The effects of modes of hydrogen input and reactor configuration on reaction rate and H2 efficiency in the catalytic hydrogenation of alkynol to alkenol

Hydrogenation often involves three phases where hydrogen-on-demand is the typical mode of operation in industrial scale reactors. In research labs and publications, however, continuous hydrogen flow has been used. This paper investigates the effect of such modes of operation on reaction rate using a selective hydrogenation of 3-butyn-2-ol over Pd/Al₂O₃ to obtain 3-buten-2-ol as the model reaction. The two modes of operation were first tested in a commercial PARR stirred tank reactor and then repeated in an oscillatory baffled reactor (OBR) in order to validate the experimental results. Our investigation demonstrates that an enhanced reaction performance and 10 times better H₂ efficiency were obtained when the pressure was maintained constant during the reaction by feeding gas as required, ie hydrogen-on-demand mode. The method of a continuous flow of hydrogen in hydrogenation means that excess hydrogen is vented out when operating at ambient pressures or builds up at elevated pressures. Our work also enables a comparison of reactor designs on reactor performance, and three times higher H₂ efficiency and 2.3 times shorter residence time were achieved when using the OBR instead of the PARR due to its enhanced and uniform mixing, regardless of the mode of operation.     

Artificial ponds in a Mediterranean region (Andalusia,southern Spain): agricultural and environmental issues

A total of 16 543 artificial ponds were inventoried. Ninety‐one per cent of the ponds were classified as for farming use. Generally, the fraction of farm land converted to pond structures was close to that predicted from the average annual precipitation in the region. However, in several areas, this fraction was remarkably higher than the value predicted, probably due to excessive groundwater extraction. Overall, the naturalisation stage of ponds was poor. However, ponds sited on natural substrate basins had more structured‐marginal vegetation, compared with ponds of artificial substrate basins. Furthermore, other factors related to pond management might seriously limit their naturalisation stage. Despite the high abundance of ponds in Andalusia, our results suggest that, in order to improve the potential for biodiversity conservation in these environments, substantial structural and management changes are required.     

Yeast associated with spontaneous fermentations of white wines from the "Txakoli de Bizkaia" region (Basque Country,North Spain)

The microbiota of eight spontaneous fermentation of white wine from different grape varieties and different wineries from the "Txakoli de Bizkaia" region (Basque country, North Spain), in 1996 and 1997 campaigns was studied. The yeast population was higher in grapes harvested in 1997, in which late summer and early autumn was warmer and drier. Eight species belonging to five genera were identified in total. The most frequent genera in grapes were Rhodotorula in 1996 and Kloeckera in 1997. Saccharomyces bayanus was the most frequent species during vigorous and final fermentation, and it was occasionally isolated from grapes and must. Only another Saccharomyces spp., i.e., S. kluyvery, was identified in some samples from 1997.     

Influence of V(C,N) Precipitates on Microstructure and Mechanical Properties of Continuous Cooled C-Mn-V

The effect of chemical composition and processing parameters on the formation of acicular ferrite and/or bainite has been investigated.In particular,this paper deals with the influence that N through its combination with V,as V(C,N) precipitates,has on the decomposition of austenite.Likewise,the intragranular nucleation potency of V(C,N) precipitates is analyzed through the continuous cooling transformation diagrams (CCT) of two C-Mn-V steels with different contents of N.Results reported in this work allow us to conclude that acicular ferrite can only be achieved alloying with vanadium and nitrogen,meanwhile bainite is promoted in steels with a low level of nitrogen.It is concluded that higher strength values are obtained in acicular ferrite than in bainitic steel but a similar brittle-ductile transition temperature (BDT),and lower values of impact absorbed energy (KV) has been recorded in nitrogen-rich steel.     

Concentrations of selected metals in honey consumed in Nigeria

The concentration of metals, cadmium (Cd), lead (Pb), nickel (Ni), chromium (Cr), copper (Cu), cobalt (Co), iron (Fe), manganese (Mn), and zinc (Zn) was measured in selected samples of honey in Nigeria with a view to providing information on the regional concentration profile of metals in these honeys. The honey samples were digested with a mixture of acids and analysed for metal concentrations using atomic absorption spectrophotometry. The concentrations of metals (mg kg^?1) in these honeys ranged from < 0.3 for Cd,<0.50–39.75 for Pb,<0.25–6.98 for Ni,<0.25–55.25 for Cr,<0.25–71.25 for Cu,<0.25–3.50 for Co,<5.0–163.15 for Fe,<11.0–31.75 for Mn and 1.0–31.0 for Zn. The concentrations of metals were relatively high but lower than their respective permissible limits in food except for Pb and Cu in some samples. The regional distribution patterns of metals indicated that honey samples from the Niger Delta region of Nigeria had higher mean concentrations of Ni, Cr, Co, Fe and Zn than honey samples from other regions. The honey samples from the northern region had higher mean concentrations of Pb and Cu.     

A DNA region of Torulaspora delbrueckii containing the HIS3 gene: sequence, gene order and evolution

We cloned a genomic DNA fragment of the yeast Torulaspora delbrueckii by complementation of a Saccharomyces cerevisiae his3 mutant strain. DNA sequence analysis revealed that the fragment contained two complete ORFs, which share a high similarity with S. cerevisiae His3p and Mrp51p, respectively. The cloned TdHIS3 gene fully complemented the his3 mutation of S. cerevisiae, confirming that it encodes for the imidazoleglycerol-phosphate dehydrate of T. delbrueckii. Two additional ORFs, with a high homology to S. cerevisiae PET56 and DED1 genes, were mapped upstream and downstream from TdHIS3 and TdMRP51, respectively. This genetic organization is analogous to that previously found in Saccharomyces kluyveri and Zygosaccharomyces rouxii. The evolutionary significance of gene order in this chromosomal region is analysed and discussed.     

Polymer Nanoparticles Encased in a Cyclodextrin Complex Shell for Potential Site‐ and Sequence‐Specific Drug Release

Time‐staggered combination chemotherapy strategies show immense potential in cell culture systems, but fail to successfully translate clinically due to different routes of administration and disparate formulation parameters that preclude a specific order of drug presentation. A novel platform consisting of drug‐containing PLGA polymer nanoparticles, stably fashioned with a shell composed of drug complexed with cationic cyclodextrin, capable of releasing drugs time‐ and sequence‐specifically within tumors is designed. Morphological examination of nanoparticles measuring 150 nm highlight stable and distinct compartmentalization of model drugs, rhodamine and bodipy, within the core and shell, respectively. Sequential release is observed in vitro, owing to cyclodextrin shell displacement and subsequent sustained release of core‐loaded drug, kinetics preserved in breast cancer cells following internalization. Importantly, time‐staggered release is corroborated in a murine breast cancer model following intravenous administration. Precise control of drug release order, site‐specifically, potentially opens novel avenues in polychemotherapy for synergy and chemosensitization strategies.     

Basophil Activation Test Utility as a Diagnostic Tool in LTP Allergy

Plant-food allergy is an increasing problem, with nonspecific lipid transfer proteins (nsLTPs) triggering mild/severe reactions. Pru p 3 is the major sensitizer in LTP food allergy (FA). However, in vivo and in vitro diagnosis is hampered by the need for differentiating between asymptomatic sensitization and allergy with clinical relevance. The basophil activation test (BAT) is an ex vivo method able to identify specific IgE related to the allergic response. Thus, we aimed to establish the value of BAT in a precise diagnosis of LTP-allergic patients. Ninety-two individuals with peach allergy sensitized to LTP, Pru p 3, were finally included, and 40.2% of them had symptoms to peanut (n = 37). In addition, 16 healthy subjects were recruited. BAT was performed with Pru p 3 and Ara h 9 (peanut LTP) at seven ten-fold concentrations, and was evaluated by flow cytometry, measuring the percentage of CD63 (%CD63⁺) and CD203c (%CD203c^high) cells, basophil allergen threshold sensitivity (CD-Sens), and area under the dose–response curve (AUC). Significant changes in BAT parameters (%CD63⁺ and %CD203c^high) were found between the controls and patients. However, comparisons for %CD63⁺, %CD203c^high, AUC, and CD-Sens showed similar levels among patients with different symptoms. An optimal cut-off was established from ROC curves, showing a significant positive percentage of BAT in patients compared to controls and great values of sensitivity (>87.5%) and specificity (>85%). In addition, BAT showed differences in LTP-allergic patients tolerant to peanut using its corresponding LTP, Ara h 9. BAT can be used as a potential diagnostic tool for identifying LTP allergy and for differentiating peanut tolerance, although neither reactivity nor sensitivity can distinguish the severity of the clinical symptoms.