Urodynamic picture in high spinal cord ischemia, induced by addictive use of cocaine. Report of a case

Since in vitro experiments had excluded interactions between Fe-gluconate (Fe-gluc) and magnesium-L-aspartate hydrochloride (MAH) in aqueous solutions the present in vivo studies seemed to be justified. Animal studies: Rats were kept on magnesium-(Mg)- and iron-(Fe)- sufficient and deficient diets. The intragastral administration of Fe-gluc significantly increased plasma Fe after 3 h, either given alone, or in combination with MAH (inducing hypermagnesemia). Same results were obtained when fortified diets were offered to Fe/Mg-deficient animals. Human studies: The combination of Fe-gluc (2 x 50 mg Fe per day, per os) plus MAH (2 x 7.5 mmol Mg per day, p.o.) was well tolerated by healthy volunteers. Single dose experiments revealed that Fe-gluc alone and in combination with MAH increased plasma Fe levels during 3 h to the same extent. Two groups of pregnant women with moderately reduced hemoglobin levels either received Fe-gluc (out-patients) or its combination with MAH (at least temporarily hospitalised because of preterm labor). Treatments were well tolerated. Hemoglobin levels did not further decrease, as expected without Fe supplements, during the course of pregnancy, thus indicating the therapeutic availability of the electrolytes in both study groups. Progesterone-induced constipation is frequently observed during pregnancy; hence stool softening reported by 50% of the women receiving Fe-gluc plus MAH (versus 33% in the Fe-gluc group) can be regarded as desirable effect. It is concluded that MAH does not interfere with the enteral absorption of Fe-gluc when both electrolytes are orally administered together. Taking both electrolytes together instead of 2 to 3 h apart from each other, as actually recommended, means a less complicated dosage regimen and probably improves compliance.     

Automatically running experiments on checking multi-party contracts

Contracts play an important role in business management where relationships among different parties are dictated by legal rules. Electronic contracts have emerged mostly due to technological advances and electronic trading between companies and customers. New challenges have then arisen to guarantee reliability among the stakeholders in electronic negotiations. In this scenario, automatic verification of electronic contracts appeared as an imperative support, specially the conflict detection task of multi-party contracts. The problem of checking contracts has been largely addressed in the literature, but there are few, if any, methods and practical tools that can deal with multi-party contracts using a contract language with deontic and dynamic aspects as well as relativizations, over the same formalism. In this work we present an automatic checker for finding conflicts on multi-party contracts modeled by an extended contract language with deontic operators and relativizations. Moreover a well-known case study of sales contract is modeled and automatically verified by our tool. Further, we performed practical experiments in order to evaluate the efficiency of our method and the practical tool.

     

Context relevance assessment and exploitation in mobile recommender systems

In order to generate relevant recommendations, a context-aware recommender system (CARS) not only makes use of user preferences, but also exploits information about the specific contextual situation in which the recommended item will be consumed. For instance, when recommending a holiday destination, a CARS could take into account whether the trip will happen in summer or winter. It is unclear, however, which contextual factors are important and to which degree they influence user ratings. A large amount of data and complex context-aware predictive models must be exploited to understand these relationships. In this paper, we take a new approach for assessing and modeling the relationship between contextual factors and item ratings. Rather than using the traditional approach to data collection, where recommendations are rated with respect to real situations as participants go about their lives as normal, we simulate contextual situations to more easily capture data regarding how the context influences user ratings. To this end, we have designed a methodology whereby users are asked to judge whether a contextual factor (e.g., season) influences the rating given a certain contextual condition (e.g., season is summer). Based on the analyses of these data, we built a context-aware mobile recommender system that utilizes the contextual factors shown to be important. In a subsequent user evaluation, this system was preferred to a similar variant that did not exploit contextual information.     

An infrastructure for smart hospitals

In healthcare facilities most of the daily activities require strict coordination between clinicians, who often operate under heavy workloads and minimal workforce conditions in environments filled with increasingly complex technology. Ubiquitous Computing applications constitute a suitable solution for both reducing medical costs and improving patient safety by better supporting clinical processes. In this study we introduce an intelligent infrastructure for smart hospitals which implements basic services to optimize medical staff/patient interactions and grants ubiquitous and transparent access to clinical data stored in standard clinical databases. This infrastructure relies on the integration of Radio Frequency IDentification (RFID) and photosensor technologies to identify, locate and track clinicians and patients equipped with mobile devices and wearable RFID tags.     

Microfluidic motion for a direct investigation of solvent interactions with PDMS microchannels

Solid surface/liquid interactions play an important role in microfluidics and particularly in manipulation of films, drops and bubbles, a basic requirement for a number of lab-on-chip applications. The behavior of solvents in coated microchannels is difficult to be predicted considering theories; therefore, experimental methods able to estimate the properties at the interface in real time and during the operational regime are amenable. Here, we propose to use an experimental setup to evaluate the effective dynamics of solvents inside PDMS microchannels. The influence of the solvent properties as well as of the channel wall’s wettability on the fluid movements was evaluated. Modification of the channel properties was achieved by introducing Teflon coatings that allow producing stable hydrophobic microchannel walls. The results were fitted according to Washburn-type power-law and compared with theoretical calculations of the parameter β that expresses the dependence of capillary dynamics on surface tension γ, liquid viscosity η, contact angles θ and the hydraulic radius R _H. A comparison between the calculated and the experimental values reveled that parameters other than the contemplated ones influenced the measurements. The main parameter that affects the flow of solvents such as water, methanol ethanol, dimethylformamide, acetonitrile and acetone was found to be the γ/η ratio. Considering these results, the investigation tool described here is believed to be promising to predict the dynamics of common organic solvents inside integrated functional fluidic devices and to accurately control solvent flow, particularly in capillary-driven pumpless systems, a basic requirement for widening the application range of PDMS lab-on-chip devices.     

Resistant starch formation during baking -effect of baking time and temperature and variations in the recipe

Summary The dietary fibre content in white wheat bread, measured with an enzymatic, gravimetric method, was almost 20% higher than in the corresponding flour. The increment was largely explained by the formation of resistant starch, i.e. starch available to amyloglucosidase only after solubilization with 2m-KOH. The resistant starch was formed in the oven or upon cooling of the finished bread. The water content in the dough seemed to influence the extent of the resistant starch formation, whereas changes in the fat content had no effect. The results indicate that the resistant starch might be hard retrograded starch, possibly amylose.

---

Bildung von resistenter Stärke während des Backens in Abhängigkeit von Backzeit, Backtemperatur und Rezeptvariationen

Zusammenfassung Die Menge an Ballaststoffen, die nach einer enzymatisch-gravimetrischen Methode bestimmt wurde, war in weißem Weizenbrot fast 20% höher als in dem entsprechendem Mehl. Die Erhöhung konnte zum großen Teil auf die Bildung von resistenter Stärke zurückgeführt werden, d. h. auf eine Stärkefraktion, die nur nach Auflösung mit 2m-KOH für Amyloglucosidase zugänglich ist. Die resistente Stärke wird während des Backens oder während der Abkühlung des Brotes gebildet, und die Menge scheint vom Wassergehalt des Teiges, aber nicht vom Fettgehalt abhängig zu sein. Die Resultate dieser Untersuchung weisen darauf hin, daß die resistente Stärke retrogradierte Stärke, möglicherweise Amylose, ist.

     

Modeling guided wave propagation with application to the long-range defect detection in railroad tracks

The aim of this work is to demonstrate the use of a commercial finite element package, ABAQUS EXPLICIT, to model ultrasonic guided waves in structural components. The particular application of interest is modeling the interaction of a broadband vertical bending mode with transverse-type defects in railroad tracks. This topic is part of a broader project on high-speed defect detection in rails by long-range ultrasonic inspections. Reflection coefficient spectra in the 20–45 kHz range are obtained for four different sizes and three different orientations of transverse head flaws. A preliminary study of Lamb waves in a free plate helps drawing modeling guidelines for the rail.     

The Landscape of microRNAs in βCell: Between Phenotype Maintenance and Protection

Diabetes mellitus is a group of heterogeneous metabolic disorders characterized by chronic hyperglycaemia mainly due to pancreatic β cell death and/or dysfunction, caused by several types of stress such as glucotoxicity, lipotoxicity and inflammation. Different patho-physiological mechanisms driving β cell response to these stresses are tightly regulated by microRNAs (miRNAs), a class of negative regulators of gene expression, involved in pathogenic mechanisms occurring in diabetes and in its complications. In this review, we aim to shed light on the most important miRNAs regulating the maintenance and the robustness of β cell identity, as well as on those miRNAs involved in the pathogenesis of the two main forms of diabetes mellitus, i.e., type 1 and type 2 diabetes. Additionally, we acknowledge that the understanding of miRNAs-regulated molecular mechanisms is fundamental in order to develop specific and effective strategies based on miRNAs as therapeutic targets, employing innovative molecules.     

Novel (Phenothiazinyl)Vinyl-Pyridinium Dyes and Their Potential Applications as Cellular Staining Agents

We report here the synthesis and structural characterization of novel cationic (phenothiazinyl)vinyl-pyridinium (PVP) dyes, together with optical (absorption/emission) properties and their potential applicability as fluorescent labels. Convective heating, ultrasound irradiation and mechanochemical synthesis were considered as alternative synthetic methodologies proficient for overcoming drawbacks such as long reaction time, nonsatisfactory yields or solvent requirements in the synthesis of novel dye (E)-1-(3-chloropropyl)-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium bromide 3d and its N-alkyl-2-methylpyridinium precursor 1c. The trans geometry of the newly synthesized (E)-4-(2-(7-bromo-10-ethyl-10H-phenothiazin-3-yl)vinyl)-1-methylpyridin-1-ium iodide 3b and (E)-1-methyl-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium tetrafluoroborate 3a′ was confirmed by single crystal X-ray diffraction. A negative solvatochromism of the dyes in polar solvents was highlighted by UV-Vis spectroscopy and explanatory insights were supported by molecular modeling which suggested a better stabilization of the lowest unoccupied molecular orbitals (LUMO). The photostability of the dye 3b was investigated by irradiation at 365 nm in different solvents, while the steady-state and time-resolved fluorescence properties of dye 3b and 3a′ in solid state were evaluated under one-photon excitation at 485 nm. The in vitro cytotoxicity of the new PVP dyes on B16-F10 melanoma cells was evaluated by WST-1 assay, while their intracellular localization was assessed by epi-fluorescence conventional microscopy imaging as well as one- and two-photon excited confocal fluorescence lifetime imaging microscopy (FLIM). PVP dyes displayed low cytotoxicity, good internalization inside melanoma cells and intense fluorescence emission inside the B16-F10 murine melanoma cells, making them suitable staining agents for imaging applications.     

BRAF Gene and Melanoma: Back to the Future

As widely acknowledged, 40–50% of all melanoma patients harbour an activating BRAF mutation (mostly BRAF V600E). The identification of the RAS–RAF–MEK–ERK (MAP kinase) signalling pathway and its targeting has represented a valuable milestone for the advanced and, more recently, for the completely resected stage III and IV melanoma therapy management. However, despite progress in BRAF-mutant melanoma treatment, the two different approaches approved so far for metastatic disease, immunotherapy and BRAF+MEK inhibitors, allow a 5-year survival of no more than 60%, and most patients relapse during treatment due to acquired mechanisms of resistance. Deep insight into BRAF gene biology is fundamental to describe the acquired resistance mechanisms (primary and secondary) and to understand the molecular pathways that are now being investigated in preclinical and clinical studies with the aim of improving outcomes in BRAF-mutant patients.