Effect of high temperature annealing on scratch behavior of acrylonitrile styrene acrylate copolymers

The scratch behavior of butyl-acrylate rubber-modified styrene-acrylonitrile (ASA) upon high temperature annealing is investigated following the ASTM D7027/ISO 19252 linearly increasing normal load test methodology. The critical normal loads at the onset of the major deformation transitions along the scratch path, such as groove formation, scratch visibility, microcrack formation, and plowing, are reported and quantitatively analyzed. It is found that the scratch resistance improves with high temperature annealing, i.e., 30 °C above T_g, as compared to annealing below or around T_g. Microscopic investigation suggests that the increase in scratch resistance is related to the changes in surface morphology of the polymer. It is concluded that performing high temperature annealing enhances the scratch performance without compromising ASA bulk properties. Implication of the present study for improving scratch resistance of polymers is discussed.     

Phase development and pore stability of yttria- and ytterbia-stabilized zirconia aerogels

High-porosity yttria- and ytterbia-stabilized zirconia aerogels offer the potential of extremely low thermal conductivity materials for high-temperature applications. Yttria- and ytterbia-doped zirconia aerogels were synthesized using a sol-gel approach over the dopant range of 0-20 atomic percent. Surface area, pore volume, and morphology of the as-dried aerogels and materials thermally exposed for short periods of time to temperatures up to 1200°C were characterized by nitrogen physisorption, scanning and transmission electron microscopy, and X-ray diffraction. The aerogels as supercritically dried all were X-ray amorphous. At a 5% dopant level, a tetragonal structure with a smaller monoclinic phase developed on thermal exposure. Mixed tetragonal and cubic phases or predominantly cubic materials were observed at higher dopant levels, depending on the dopant level, temperature and exposure time. The formation of crystalline phases was accompanied by loss of surface area and pore volume, although some mesoporous structure was maintained on short-term exposure to 1000°C. Incorporation of the smaller Yb atom into the lattice structure resulted in smaller lattice dimensions on crystallization than was seen with Y doping and favored a more highly equiaxed structure. Aerogels synthesized with 15% Y maintained the smallest particle size without evidence of sintering at 1100°C. Largest shrinkage and loss of pore volume occurred on crystallization from the amorphous phase, with further loss of pores at temperatures above 1000°C attributable to changes in lattice parameters.     

Tethered drug release from model contact lenses

Drug delivery to the eye remains a challenge due to low compliance and high amounts of drug loss resulting from anatomical barriers. Contact lens-based delivery systems offer many advantages since their increased corneal residence time can increase drug bioavailability. A releasable, sustained delivery system from a contact lens has been evaluated in the current work. Using a labile lactide spacer, comprised of poly(ethylene glycol) methacrylate, varying numbers of lactide units and succinic anhydride, a model drug, R-roscovitine, was covalently incorporated into model silicone lenses (consisting of 80 mol% N,N-dimethylacrylamide and 20 mol% of a modified silicone). This enabled a greater amount of the drug to remain in the material following extraction with isopropyl alcohol, a common purification procedure used in lens manufacturing. The incorporation of the tether and drug did not substantially alter the bulk properties of the materials, with their water content remaining between 32% and 36% and their transmittance remaining at over 90% at 600 nm. Drug release from these materials exceeded 2 weeks, with the longer lactide tethers showing greater release as expected. This demonstrates that these covalently modified materials have the potential to be used to deliver drugs in a sustained manner. © 2022 Society of Industrial Chemistry.     

High-performance liquid chromatography of human milk triacylglycerols and gas chromatography of component fatty acids

Human milk triacylglycerols were separated by high-performance liquid chromatography. A 5-μ Supelcosil LC-18 column (Supelco, Inc., Bellefonte, PA) was used with acetone/acetonitrile (64∶36, vol/vol) as mobile phase. Triacylglycerols were tentatively identified based on theoretical carbon number and relative retention time. Despite changes resulting from dietary fat variation, the major component triacylglycerols were those composed of palmitic, oleic and linoleic acids. Triacylglycerols with palmitic, stearic and oleic acids were present as minor components. Fatty acids were quantified by gas chromatography relative to an internal standard. Ratios of n−6/n−3 fatty acids were found to be high than previously reported. Based on a paper presented at the Symposium on Milk Lipids held at the AOCS Annual Meeting, Baltimore, MD, April 1990.     

Surface chemistry and mechanical property changes of wood‐flour/high‐density‐polyethylene composites after accelerated weathering

Although wood–plastic composites have become more accepted and used in recent years and are promoted as low‐maintenance, high‐durability building products, they do experience a color change and a loss in mechanical properties with accelerated weathering. In this study, we attempted to characterize the modulus‐of‐elasticity (MOE) loss of photostabilized high‐density polyethylene (HDPE) and composites of wood flour and high‐density polyethylene (WF/HDPE) with accelerated weathering. We then examined how weathering changed the surface chemistry of the composites and looked at whether or not the surface changes were related to the MOE loss. By examining surface chemistry changes, we hoped to begin to understand what caused the weathering changes. The materials were left unstabilized or were stabilized with either an ultraviolet absorber or pigment. After 1000 and 2000 h of accelerated weathering, the samples were tested for MOE loss. Fourier transform infrared (FTIR) spectroscopy was employed to monitor carbonyl and vinyl group formation at the surface. Changes in the HDPE crystallinity were also determined with FTIR techniques. It was determined that structural changes in the samples (carbonyl group formation, terminal vinyl group formation, and crystallinity changes) could not be reliably used to predict changes in MOE with a simple linear relationship. This indicated that the effects of crosslinking, chain scission, and crystallinity changes due to ultraviolet exposure and interfacial degradation due to moisture exposure were interrelated factors for the weathering of HDPE and WF/HDPE composites. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2263–2273, 2004     

Development of novel 1,2,3,4-tetrahydroisoquinoline derivatives and closely related compounds as potent and selective dopamine D3 receptor ligands

Based on N-alkylated 1,2,3,4-tetrahydroisoquinoline derivatives, which are structurally related to the partial agonist BP 897, a series of novel, selective dopamine D3 receptor antagonists has been synthesised. Derivatisation included changes in the arylamide moiety and the tetrahydroisoquinoline substructure leading to compounds with markedly improved selectivities and affinities in the low nanomolar concentration range. From the 55 structures presented here, (E)-3-(4-iodophenyl)-N-(4-(1,2,3,4-tetrahydroisoquinolin-2-yl)butyl)acrylamide (51) has high affinity (Ki(hD3)=12 nM) and a 123-fold preference for the D3 receptor relative to the D2 receptor subtype. Its pharmacological profile offers the prospect of a novel radioligand as a tool for various dopamine D3-receptor-related in vitro and in vivo investigations.     

Expression and stabilization of galactose oxidase in Escherichia coli by directed evolution

We have used directed evolution methods to express a fungalenzyme, galactose oxidase (GOase), in functional form in Escherichiacoli. The evolved enzymes retain the activity and substratespecificity of the native fungal oxidase, but are more thermostable,are expressed at a much higher level (up to 10.8 mg/l of purifiedGOase), and have reduced negative charge compared to wild type,all properties which are expected to facilitate applicationsand further evolution of the enzyme. Spectroscopic characterizationof the recombinant enzymes reveals a tyrosyl radical of comparablestability to the native GOase from Fusarium.     

Field intercomparison of the gas/particle partitioning of oxygenated organics during the Southern Oxidant and Aerosol Study (SOAS) in 2013

We present results of the first intercomparison of real-time instruments for gas/particle partitioning of organic species. Four recently-developed instruments that directly measure gas/particle partitioning in near-real time were deployed in Centreville, Alabama during the Southern Oxidant Aerosol Study (SOAS) in 2013. Two instruments were filter inlet for gases and aerosols high-resolution chemical ionization mass spectrometers (FIGAERO-HRToF-CIMS) with acetate (A-CIMS) and iodide (I-CIMS) ionization sources, respectively; the third was a semi-volatile thermal desorption aerosol GC-MS (SV-TAG); and the fourth was a high-resolution thermal desorption proton-transfer reaction mass spectrometer (HR-TD-PTRMS). Signals from these instruments corresponding to several organic acids were chosen for comparison. The campaign average partitioning fractions show good correlation. A similar level of agreement with partitioning theory is observed. Thus the intercomparison exercise shows promise for these new measurements, as well as some confidence on the measurement of low versus high particle-phase fractions. However, detailed comparison show several systematic differences that lie beyond estimated measurement errors. These differences may be due to at least eight different effects: (1) underestimation of uncertainties under low signal-to-noise; (2) inlet and/or instrument adsorption/desorption of gases; (3) differences in particle size ranges sampled; (4) differences in the methods used to quantify instrument backgrounds; (5) errors in high-resolution fitting of overlapping ion groups; (6) differences in the species included in each measurement due to different instrument sensitivities; and differences in (7) negative or (8) positive thermal decomposition (or ion fragmentation) artifacts. The available data are insufficient to conclusively identify the reasons, but evidence from these instruments and available data from an ion mobility spectrometer shows the particular importance of effects 6–8 in several cases. This comparison highlights the difficulty of this measurement and its interpretation in a complex ambient environment, and the need for further improvements in measurement methodologies, including isomer separation, and detailed study of the possible factors leading to the observed differences. Further intercomparisons under controlled laboratory and field conditions are strongly recommended.

Copyright © 2017 American Association for Aerosol Research     

Sex- and Genotype-Dependent Nicotine-Induced Behaviors in Adolescent Rats with a Human Polymorphism (rs2304297) in the 3′-UTR of the CHRNA6 Gene

In human adolescents, a single nucleotide polymorphism (SNP), rs2304297, in the 3′-UTR of the nicotinic receptor subunit gene, CHRNA6, has been associated with increased smoking. To study the effects of the human CHRNA6 3′-UTR SNP, our lab generated knock-in rodent lines with either C or G SNP alleles. The objective of this study was to determine if the CHRNA6 3′-UTR SNP is functional in the knock-in rat lines. We hypothesized that the human CHRNA6 3′-UTR SNP knock-in does not impact baseline but enhances nicotine-induced behaviors. For baseline behaviors, rats underwent food self-administration at escalating schedules of reinforcement followed by a locomotor assay and a series of anxiety tests (postnatal day (PN) 25-39). In separate cohorts, adolescent rats underwent 1- or 4-day nicotine pretreatment (2×, 30 μg/kg/0.1 mL, i.v.). After the last nicotine injection (PN 31), animals were assessed behaviorally in an open-field chamber, and brain tissue was collected. We show the human CHRNA6 3′-UTR SNP knock-in does not affect food reinforcement, locomotor activity, or anxiety. Further, 4-day, but not 1-day, nicotine exposure enhances locomotion and anxiolytic behavior in a genotype- and sex-specific manner. These findings demonstrate that the human CHRNA6 3′-UTR SNP is functional in our in vivo model.     

Turbine airfoil degradation in the persian gulf war

Helicopter turbine engines used in the Desert Shield and Desert Storm operations experienced excessive sand ingestion. Fine particles were able to bypass filters and proceed through the combustor or cooling gaspaths. The first-stage turbine vanes were impacted with viscous silicate particles, forming a deposit on the leading-edge root platform and resulting in overheating and oxidation. The chemistry of the raw sand determines that of the ingested powders, the deposits, and the material reactions.