Mechanical and dynamic mechanical properties of rice husk ash–filled natural rubber compounds

A laboratory‐sized two‐roll mill was used to incorporate rice husk ash into natural rubber (NR). A conventional vulcanization system was used for curing and cure studies were carried out on a Monsanto rheometer. Physical testing of the NR vulcanizates involved determining tensile and tear resistances and hardness. Swelling behavior of NR compounds and scanning electron microscopy were used to investigate the interaction between rice husk ash and natural rubber. Also, dynamical mechanical thermal analysis was used to assess filler–rubber interactions in terms of storage modulus (E′) and loss tangent (tan δ). For comparison purposes, two commercial fillers, precipitated silica (Zeosil‐175) and carbon black (N774), were also used. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2331–2346, 2002     

Chemical Composition Determination at the Bottom Region of a Recovery Boiler Furnace by Direct Minimization of Gibbs Free Energy

An optimization strategy has been applied to describe the chemical composition at the furnace bottom in the Kraft recovery boiler of a pulp production process. The concentrations of each involved chemical species were calculated through an optimization approach, minimizing the Gibbs free energy of the system. Various systems were proposed and tested, assuming different chemical species and phases number. Because serious initialization problems were found at this stage for some of the proposed systems, an optimization heuristic method (PSO) was used for the first approach to the problem. Once the appropriate phases number and chemical species in the system were determined, the initialization problems disappeared and the use of a deterministic optimization method (SQP) became viable. The proposed approach has shown to be satisfactory to reproduce industrial data and also data reported in the open scientific literature.     

Diffusion coefficients of tetrazolium blue in homogeneous and micellar solutions

Diffusion coefficients of the electron acceptor dye tetrazolium blue were measured by the Taylor dispersion method, with an accuracy better than 4%, in two solvents: (i) a homogeneous one-aqueous phosphate buffer, 0.1 M, pH=7.0 (medium I); and (ii) a heterogeneous one-nonionic micelles of Triton X-100, 2.0 mM (where M stands for mol·dm^–3), in the same aqueous phosphate buffer (medium II). The values obtained were D ₁₂ ^I =3.64×10^–10m²·s^–1 and D ₁₂ ^II =3.01×10^–10m²·s^–1·D ₁₂ ^II has the meaning of a macroscopird or average diffusion coefficient, in which the partition coefficient of tetrazolium blue between micelles and water, as well as the diffusion coefficients of this dye and of the micelles in the aqueous phase, are involved.     

Iron recovery from zinc mine tailings by magnetic separation followed by carbothermal reduction of self‐reducing briquettes

The volume of tailings produced by the extractive industry has been increasing due to the processing of the low‐grade ore. This issue can cause environmental accidents and require significant investment to control the disposal of tailings. Therefore, this study aims to recover iron from zinc mine tailings by wet magnetic separation followed by the carbothermal reduction of self‐reducing briquettes. Two magnetic separation routes were investigated to concentrate iron. Zinc mine tailings were processed by route I, in a rougher stage followed by a scavenger stage; and route II, in a rougher stage followed by a cleaner stage. The carbothermal reductions were performed using self‐reducing briquettes composed of Fe concentrate from the route with high Fe content and charcoal. The products were analyzed by scanning electron microscopy with energy dispersive spectroscopy (SEM‐EDS), x‐ray diffraction (XRD), inductively coupled plasma optical emission spectrometry (ICP‐OES), and volumetric chemical analysis. Magnetic separation route II provided the highest‐grade Fe concentrate, 52% Fe, while route I provided 33% Fe. In the carbothermal reductions, a metallization degree of 98% in the Fe concentrate briquette, 97% in the briquette with a 10% replacement of its raw material by Fe concentrate, and 99% in the hematite briquette was reached. The replacement of raw material by Fe concentrate showed no significant change in Fe recovery. Considering the whole process, magnetic separation and carbothermal reduction, the recovery of Fe from the zinc mine tailings was 67%. Therefore, the process route suggested in this study will not only reduce tailings disposal and consequently the risk of environmental accidents, but it will also provide profitable raw material for the steel industry.     

Simple approach for the plasma treatment of polymeric membranes and investigation of the aging effect

The modification of the surface characteristics after treatment with plasma in polymeric materials, such as the aging phenomenon, calls the attention of research in the area of nonthermal plasma technology. In this work, a direct treatment with dielectric-barrier discharge plasma was used on the surfaces of ultrafiltration membranes. The measurements of the contact angle with water, attenuated total reflectance accessory, zeta potential, atomic force microscopy and scanning electron microscopy-MEV were performed on the surfaces to verify changes after plasma treatment and to understand the occurrence and timing of the plasma aging effect. In the analysis of the membrane performance, hydraulic permeation and protein retention tests were performed. The results showed an improvement in wettability and hydrophilic properties in the post-treated membranes. The study of reversibility/aging of the post-plasma surface is important for research that deals with the modification of polymeric membranes. Changes in surface morphology, topography and wettability of the membranes were observed up to seven days after treatment, with a tendency to return to the initial characteristics of the membranes.     

Rheological,thermal and morphological properties of polyethylene terephthalate/polyamide 6/rice husk ash composites

This work deals with the rheological, morphological, and thermal properties of composites having poly(ethylene terephthalate) (PET), polyamide-6 (PA6), and their blends as matrices, and rice husk ash (RHA) as a filler. The study determines the effect of composition on the change in viscosity and rate of degradation during processing in a torque rheometer. Our data indicates that thermal stability and degradation during processing depend on matrix composition and filler concentration. SEM micrographs show both partial adhesion of the filler to the matrices and filler pullout. Optical microscopy shows particle agglomeration and that agglomerate size increased with filler content. FTIR investigates the shifting of absorption bands of PET/PA6 composite after the addition of RHA and attributes the selective dispersion of RHA to the formation of hydrogen bonds. Our data supports the idea that filler employed here is an option to develop polymer composites with improved properties.     

Long-term effect of diesel degradation on polyoxymethylene at different temperatures

Diesel is an important fuel, partly because of the longevity and cleanliness of diesel engines. Often, polymers are in direct contact with diesel and understanding compatibility is critical. Polyoxymethylene (POM) is a thermoplastic used to manufacture automotive fuel pump gears and rotors due to its low coefficient of friction and thermal and dimensional stability. In this study, tensile tests were performed on plain and glass fiber reinforced (POM and POMGF) after immersion in diesel at different temperatures (−10°C, 23°C, and 60°C) for 1000, 2000, 3000, 5000, and 10 000 hour. A mathematical model was developed using data from just three tensile stress-strain curves obtained at two different fluid temperatures and three different immersion times. Model and experimental results show good agreement with one another for all conditions tested.     

The Pupal Parasitoid Trichopria drosophilae Is Attracted to the Same Yeast Volatiles as Its Adult Host

Journal of Chemical Ecology - There is increasing evidence that microorganisms, particularly fungi and bacteria, emit volatile compounds that mediate the foraging behaviour of insects and therefore...     

Polydimethylsiloxane based polyurethane and its composite with layered double hydroxide: Synthesis and its thermal properties

This investigation reports the synthesis of a new class of polyurethane (PU) based on bis(hydroxyalkyl) polydimethylsiloxane (PDMS) as diol and isophorone diisocyanate as diisocyanate followed by the preparation of PU/layered double hydroxide (PU/LDH) nanocomposite via ex-situ technique. Nuclear magnetic resonance and Fourier-transform infrared spectroscopy studies confirm the formation of PU and incorporation of PDMS into the PU backbone. Thermogravimetry analysis revealed that thermal stability of the composite improves significantly with incorporation of LDH into the PU matrix. This may be accredited to the barrier effect rendered by the LDH layers. Differential scanning calorimetry study reveals that with the incorporation of LDH, glass transition temperature (T_g) of the composite increases for an optimum level of loading beyond which it remains constant.     

Corrosion protection of NdFeB magnets by phosphating with tungstate incorporation

In this investigation the effect of surface treatments on the corrosion resistance of a commercial NdFeB sintered magnet has been investigated. A solution of 10 g L^− 1 NaH₂PO₄, acidified to pH 3.8 has been used for phosphating this magnet. The corrosion resistance of the phosphated magnet was investigated in a 0.10 mol L^− 1 Na₂SO₄ solution by electrochemical impedance spectroscopy and cyclic voltammetry with rotating disc electrode. The obtained results reveal that the resistance decreases with exposure time due to the development of pores and/or defects in the conversion coating exposing the substrate to corrosive attack. The effect of tungstate incorporation into the phosphate conversion coating resulting from a phosphating treatment prior to immersion in the tungstate solution was evaluated. The proposed treatment consists of re-immersing the phosphated samples in a 0.1 mol L^− 1 Na₂WO₄ solution during 72 h at the open circuit potential (OCP). Under these conditions, the corrosion resistance of the magnet was improved and this was attributed to the formation of a protective layer due to the adsorption of tungstate anions at the metallic substrate exposed in the coating, decreasing metal dissolution.