A numerical photogrammetry technique for measuring microscale kinematics and fabric in Schneebeli materials

We present a numerical photogrammetry technique for obtaining semi–automated measurements concerning kinematic fields, i.e. translation and rotation of each “grain”, and fabric properties of a two-dimensional analogue granular material. An example is given in which the technique is applied in a biaxial compression test on a specimen consisting of 1,300 rods. The information that can be recorded by the technique is discussed along with its accuracy. This work is funded by the EU project Degradation and Instabilities in Geomaterials with Application to Hazard Mitigation (DIGA) in the framework of the Human Potential Program, Research Training Networks (HPRN-CT-2002-00220).     

Spread-Spectrum Code Acquisition in the Presence of Cell Correlation

A new special function, called the modified generalized Q (MGQ) function, is here defined to analytically express the performance of the pseudonoise code acquisition based on matched filter correlators. In the considered case of two cells per chip, no convergent infinite series have been found in the open literature expressing the probabilities of false alarm and detection. The performance is analyzed in terms of mean acquisition time for signal-to-noise ratios of practical interest     

Simulation and experimental results on the forward J–V characteristic of Al implanted 4H–SiC p–i–n diodes

In this work the forward J–V characteristics of 4H–SiC p–i–n diodes are analysed by means of a physics based device simulator tuned by comparison to experimental results. The circular devices have a diameter of 350 μm. The implanted anode region showed a plateau aluminium concentration of 6×10¹⁹ cm⁻³ located at the surface with a profile edge located at 0.2 μm and a profile tail crossing the n-type epilayer doping at 1.35 μm. Al atom ionization efficiency was carefully taken into account during the simulations. The final devices showed good rectifying properties and at room temperature a diode current density close to 370 A/cm² could be measured at 5 V. The simulation results were in good agreement with the experimental data taken at temperatures up to about 523 K in the whole explored current range extending over nine orders of magnitude. Simulations also allowed to estimate the effect of a different p⁺ doping electrically effective profile on the device current handling capabilities.     

An Optimization Approach to Petri Net Monitor Design

This note addresses the problem of enforcing generalized mutual exclusion constraints on a Petri net plant. First, we replace the classical partition of the event set into controllable and uncontrollable events from supervisory control theory, by associating a control and observation cost to each event. This leads naturally to formulate the supervisory control problem as an optimal control problem. Monitor places which enforce the constraint are devised as a solution of an integer linear programming problem whose objective function is expressed in terms of the introduced costs. Second, we consider timed models for which the monitor choice may lead to performance optimization. If the plant net belongs to the class of mono-T-semiflow nets, we present an integer linear fractional programming approach to synthesize the optimal monitor so as to minimize the cycle time lower bound of the closed loop net. For strongly connected marked graphs the cycle time of the closed-loop net can be minimized     

Comparative chemical composition,antioxidant and hypoglycaemic activities of Juniperus oxycedrus ssp. oxycedrus L. berry and wood oils from Lebanon

Juniper (Juniperus oxycedrus) is used in European cuisine for its distinguishing flavour. J. oxycedrus ssp. oxycedrus berry and wood essential oils were tentatively identified by GC and GC/MS. Fifty compounds were identified in the berry oil and 23 compounds were identified in the wood oil. The J. oxycedrus ssp. oxycedrus berry oil was characterised by high contents of α-pinene (27.4%) and β-myrcene (18.9%). Other important compounds were α-phellandrene (7.1%), limonene (6.7%), epi-bicyclosesquiphellandrene (2.3%) and δ-cadinene (2.2%) while, in the wood oil, δ-cadinene (14.5%) is a major main component, together with cis-thujopsene (9.2%) and α-muurolene (4.9%). In vitro evaluation of antioxidant activity by the DPPH method showed a significant activity for both oils with IC₅₀ values of 1.45 μl/ml for wood and 7.42 μl/ml for berries. Hypoglycaemic activity was investigated through the inhibition of α-amylase. The results revealed that oil obtained by hydrodistillation from J. oxycedrus ssp. oxycedrus wood exhibits an interesting activity with IC₅₀ of 3.49 μl/ml.     

An investigation of the potential for natural ventilation and building orientation to achieve thermal comfort in warm and humid climates

The aim of this study was to analyze the most important factor, the climatic conditions with respect to thermal comfort in buildings. The impact of building location and climate and orientation on thermal comfort were investigated.With the help of dynamic computer simulations the different hourly weather data were analyzed. First of all the climate determines the amount of solar radiation and mean outside temperature that a building is exposed to. The climate also influences the amount of energy that is used for heating and cooling but also the amount of energy that is used for lighting. There is solar excess which determines the amount of solar energy that is unwanted in the building. With growing amounts of glass and a glazing system that allows large solar heat gains,the impact of orientation is substantial. A detailed analysis was conducted to evaluate the potentials for improving thermal comfort. Detailed results are given in sample graphics and tables in the study. In a tropical climate the improvement in comfort by NV range between 9% and 41% (Kuala Lumpur in April). For a subtropical climate the improvements vary between 3% and 14%. In a temperate climate the improvements vary between 8% and 56%. The results showed that NV has a good potential in tropical and temperate climates but not in subtropical climates. Especially in Hong Kong it seems to be very difficult to apply NV. The results showed that in particular in the hottest period (summer) the potential for comfort improvements is rather small. The design of climate responsive building envelopes should take this into consideration.     

Experimental characterization and numerical analysis of the 4H-SiC p-i-n diodes static and transient behaviour

Steady-state and turn-off switching characteristics of aluminium-implanted 4H-SiC p-i-n diodes designed for high-current density operation, are investigated experimentally and by mean of numerical simulations in the 298-523 K temperature range. The diodes present circular structure with a diameter of 350 μm and employ an anode region with an aluminium depth profile peaking at 6×10¹⁹ cm⁻³ at the surface. The profile edge and the junction depth are located at 0.2 and 1.35 μm, respectively. At room temperature the measured forward current density is close to 370 A/cm² at 5 V with an ideality factor always less than 2 before high-current injection or device-series resistance became dominant. The transient analysis reveals a strong potential of this diodes for use in high-speed, high-power applications, especially at high temperature, with a very low turn-off recovery time (<80 ns) in the whole range of test conditions. The simulated results match the experimental data, showing that the switching performance is mainly due to the poor minority charge carrier lifetime estimated to be 15 ns for these implanted devices.     

Protein content and gluten quality of durum wheat (Triticum turgidum subsp. durum) as affected by sowing date

The end use quality of durum wheat is sensitive to the environmental conditions pertaining before and during grain filling, and can therefore be modified by manipulation of cultivar and sowing date. A field trial was carried out to study the effect on protein content and gluten quality of varying both sowing date (October, December and March) and cultivar (Simeto, Colosseo and Creso). A delay in sowing date was associated with a decrease in mean grain weight, but not in grain nitrogen content, thus leading to an overall increase from 10.7 to 14.7% in grain protein percentage. Independent of sowing date, over 78% of the grain nitrogen was derived from re‐translocation from vegetative tissue. The similar amounts of nitrogen accumulated in each grain at maturity were set by the similarity in the amount of nitrogen available at anthesis. The observed increase in protein percentage partly explained the greater dough strength (alveographic W) observed in material harvested from the latest sowing. The gluten index, on the other hand, decreased as sowing was delayed. Given the parallel increase in glutenin percentage, we propose that temperatures above 30 °C at the end of the grain filling period have a negative effect on the gluten polymerisation process. Copyright © 2007 Society of Chemical Industry     

Modelling the relationship between tensile strength and porosity in bioceramic scaffolds

A model describing the relationship between tensile strength and total porosity in brittle open-cell macroporous foams is developed and applied to silicate ceramic scaffolds produced by sponge replication and subsequent sinter-crystallization. The tensile strength of the scaffolds decreased from 7.4 to 2.3 MPa as the total porosity increased from 0.40 to 0.79. The results of the model, which is based on the concepts of fracture mechanics, were in good agreement with the experimental data (R² = 0.88), which supports the good predictive capability of the approach presented. In principle, this model could help biomaterials scientists not only to estimate the tensile strength of highly-porous bioactive glass and ceramic scaffolds, which is often difficult to determine experimentally, but also to improve the rational design of porous bioceramics with customized properties.