monochromatic photon beam of 53 or 85 keV. Based on our simulation results, XFI may detect as few as 730 to 2400 T cells labelled with 195 pg gold each when imaging subcutaneous tumors in mice, with a spatial resolution of 1 mm. However, the detection threshold is influenced by the depth of the tumor as surrounding tissue increases scattering and absorption, especially when utilizing palladium imaging agents with low-energy characteristic fluorescence photons. Further evaluation and conduction of in vivo animal experiments will be required to validate and advance these promising results.     

Determination of the total acid number (TAN) of used gas engine oils by IR and chemometrics applying a combined strategy for variable selection

The most common analyses carried out to assess gas engine oil quality include determination of viscosity, total base number (TBN), and total acid number (TAN). TAN has been considered to be an important indicator of oil quality, specifically in terms of defining oxidation and the extent of acidic contamination of used oils. TAN can be determined by potentiometric titration, and typical values for used oils can reach up to 4 mg KOH/g. A more convenient approach for the determination of TAN is based on infrared (IR) spectral data and multivariate regression models.We developed partial least-squares (PLS) models for the determination of TAN using IR data measured from monograde mineral gas engine oils (SAE 40, medium ash) that have been used in sewer and wood gas engines run with gaseous fuels from a sewage plant and a wood gasification plant, respectively. The final model performance was 0.07 mg KOH/g for the standard error of prediction (SEP). Essential for the development of powerful empirical models was an appropriate variable selection by combining expert knowledge, biPLS or dyn-biPLS, and a genetic algorithm. The optimum complexities of the models (the number of PLS components) and their prediction performances have been estimated by repeated double cross validation (rdCV).     

Sintering Behavior and Microstructure Formation of Titanium Aluminide Alloys Processed by Metal Injection Molding

The sintering behavior of metal injection molded titanium aluminide alloys, their microstructure formation and resulting mechanical properties were investigated. As reference material, the alloy Ti-45Al-5Nb-0.2B-0.2C at.% (TNB-V5) was selected. Additionally, two other variations with Mo and Mo + Si additions were prepared: Ti-45Al-3Nb-1Mo-0.2B-0.2C at.% and Ti-45Al-3Nb-1Mo-1Si-0.2B-0.2C at.%. The results indicate that the optimum sintering temperature was slightly above the solidus line. With proper sintering parameters, very low porosities (<0.5%) and fine microstructures with a colony size <85 µm could be achieved. Considering the sintering temperatures applied, the phase transformations upon cooling could be described as L + β → β → α + β → α → α + γ → α₂ + γ, which was in agreement with the microstructures observed. The effects of Mo and Si were opposite regarding the sintering behavior. Mo addition led to an increase in the optimum sintering temperature, whereas Si caused a significant decrease.     

Phospholipases and galactolipases trigger oxylipin-mediated wound-activated defence in the red alga Gracilaria chilensis against epiphytes

We investigated the wound response of the commercially important red alga, Gracilaria chilensis, in order to obtain insight into its interaction with epiphytic pests. After wounding, the host releases free fatty acids as well as the hydroxylated eicosanoids, 8R-hydroxy eicosatetraenoic acid (8-HETE) and 7S,8R-dihydroxy eicosatetraenoic acid (7,8-di-HETE). While the release of free arachidonic acid and subsequent formation of 8-HETE is controlled by phospholipase A, 7,8-di-HETE production is independent of this lipase. This dihydroxylated fatty acid might be directly released from galactolipids. Physiologically relevant concentrations of oxylipins reduced spore settlement of Acrochaetium sp. (Rhodophyta, Acrochaetiaceae) and suppressed the development of hapteria in Ceramium rubrum (Rhodophyta, Ceramiaceae) when these model epiphytes were exposed to artificial surfaces that contained 8-HETE or 7,8-di-HETE. Thus, the immediate release of oxylipins can be seen as G. chilensis defence against epiphytes.     

The effect of increased yeast alcohol acetyltransferase and esterase activity on the flavour profiles of wine and distillates

The fruity odours of wine are largely derived from the synthesis of esters and higher alcohols during yeast fermentation. The ATF1- and ATF2-encoded alcohol acetyltransferases of S. cerevisiae are responsible for the synthesis of ethyl acetate and isoamyl acetate esters, while the EHT1-encoded ethanol hexanoyl transferase is responsible for synthesizing ethyl caproate. However, esters such as these might be degraded by the IAH1-encoded esterase. The objectives of this study were: (a) to overexpress the genes encoding ester-synthesizing and ester-degrading enzymes in wine yeast; (b) to prepare Colombard table wines and base wines for distillation using these modified strains; and (c) to analyse and compare the ester concentrations and aroma profiles of these wines and distillates. The overexpression of ATF1 significantly increased the concentrations of ethyl acetate, isoamyl acetate, 2-phenylethyl acetate and ethyl caproate, while the overexpression of ATF2 affected the concentrations of ethyl acetate and isoamyl acetate to a lesser degree. The overexpression of IAH1 resulted in a significant decrease in ethyl acetate, isoamyl acetate, hexyl acetate and 2-phenylethyl acetate. The overexpression of EHT1 resulted in a marked increase in ethyl caproate, ethyl caprylate and ethyl caprate. The flavour profile of the wines and distillates prepared using the modified strains were also significantly altered as indicated by formal sensory analysis. This study offers prospects for the development of wine yeast starter strains with optimized ester-producing capability that could assist winemakers in their effort to consistently produce wine and distillates such as brandy to definable flavour specifications and styles.     

Determining the binding affinities of phenolic compounds to proteins by quenching of the intrinsic tryptophan fluorescence

The noncovalent binding of selected phenolic compounds (chlorogenic-, ferulic-, gallic acid, quercetin, rutin, and isoquercetin) to proteins (HSA, BSA, soy glycinin, and lysozyme) was studied by an indirect method applying the quenching of intrinsic tryptophan fluorescence. From the data obtained, the binding constants were calculated by nonlinear regression (one site binding; y = Bx/k + x). It has been reported that tannins inhibit human salivary amylase and that these complexes may reduce the development of cariogenic plaques. Further, amylase contains two tryptophan residues in its active site. Therefore, in a second part of the study involving 31 human subjects, evidence was sought for noncovalent interactions between the phenols of green tea and saliva proteins as measured by the fluorescence intensity. Amylase activity was determined before and after the addition of green tea to saliva of 31 subjects. Forty percent of the subjects showed an increase in amylase activity contrary to studies reporting only a decrease in activity. The interactions of tannin with amylase result in a decrease of its activity. It still remains to be elucidated why amylase does not react uniformly under conditions of applying green tea to saliva. Further, in terms of using phenols as caries inhibitors this finding should be of importance.