In situ regeneration of the Ni-based catalytic reformer of a 5 kW PEMFC system

The paper reports the results of on-site regeneration catalytic bed of the natural gas reformer in a 5 kW PEM fuel cell system. The Ni catalyst previously poisoned by sulphur from the available natural gas, could be re-activated by injection of pure water steam, following the method developed for industrial reformers using the same metal catalyst: this method was shown to be perfectly efficient, provided no natural gas was fed during the operation. Results of the tests conducted are presented and discussed in relation to published data on S-sorption on Ni surfaces.     

Characterisation and modelling of a 5 kW PEMFC for transportation applications

In the framework of the French inter lab SPACT project (fuel cell systems for transportation applications), a 10 kW PEM fuel cell testing bench has been installed in 2002 in the national fuel cell test platform located in Belfort, France. The behaviour of a 5 kW fuel cell, fed with humidified pure hydrogen gas and compressed air, has been investigated by the Laboratory of Electrical Engineering and Systems (L2ES) in association with the French National Institute for Transport and Safety Research (INRETS).     

Incidence of different pork quality categories in a Portuguese slaughterhouse: A survey

This study was designed to evaluate the incidence of the PSE/DFD status in a Portuguese pig slaughterhouse, covering two seasons of the year (spring and summer) in order to find out if the proportions of those poor meat quality categories were sufficient to concern the meat industry. Meat quality classification was based on the measurements of the pH(60), pH(24), drip losses and colour (L, a, b) in the longissimus dorsi muscle (between the last third and fourth ribs) of 380 pigs randomly chosen from the line. The high global incidence of PSE and likely PSE (30%) as well as DFD (10%) carcasses and the enormous variation of the meat quality between the different days of analysis proves that the pig population presents a great variation of halothane genotype and that handling procedures have to be optimized in order to decrease stress and glycogen store depletion. The percentage of PSE carcasses during the summer season was double that found in the spring, probably due to a higher environmental temperature and relative humidity.     

Silicon‐Modified Rare‐Earth Transitions—A New Route to Near‐ and Mid‐IR Photonics

Silicon underpins microelectronics but lacks the photonic capability needed for next‐generation systems and currently relies on a highly undesirable hybridization of separate discrete devices using direct band gap semiconductors. Rare‐earth (RE) implantation is a promising approach to bestow photonic capability to silicon but is limited to internal RE transition wavelengths. Reported here is the first observation of direct optical transitions from the silicon band edge to internal f‐levels of implanted REs (Ce, Eu, and Yb); this overturns previously held assumptions about the alignment of RE levels to the silicon band gap. The photoluminescence lines are massively redshifted to several technologically useful wavelengths and modeling of their splitting indicates that they must originate from the REs. Eu‐implanted silicon devices display a greatly enhanced electroluminescence efficiency of 8%. Also observed is the first crystal field splitting in Ce luminescence. Mid‐IR silicon photodetectors with specific detectivities comparable to existing state‐of‐the‐art mid‐IR detectors are demonstrated.     

System integration of high voltage electrostatic MEMS actuators

A system integration for High Voltage (HV) electrostatic MicroElectroMechanical Systems (MEMS) actuators is introduced on a micro-Printed Circuit Board. The system includes a programmable microcontroller, a programmable DC/DC converter, a multi output HV interface and electrostatic MEMS actuators. The system produces high output voltages (10–300 V) and can control a large variety of MEMS capacitive loads (1 to 50 pF) by combining diverse semiconductor technologies. This system proves that technologies, such as low voltage CMOS of different processes, high voltage DMOS and MEMS, can interact, communicate and even be integrated as a System In Package (SIP), providing significant size and cost reductions. The system was programmed to control electrostatic MEMS actuator. The DC/DC converter was made from components of different technologies and two addressable high voltage CMOS interfaces were fabricated with DALSA's 0.8 μm High Voltage process. A prototype of the global system has been built and tested.     

Paraxial approximation effect on a dielectric interface analysis

We are presenting a fast new method of analysing a dielectric interface which is assumed to be cylindrically symmetrical. It is based on a multimode Gaussian beam development. Then two different cases are considered and we show the kind of results we can expect from this process. Finally, we explain in detail the relationships between the paraxial approximation and further justified simplifications which lead to an important calculation time decrease.     

Effect of additives on the degradation of acrylamide–acrylic acid copolymer in aqueous solution

This paper presents the results of a systematic study of the effect of different additives on the degradation of acrylamide–acrylic acid copolymers at high temperature. Under conditions of current applications in enhanced oil recovery (without oxygen and in the presence of ferrous ions), the effects of sodium azide, sequestrant DTPA, and isobutanol have been separately tested. It is shown that DTPA enhances degradation when ferrous ions are present. A new process of stabilization which may be efficient in most of the conditions is proposed.