A thin PANI and carrageenan–gold nanoparticle film on a flexible gold electrode as a conductive and low-cost platform for sensing in a physiological environment

In this work, we report the production of a layer-by-layer (LbL) film of gold nanoparticles stabilized with carrageenan (carr-AuNPs) interspersed with a conductive polyaniline (PANI) layer. Conventionally, PANI has poor electroactivity in physiological buffers, limiting its using in electrochemical biosensors. The films were prepared on low cost and easy to manufacture flexible gold electrodes (FEAu). Two adsorption sequences were tested for production of the films—PANI/carr-AuNP and carr-AuNP/PANI. The gold nanoparticle size and colloidal stability were characterized. The films were characterized by cyclic voltammetry, UV–visible spectroscopy and atomic force microscopy. The results showed the synergistic effects of the carr-AuNPs (120 nm) and PANI, which improved both the electrochemical response and the stability of the conductive polymer in physiological medium by three times. The presence of the carr-AuNPs in the film caused a significant increase in roughness of the FEAu-modified electrode compared to that of an unmodified electrode, resulting in an increased active electrode area. Studies of film growth by UV–Vis spectroscopy indicated that the deposition mechanisms of both films involved an auto-regulating adsorption process, with the same amount of material adsorbed in each coating step. The PANI/carr-AUNP film showed considerable improvement in stability and conductivity compared to PANI-only films in the physiological environment, which confers advantages for use as a biosensor.     

A multi-objective approach for multi-material topology and shape optimization

An automated multi-material approach that integrates multi-objective Topology Optimization (TO) and multi-objective shape optimization is presented. A new ant colony optimization algorithm is presented and applied to solving the TO problem, estimating a trade-off set of initial topologies or distributions of material. The solutions found usually present irregular boundaries, which are not desirable in applications. Thus, shape parameterization of the internal boundaries of the design region, and subsequent shape optimization, is performed to improve the quality of the estimated Pareto-optimal solutions. The selection of solutions for shape optimization is done by using the PROMETHEE II decision-making method. The parameterization process involves identifying the boundaries of different materials and describing these boundaries by non-uniform rational B-spline curves. The proposed approach is applied to the optimization of a C-core magnetic actuator, with two objectives: the maximization of the attractive force on the armature and the minimization of the volume of permanent magnet material.     

Robust additive watermarking in the DTCWT domain based on perceptual masking

Multimedia Tools and Applications - In this paper, a robust additive image watermarking system operating in the Dual Tree Complex Wavelet Transform (DTCWT) domain is proposed. The system takes...     

Biologically active polymers. IV. Synthesis and antimicrobial activity of tartaric acid polyamides

New bactericidal polyamides with quaternary ammonium or phosphonium salts were prepared, and their antimicrobial activities were explored. The polyamides were synthesized by the polycondensation of diethyl‐l‐tartrate or chloromethylated diethyl‐l‐tartrate with ethylenediamine in dry absolute ethanol. The polyamides were modified to yield polymers with either quaternary ammonium or phosphonium salts. The polymers were characterized with elemental microanalysis and ¹H‐NMR and IR spectra. The antimicrobial activity of the polymers bearing onium salts was studied against Gram‐negative bacteria (Escherichia coli, Pseudomones aeruginosa, Shigella sp., and Salmonella typhae), Gram‐positive bacteria (Bacillus subtilis and Bacillus cereus), and a fungus (Trichophytum rubrum) by the cut‐plug and viable‐cell‐count methods. Although all the polymers showed high antibacterial activity, some had no antifungal activity. The tributyl phosphonium salt of the polyamide was more effective against both Gram‐negative and Gram‐positive bacteria than the triethyl ammonium and triphenyl phosphonium salts of the polyamide. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4780–4790, 2006     

Magnetic polystyrene–palygorskite nanocomposite obtained by heterogeneous phase polymerization to apply in the treatment of oily waters

Water contaminated by oil poses challenges to the management of water resources. Magnetic nanoparticles has been issue of different potential applications including remotion oil from water. Magnetic polystyrene–palygorskite nanocomposites were prepared by a heterogeneous phase polymerization for the removal of organic contaminants from water. The organo‐Fe₃O₄‐palygorskite nanoparticles were coated with polystyrene, forming water repellent and oil absorbing surfaces to promote the removal of oil from the surfaces of nanocomposites by applying an external magnetic field. X‐ray fluorescence, X‐ray diffraction, scanning electron microscopy, zeta potential and size distribution measurement, surface area determination by BET, density measurement by He pycnometry, carbon grade determination, thermogravimetric analysis, Fourier‐transform infrared spectroscopy, Raman spectroscopy, and evaluation of hydrophobicity by contact angle were used to characterize the nanoparticles. The magnetic nanocomposite obtained showed excellent hydrophobicity, around 78° contact angle. In addition, oil removal capability tests were also performed, according to which the preliminary results indicated removal of approximately 98% of oil in synthetic oily water samples. The oil–water separation using this magnetic nanocomposite provides a promising alternative strategy for water treatment. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46162.     

Spectroscopic,electrical, and relaxor‐like properties of cellulose acetate–erbium (III) chloride composite films

Cellulose acetate thin films doped with erbium (III) chloride (ErCl₃) of different concentrations were prepared by the solution method. The prepared composite films were characterized using scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and thermogravimetric analysis. IR spectral analysis, UV–visible absorption, a.c. conductivity, and dielectric properties were investigated. The studied ErCl₃‐doped samples showed different properties from those of their pure components. SEM micrographs showed that for small dopant concentrations, samples tend to form conducting nanostructures with negligible particle agglomeration. DSC showed a monotonic development of the glass transition temperature by increasing the concentration of dopant material. Variation in the height, shape, and position of the bands in infrared transmission spectra, as well as the glass transition temperatures, indicated a complex interaction with the polymer molecular chains. Thermal stability and thermodynamic parameters were found to be concentration dependent. The electronic transitions’ band gabs and energy tails were calculated from the optical data. The dielectric studies showed that the correlated barrier hopping model was the dominant mechanism of a.c. conductivity. We found that samples with 10% and 20% ErCl₃ exhibited high dielectric constants and have pronounced electrostriction and relaxor‐like properties. Such samples can be used in many applications like electromechanical and thermomechanical transducers. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45220.     

Development of phase morphology in immiscible poly(styrene‐co‐acrylonitrile)/poly(butylene terephthalate) nanoblends: Mechanical properties and effect of the compatibilizer

Nanoblends were obtained from poly(styrene‐co‐acrylonitrile) (SAN) as a matrix, and poly(butylene terephthalate) (PBT) was used as a nanodispersed phase. Compatibilized SAN/PBT blends were prepared by reactive extrusion, and the PBT concentrations ranged between 3 and 30 wt %. Nanoblends were obtained for up to 10 wt % PBT concentrations in the presence of the compatibilizer. With 20 and 30 wt % PBT, the extruded material presented a droplet dispersed phase. The same blends were subjected to an injection‐molding process, which provided a cocontinuous phase morphology. The influence of the concentration of the dispersed phase and the type of morphology on the mechanical behavior of tensile test, flexural test, impact test, and deflection temperature of the blends was analyzed. The results show an important reduction in the particle size of the dispersed phase, which was due to the presence of the compatibilizer. Furthermore, the type of morphology and an excess of compatibilizer exerted a stronger influence on the mechanical properties than the particle size of the dispersed phase. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45030.