A Tree-Based Data Collecting Network Structure for Wireless Sensor Networks

In a sensor network with a large number of densely populated sensor nodes, a single target of interest may be detected by multiple sensor nodes simultaneously. Data collected from the sensor nodes are usually highly correlated, and hence energy saving using in-network data fusion becomes possible. A traditional data fusion scheme starts with dividing the network into clusters, followed by electing a sensor node as cluster head in each cluster. A cluster head is responsible for collecting data from all its cluster members, performing data fusion on these data and transmitting the fused data to the base station. Assuming that a sensor node is only capable of handling a single node-to-node transmission at a time and each transmission takes T time-slots, a cluster head with n cluster members will take at least nT time-slots to collect data from all its cluster members. In this paper, a tree-based network structure and its formation algorithms are proposed. Simulation results show that the proposed network structure can greatly reduce the delay in data collection.     

A comprehensive compact-modeling methodology for spiral inductors in silicon-based RFICs

A new comprehensive wide-band compact-modeling methodology for on-chip spiral inductors is presented. The new modeling methodology creates an equivalent-circuit model consisting of frequency-independent circuit elements. A fast automated extraction procedure is developed for determining the circuit element values from two-port S-parameter measurement data. The methodology is extremely flexible in allowing for accurate modeling of general classes of spiral inductors on high- or low-resistivity substrate and for large spirals exhibiting distributed trends. The new modeling methodology is applied to general classes of spirals with various sizes and substrate parameters. The extracted models show excellent agreement with the measured data sets over the frequency range of 0.1-10 GHz.     

Effect of mixed solvents on PCDTBT:PC70BM based solar cells

We investigated the effect of solvents on the morphology, charge transport and device performance of poly[N-9″-hepta-decanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)] (PCDTBT) and [6,6]-phenyl C71-butyric acid methyl ester (PC₇₀BM) based solar cells. To carry out this investigation, chloroform and 1,2-dichlorobenzene were chosen as good solvents of the two compounds. Films prepared with chloroform exhibit larger domains than those prepared with 1,2-dichlorobenzene and their size increases with the amount of PC₇₀BM. Fine tuning of the domain size was realized by using a solvent of mixed chloroform and 1,2-dichlorobenzene. At a mixing ratio of 50%:50%, a power conversion efficiency of 6.1% was achieved on PCDTBT:PC₇₀BM (1:3) devices with an active area of 1 cm², under air mass 1.5 global (AM 1.5 G) irradiation at 100 mW/cm².     

Modelling of through silicon via and devices electromagnetic coupling

This paper is essentially composed of two parts for future synthesis. We developed 2D and 3D simulations, starting from a 0.35 μm standard CMOS technology, focusing on through silicon via or redistribution layer induced coupling; nMOSFET, pMOSFET, and the sensitive regions of the CMOS inverter are investigated. We also study stacked devices in 3D circuits, in the radiofrequency range, and propagation of electromagnetic waves along some interconnections with discontinuities. This study is performed in the time domain—a finite-difference time-domain method is applied to the analysis of some vias flanked by two striplines, all embedded in silicon. Electric and magnetic field distributions, transmission and reflexion parameters, and pulse propagations along a transverse via are presented.     

Laser-Empowered Random Metasurfaces for White Light Printed Image Multiplexing

Printed image multiplexing based on the design of metasurfaces has attracted much interest in the past decade. Optical switching between different images displayed directly on the metasurface is performed by altering the parameters of the incident light such as polarization, wavelength, or incidence angle. When using white light, only two-image multiplexing is implemented with polarization switching. Such metasurfaces are made of nanostructures perfectly controlled individually, which provide high-resolution pixels but small images and involve long fabrication processes. Here, it is demonstrated that laser processing of nanocomposites offers a versatile low-cost, high-speed method with large area processing capabilities for controlling the statistical properties of random metasurfaces, allowing up to three-image multiplexing under white light illumination. By independently controlling absorption and interference effects, colors in reflection and transmission can be varied independently yielding two-image multiplexing under white light. Using anisotropy of plasmonic nanoparticles, a third image can be multiplexed and revealed through polarization changes. The design strategy, the fundamental properties, and the versatility of implementation of these laser-empowered random metasurfaces are discussed. The technique, applied on flexible substrate, can find applications in information encryption or functional switchable optical devices, and offers many advantages for visual security and anticounterfeiting.     

An effective bilayer cathode buffer for highly efficient small molecule organic solar cells

Novel organic/ultrathin low work function metal bilayer cathode buffers for small molecule organic solar cells are proposed. Ultrathin low work function metal layers possess a high built-in electric field for effective carrier extraction and a high cathode reflectivity for maximum absorption in the photoactive layers. This leads to a significant increase of short circuit current density and fill factor of cells. By integrating this bilayer cathode buffer with DTDCTB:C₆₀ small molecular heterojunction, the device exhibits a high power conversion efficiency of up to 5.28%, which is an improvement of 22% compared to a device with a traditional single organic layer buffer.     

蓝晶石和石英浮选行为的研究（待续）

通过表面张力测试、浮选试验和红外光谱的测定，研究了蓝晶石和石英在阴／阳离子混合表面活性剂系统中的浮选行为。研究结果说明了表面活性剂混合物引起的表面张力下降中的协同作用。在浮选系统中，由于这一协同作用的存在，油酸钠／十二胺的添加导致在很宽的ｐＨ范围内，浮选回收率提高。文中还分析了在阴／阳离子混合表面活性剂系统中捕收剂的吸附机理。     

The effect of increased interrogation zone,reader antenna polarization and application factors in the performance of UHF RFID tag detection on modified atmosphere packaged meat

The effect of conveyor speed, test sample size, antenna to sample distance, antenna polarization and ideal tag location in relation to the coupling capabilities of ultra‐high frequency radio frequency identification on optimal reader antenna placement were studied. The influence of each individual factor and its interaction was determined using the general linear model analysis of variance. In decreasing order of significance of the variables tested were sample type (F = 4174.40, p < 0.0005), smaller samples preferred for coupling; distance (F = 863.83, p < 0.0005), where distance between sample and antenna should be kept to a minimum; inlay design (F = 167.82, p < 0.0005), where AD‐612 preformed best due to its large antenna area; and reader antenna polarization (F = 149.64, p < 0.0005), where circular polarization preformed better yet comparative advantage decreased with distance. A reader antenna offset of 95 mm, while not significant, (F = 1.73, p = 0.188) tended to decrease coupling capabilities of the system despite increasing the zone of influence. Ideal tag location on sample was found to be on the right, back and front face with y‐orientation proving superior than either x or z. A 190‐mm centre–to‐centre reader antenna offset resulted in a decrease in the average tag detection rate from 62 to 49% highlighting the importance of optimal reader antenna placement which needs to be confirmed if a similar result is to be obtained when a large number of tags are interrogated simultaneously. Copyright © 2010 John Wiley & Sons, Ltd.     

Leydig cell function in mice lacking connexin43

Connexin43 (Cx43) is the most abundantly expressed member of the connexin (gap junction protein) family and the only one so far identified in mouse Leydig cell gap junctions. Mice lacking Cx43 were used to investigate its role in testicular androgen production and regulation. Testes from term fetuses were grafted under the kidney capsules of castrated adult males. After 3 weeks, serum from host mice was analyzed for androgens. In order to test their response to stimulation, the grafted testes were incubated in vitro with varying concentrations of LH and their androgen end products analyzed. Incubation with radiolabeled progesterone was followed by high performance liquid chromatography to quantify the androgen-intermediate metabolites. Radiolabeled testosterone in the presence of NADPH was used to determine the activity of testosterone-metabolizing enzymes 17beta-hydroxysteroid dehydrogenase (17betaHSD), 5alpha-reductase (5alphaR), and 3alpha-hydroxysteroid dehydrogenase (3alpha HSD). Serum androgen levels did not differ between hosts carrying wild-type versus null mutant grafts although Cx43-deficient testes had more 17betaHSD and 5alphaR activity than wild-type controls. Furthermore, the genotype of grafted testes did not influence LH-stimulated androgen production in vitro. These results indicate that the steroidogenic function of Leydig cells is not compromised by the absence of Cx43, perhaps because other gap junction proteins are present. Dye transfer experiments demonstrated that Cx43-deficient Leydig cells retain intercellular coupling, indicating that Cx43 is not the only protein contributing to their gap junctions. Thus, despite their prominence in Leydig cells, Cx43 gap junctions are not essential for androgen production.