Contact effects in organic thin-film transistor sensors

Contact effects in organic thin-film transistors (OTFTs) sensors are here investigated specifically respect to the gate field-induced sensitivity enhancement of more than three orders of magnitude seen in a DHα6T OTFT sensor exposed to 1-butanol vapors. This study shows that such a sensitivity enhancement effect is largely ascribable to changes occurring to the transistor channel resistance. Effects, such as the changes in contact resistance, are seen to influence the low gate voltage regime where the sensitivity is much lower.     

Resilient BBU placement in 5G C-RAN over optical aggregation networks

Photonic Network Communications - The huge data demand envisioned for the 5G requires radical changes in the mobile network architecture and technology. Centralized radio access network (C-RAN) is...     

Effect of lithium intercalation on the photovoltaic performances of photovoltachromic cells

In the last few years, a new class of smart multifunctional photoelectrochemical devices has been attracting the interest of several academic institutions and industrial companies: photovoltachromic cells, combining the features of photoelectrochromic cells with those of dye‐sensitized solar cells. Here, we report the results of a detailed electrochemical analysis aiming at investigating the electrochemical behavior of these complex photoelectrochemical devices. In particular, we have been focused on the effect of Li⁺ ions displacement during the coloration of the electrochromic tungsten oxide on the performances of the photovoltaic unit. As we had previously observed striking differences between the performances of the barely photovoltaic mode (with the tungsten oxide in the bleached state) and the photovoltachromic mode (with the tungsten oxide in the colored state), we thus attempted to provide a reasonable physical interpretation to the observed phenomena. Copyright © 2013 John Wiley & Sons, Ltd.     

A 2D Full-Band Monte Carlo Study of HgCdTe-Based Avalanche Photodiodes

This work presents a numerical simulation study of HgCdTe-based avalanche photodetectors (APDs). The two-dimensional model used is based on a full-band Monte Carlo approach in which the electronic structure is computed using a nonlocal empirical pseudopotential model with spin–orbit corrections. The carrier–phonon scattering rates have been computed from first principles using a rigid pseudo-ion model. The most attractive feature of these devices is the potential for single-carrier ionization when electrons are used as the primary injection carrier. For this reason, this work focuses on two front-illuminated (electron-injection) device structures: a planar diffused PIN structure and a planar diffused PN photodiode with guard rings. To predict the performance of these APDs, the electron multiplication gain has been studied as a function of the position where photogenerated carriers are injected and as a function of the curvature of the p-type diffusion region. We find that, in the diffused PIN structure, the limited lateral spatial extent of the high-electric-field region leads to a reduction of the multiplication gain from the center of the device to the periphery. Furthermore, the higher the curvature, the more abruptly the gain decreases. For the simple PN structure, we find that the presence of the guard rings removes the high electric field from the surface and induces a more gradual roll-off of the gain from the center of the device to the periphery.     

Rayleigh mixture model for plaque characterization in intravascular ultrasound

Vulnerable plaques are the major cause of carotid and coronary vascular problems, such as heart attack or stroke. A correct modeling of plaque echomorphology and composition can help the identification of such lesions. The Rayleigh distribution is widely used to describe (nearly) homogeneous areas in ultrasound images. Since plaques may contain tissues with heterogeneous regions, more complex distributions depending on multiple parameters are usually needed, such as Rice, K or Nakagami distributions. In such cases, the problem formulation becomes more complex, and the optimization procedure to estimate the plaque echomorphology is more difficult. Here, we propose to model the tissue echomorphology by means of a mixture of Rayleigh distributions, known as the Rayleigh mixture model (RMM). The problem formulation is still simple, but its ability to describe complex textural patterns is very powerful. In this paper, we present a method for the automatic estimation of the RMM mixture parameters by means of the expectation maximization algorithm, which aims at characterizing tissue echomorphology in ultrasound (US). The performance of the proposed model is evaluated with a database of in vitro intravascular US cases. We show that the mixture coefficients and Rayleigh parameters explicitly derived from the mixture model are able to accurately describe different plaque types and to significantly improve the characterization performance of an already existing methodology.     

Self‐Assembled Conjugated Thiophene‐Based Rotaxane Architectures: Structural,Computational, and Spectroscopic Insights into Molecular Aggregation

A comparative study of the self‐assembly at a variety of surfaces of a dithiophene rotaxane 1 ?β‐CD and its corresponding dumbbell, 1, by means of atomic force microscopy (AFM) imaging and scanning tunneling microscopy (STM) imaging on the micrometer and nanometer scale, respectively. The dumbbell is found to have a greater propensity to form ordered supramolecular assemblies, as a result of π–π interactions between dithiophenes belonging to adjacent molecules, which are hindered in the rotaxane. The fine molecular structure determined by STM was compared to that obtained by molecular modelling. The optical properties of both rotaxane and dumbbell in the solid state were investigated by steady‐state and time‐resolved photoluminescence (PL) experiments on spin‐cast films and diluted solutions. The comparison between the optical features of the threaded and unthreaded systems reveals an effective role of encapsulation in reducing aggregation and exciton migration for the rotaxanes with respect to the dumbbells, thus leading to higher PL quantum efficiency and preserved single‐molecule photophysics for longer times after excitation in the threaded oligomers.     

自动清洗的变速控制方法

全自动划片机是融合精密机械、电子、软件、材料、自控、光电、元器件等多学科技术为一体的IC装备。高速清洗系统作为全自动划片产品的重要组成部分,直接影响着设备整体工作的质量和效率。本文对清洗系统的变速控制和精确回零技术做了初步的探讨。伺服系统采用内部速度模式的变速控制方法,解决了大转动惯量下位置控制无法稳定的问题。清洗完成后,系统寻址高精度传感器,完成清洗台上下料的回零定位。     

Ultrathin Polydopamine Films with Phospholipid Nanodiscs Containing a Glycophorin A Domain

Cellular membranes have long served as an inspiration for nanomaterial research. The preparation of ultrathin polydopamine (PDA) films with integrated protein pores containing phospholipids and an embedded domain of a membrane protein glycophorin A as simplified cell membrane mimics is reported. Large area, ultrathin PDA films are obtained by electropolymerization on gold surfaces with 10–18 nm thickness and dimensions of up to 2.5 cm². The films are transferred from gold to various other substrates such as nylon mesh, silicon, or substrates containing holes in the micrometer range, and they remain intact even after transfer. The novel transfer technique gives access to freestanding PDA films that remain stable even at the air interfaces with elastic moduli of ≈6–12 GPa, which are higher than any other PDA films reported before. As the PDA film thickness is within the range of cellular membranes, monodisperse protein nanopores, so‐called “nanodiscs,” are integrated as functional entities. These nanodisc‐containing PDA films can serve as semi‐permeable films, in which the embedded pores control material transport. In the future, these simplified cell membrane mimics may offer structural investigations of the embedded membrane proteins to receive an improved understanding of protein‐mediated transport processes in cellular membranes.     

An improved common-mode feedback loop for the differential-difference amplifier

Unconditional stability of the high-gain amplifiers is a mandatory requirement for a reliable steady-state condition of time-discrete systems, especially for all blocks designed to sample-and-hold (S/H) circuits. Compared to differential path, the common-mode feedback loop is often affected by poles and zeros shifting that degrades the large signal response of the amplifiers. This drawback is made worse in some well-known topologies as the difference-differential amplifier (DDA) that shows non-constant transconductance and poor linearity. This work proposes a body-driven positive-feedback frequency compensation technique (BD-PFFC) to improve the linearity for precision DDA-based S/H applications. Theoretical calculations and circuit simulations carried out in a 0.13 μm process are also given to demonstrate its validity.