Effect of design of a sex-pheromone-baited delta trap on behavior and catch of maleEpiphyas postvittana (Walker)

Through field trials and wind-tunnel studies, we have demonstrated that certain structural features of a sex-pheromone-baited delta trap affect catch of light-brown apple moth,Epiphyas postvittana, males, by influencing behaviors used to enter and exit the trap. Field catch of males was dependent upon length (and width) of the trap, with increases in length yielding linear increases in catch. In the wind tunnel, similar numbers of males entered the two traps, but significantly fewer males exited the longer trap within 1 min after entering it. Although males landed on the sticky surface at similar distances from the downwind entrances of the traps, they were stuck farther upwind on the longer trap. Thus, it is probable that the increase in field catch with increase in trap length relates to the increase in distance (and hence time) that males walk on the sticky surface, towards the pheromone source, before attempting to exit. The bottom barriers (as well as additional barriers at the top and sides) at the entrances of the trap also significantly influenced trap catch. The barriers apparently influence trap catch in two ways. Firstly, they hinder the exit of males from the trap, thus diverting males back into the trap and increasing their chance of being caught. Secondly, they influence where the male lands on the sticky surface; with higher barriers, males land farther upwind (i.e., nearer the source), and thus farther from an exit. Finally, as the source was suspended higher above a horizontal surface, greater numbers of males landed on the source. This result shows that the position where a maleE. postvittana lands is influenced by the relationship of the source to the surface and suggests that trap catch of males may similarly be influenced (i.e., by inducing males to land farther from the exits).     

Novel Gas-Liquid-Solid Reactors

Multiphase reactors involving gas, liquid, and solid phases have several important applications in the chemical industry, particularly in catalytic processes. Some of the well-known examples are: hydrogenation and oxidation of organic compounds, hydro-processing coal-derived and petroleum oils, Fischer-Tropsch synthesis, and methanation reactions. Due to the presence of three phases, the problem of reactor design is often important to achieve effective mass and heat transfer as well as a mixing pattern favorable to the particular process. The reactors are mainly of two types: (a) solid catalyst is suspended either by mechanical agitation or gas-induced agitation and (b) solid catalyst is in a fixed bed with concurrent or countercurrent feed of gas and liquid re-actants. The reactor types conventionally used in industry are: (a) mechanically agitated or bubble column slurry reactors and (b) trickle-bed or packed-bed bubble reactor. The various design and modeling aspects of these reactors have been reviewed by Satterfield [1], Chaudhari and Ramachandran [2], Shah [3,4], Ramachandran and Chaudhari [5], Shah et al. [6], and Herskowitz and Smith [7]. In several industrial processes these reactor designs are modified to achieve a certain specific objective, such as better heat or mass transfer, higher catalyst efficiency, better reactor performance and selectivity, etc. Similarly, specially designed reactors are often used for laboratory kinetic studies or to understand a certain phenomenon. Thus, novel multiphase reactors are becoming important from both academic and industrial viewpoints. Some of the recently introduced novel gas-liquid-solid reactor types are: (a) loop recycle slurry reactors, (b) basket-type reactors, (c) ebullated-bed reactors, (d) internal or external recycle reactors, (e) multistage slurry or packed-bed reactors, (f) column reactors with sieve trays or multiple agitators, (g) gas-induced agitated reactors, and (h) horizontal-packed-bed reactors. are being used in several new commercial processes, and various design aspects, such as hydrodynamics and mass and heat transfer, have been the subject of investigations in the last few years. However, no attempt to review the scattered information on these novel gas-liquid-solid reactors has been made. Therefore, the main objective of this paper is to review important developments in novel gas-liquid-solid reactors. For each type of reactor, advantages, disadvantages, and applications are discussed. Further, the status of information on hydrodynamics and mass transfer parameters and scale-up considerations is reviewed. These novel reactor designs are being used in several new commercial processes, and various design aspects, such as hydrodynamics and mass and heat transfer, have been the subject of investigations in the last few years. However, no attempt to review the scattered information on these novel gas-liquid-solid reactors has been made. Therefore, the main objective of this paper is to review important developments in novel gas-liquid-solid reactors. For each type of reactor, advantages, disadvantages, and applications are discussed. Further, the status of information on hydrodynamics and mass transfer parameters and scale-up considerations is reviewed.     

Short contact time dissolution of vitrinite and inertinite concentrates

The short contact time dissolution of vitrinite and inertinite concentrates of an Australian bituminous coal was studied under isothermal conditions with tetralin as solvent. The reactivity of the two maceral types and the yields and nature of the products were determined for a range of reaction temperatures (400, 420 and 440 °C) and reaction times (2–20 min). The dissolution of vitrinite proceeded at a significantly greater rate than for inertinite and was associated with greater selectivity to soluble non-gaseous products. At very short reaction times (2 min), the vitrinite underwent solubilizing reactions to yield products of higher molecular weight and greater oxygen functionality than was the case for inertinite, for which changes in the chemical nature of the products were negligible over the range of conditions studied. At longer reaction times (5 min), the composition of the vitrinite-derived products was similar to that of the inertinite-derived products.     

Effects of core-yarn overfeed on texturing performance: comparison between air-jet and steam-jet texturing

The objectives of this research work were to investigate the use of high-pressure steam in order to replace air in the production of spun-like textured yarns and to investigate the optimum level of core-yarn overfeed ratio for steam-jet textured yarn for the application of sewing threads. An existing air-jet texturing machine was modified to supply either air or steam to the texturing nozzle. Using an identical nozzle, both air-jet and steam-jet textured yarns were manufactured. Loop instability and loop density increased and strength and tenacity decreased when the core-yarn overfeed was increased in both air-jet and steam-jet textured yarns. Steam-jet textured yarns have lower loop instability, lower loop density and higher tensile properties than that of the air-jet textured yarns. Sewability results show that for both air-jet and steam-jet textured sewing threads, core-yarn overfeed ratios of 5.5 and 8.3% give better sewability.     

Detection of genetic variation with radioactive ligands. I. Electrophoretic screening of plasma proteins with a selected panel of compounds

To detect new genetic variation in human plasma proteins, a panel of 63 radioactive substances were screened as potential radioligands using polyacrylamide gel electrophoresis (PAGE) and autoradiography. Vitamins, hormones, drugs, amino acids, purines, pyrimidines, sugars and lipids labeled with 14C or other radionuclides were among those substances tested. A majority bound to albumin and a smaller fraction to prealbumins and lipoproteins. Several vitamins and hormones bound to specific alpha and beta globulins. (1) Electrophoretic polymorphisms of vitamin D-binding protein (group-specific component), a vitamin B12-binding protein (transcobalamin II), and thyroxine-binding alpha-globulin are described elsewhere. (2) Testosterone-binding beta-globulin (TeBG) showed an electrophoretic polymorphism in Caucasians and a possible deficiency allele. (3) Transcortin showed an electrophoretic doublet in all persons tested but no electrophoretic variation. (4) A protein binding derivative of norepinephrine or epinephrine was identified as transferrin. (5) A nonpolymorphic protein running cathodal to albumin and binding a derivative of riboflavin was tentatively identified as a fraction of albumin with mobility altered as a result of interaction with the ligand.     

Role of estradiol-17 beta and progesterone in regulating constriction of ovine uterine arteries

Fistulas between the abdominal aorta and renal vein are exceedingly rare. Diagnostic delays are not unusual. Correction can be extremely difficult because of anatomical distortion and size of the arterialized veins. A young woman with such a fistula following a gunshot wound is presented. Four years following injury, the fistula was repaired successfully during intentional arrest of the circulation for 7 minutes. This was accomplished with deep hypothermia and cardiopulmonary bypass. No serious problems occurred during the operation. The patient tolerated the procedure well and has been relieved of her symptoms completely. Most patients with traumatic or spontaneous arteriovenous fistulas can be managed safely and effectively by conventional operative techniques. In selected situations, the risk of total circulatory arrest and deep hypothermia may be less than the risk of uncontrollable bleeding inherent in conventional techniques. Suggested indications for use of total circulatory arrest in vascular surgery are (1) inability to achieve vascular control by more conventional means, (2) massive distention of regional veins as occurrs in well established fistulas of the trunk, (3) one or more prior corrective attempts with use of conventional techniques, and (4) anticipated anatomical distortion and/or multiple abnormal vascular communications. This technique is a valuable approach to the correction of otherwise inoperable cardiovascular lesions.     

Effect of vegetarian diets on zinc status: a systematic review and meta‐analysis of studies in humans

Plant‐based diets contain less saturated fat and cholesterol and more folate, fibre and phytochemicals than omnivorous diets, but some micronutrients, especially zinc, are poorly bioavailable. The findings of studies exploring the zinc intake and zinc status in populations that habitually consume vegetarian diets are inconsistent. This study aims to investigate the effects of plant‐based diets on dietary zinc intake and status in humans using systematic review and meta‐analysis techniques. Thirty‐four studies were included in the systematic review. Of these, 26 studies (reporting 48 comparisons) compared males and/or females consuming vegetarian diets with non‐vegetarian groups and were included in meta‐analyses. Dietary zinc intakes and serum zinc concentrations were significantly lower (?0.88 ± 0.15 mg day^?1, P < 0.001 and ?0.93 ± 0.27 µmol L^?1, P = 0.001 respectively; mean ± standard error) in populations that followed habitual vegetarian diets compared with non‐vegetarians. Secondary analyses showed greater impact of vegetarian diets on the zinc intake and status of females, vegetarians from developing countries and vegans. Populations that habitually consume vegetarian diets have low zinc intakes and status. Not all vegetarian categories impact zinc status to the same extent, but a lack of consistency in defining vegetarian diets for research purposes makes dietary assessment difficult. Dietary practices that increase zinc bioavailability, the consumption of foods fortified with zinc or low‐dose supplementation are strategies that should be considered for improving the zinc status of vegetarians with low zinc intakes or serum zinc concentrations at the lower end of the reference range. © 2013 Society of Chemical Industry     

Role of endoproteolytic dibasic proprotein processing in maturation of secretory proteins in Trichoderma reesei

Cell extracts of Trichoderma reesei exhibited dibasic endopeptidase activity toward the carboxylic side of KR, RR, and PR sequences. This activity was stimulated by the presence of Ca2+ ions and localized in vesicles of low bouyant density; it therefore exhibited some similarity to yeast Kex2. Analytical chromatofocusing revealed a single peak of activity. The dibasic endopeptidase activity was strongly and irreversibly inhibited in vitro as well as in vivo by 1 mM p-amidinophenylmethylsulfonyl fluoride (pAPMSF) but not by PMSF at concentrations up to 5 mM. We therefore used pAPMSF to study the role of the dibasic endopeptidase in the secretion of protein by T. reesei. Secretion of xylanase I (proprotein processing sequence -R-R- downward arrow-R- downward arrow-A-) and xylanase II (-K-R- downward arrow-Q-) was strongly inhibited by 1 mM pAPMSF, and a larger, unprocessed enzyme form was detected intracellularly under these conditions. Secretion of cellobiohydrolase II (CBH II; -E-R- downward arrow-Q-) was only slightly inhibited by pAPMSF, and no accumulation of unprocessed precursors was detected. In contrast, secretion of CBH I (-R-A- downward arrow-Q-) was stimulated by pAPMSF addition, and a simultaneous decrease in the concentration of intracellular CBH I was detected. Similar experiments were also carried out with a single heterologous protein, ShBLE, the phleomycin-binding protein from Streptoalloteichus hindustanus, fused to a series of model proprotein-processing sequences downstream of the expression signals of the Aspergillus nidulans gpdA promoter. Consistent with the results obtained with homologous proteins, pAPMSF inhibited the secretion of ShBLE with fusions containing dibasic (RK and KR) target sequences, but it even stimulated secretion in fusions to LR, NHA, and EHA target sequences. Addition of 5 mM PMSF, a nonspecific inhibitor of serine protease, nonspecifically inhibited the secretion of heterologous proteins from fusions bearing the NHA and LR targets. These data point to the existence of different endoproteolytic proprotein processing enzymes in T. reesei and demonstrate that dibasic processing is obligatory for the secretion of the proproteins containing this target.     

Acute blindness after severe quinine poisoning

This article was prepared and submitted to members of the TMD academic community for their endorsement. A total of 120 people signed an endorsement; their names are available on request.