Effect of processing on water absorption and softening kinetics in chickpea (Cicer arietinumL) seeds

The processing effect on the physical properties of chickpea seeds (kabuli type cv Athenas) is reported. Soaking of chickpea seeds in different solutions (distilled water, 0·5% NaHCO₃ and 0·5% CaCl₂) is characterised by a rapid water absorption followed by a decrease in the hydration rate to saturation point. An improvement in chickpea softening rate and water absorption during cooking, with previous 12 h soaking in 0·5% NaHCO₃, was observed. The presence of Ca²⁺ ions delayed the softening process in chickpea seeds. Physicochemical changes associated to the soaking and cooking process necessary for reducing cooking time are discussed. The texturometer method was estimated as a suitable objective method for the evaluation of the cooking degree in chickpea seeds. © 1998 Society of Chemical Industry     

Muscle tissue structural changes and texture development in sea bream, Sparus aurata L., during post-mortem storage

Sea bream, Sparus aurata L., specimens were studied in pre-rigor (3 h) and during the following post-mortem days: 1, 5, 10, 15 and 22. Muscle and textural parameters were evaluated on 6 specimens/stage. Structural results showed scarce fibre-to-fibre detachment on pre-rigor, which increased during the post-mortem degradation. Ultrastructural changes revealed rapid muscle degradation. In pre-rigor myofibrils were detached to both sarcolemma and endomysium. Intermyofibrillar spaces increased and some mitochondriae and sarcoplasmic reticulum were swollen. After 1 day, the sarcolemma appeared occasionally disrupted and the interfibrillar spaces increased. From 5 to 10 days, the I-band and Z line presented some alterations, although these were more severe at 15-22 days. Thus, in these two last stages, loss of I-band, Z line and actin filaments was observed, that coincides with the alteration of the hexagonal arrangement in these advanced stages. Also, the fragmentation of myofibrils increased from 5 to 10 days on. Sarcolemma and endomysium were gradually disrupted throughout the post-mortem stages with total loss at 22 days. Consequently, the interfibrillar spaces increased at last stages. Autophagic mechanisms increased from 5 days on, with an intense destruction of all the intracytoplasmic organelles. Textural parameters decreased from pre-rigor until 5-10 days, mainly associated to detachment of myofibers to sarcolemma-endomysium.     

Partial Purification and Characterization of Extracellular Fructofuranosidase with Transfructosylating Activity from <Emphasis Type="Italic">Candida</Emphasis> sp.

The present work was carried out with the aim to investigate some properties of an extracellular fructofuranosidase enzyme, with high transfructosylating activity, from Candida sp. LEB-I3 (Laboratory of Bioprocess Engineering, Unicamp, Brazil). The enzyme was produced through fermentation, and after cell separation from the fermented medium, the enzyme was concentrated by ethanol precipitation and than purified by anion exchange chromatography. The enzyme exhibited both fructofuranosidase (FA) and fructosyltransferase (FTA) activities on a low and high sucrose concentration. With sucrose as the substrate, the data fitted the Michaellis–Menten model for FA, showing rather a substrate inhibitory shape for fructosyltransferase activity. The K _m and v _max values were shown to be 13.4 g L⁻¹ and 21.0 μmol mL⁻¹ min⁻¹ and 25.5 g L⁻¹ and 52.5 μmol mL⁻¹ min⁻¹ for FA and FTA activities, respectively. FTA presented an inhibitory factor K _i of 729.8 g L⁻¹. The optimum conditions for FA activity were found to be pH 3.25–3.5 and temperatures around 69 °C, while for FTA, the optimum condition were 65 °C (±2 °C) and pH 4.00 (±0.25). Both activities were very stable at temperatures below 60 °C, while for FA, the best stability occurred at pH 5.0 and for FTA at pH  4.5–5.0. Despite the strong fructofuranosidase activity, causing hydrolysis of the fructooligosaccharides (FOS), the high transfructosilating activity allows a high FOS production from sucrose (44%).     

Free fatty acids and oxidative changes of a raw goat milk cheese through maturation

Free fatty acids (FFA) and lipid and protein oxidation changes were studied throughout maturation process of a raw goat milk cheese with protected designation of origin. Cheeses were analyzed at 4 different times of maturation, at 1, 30, 60, and 90 d. All FFA significantly increased during maturation and the relative increase was higher for long-chain than medium- or short-chain FFA. At the end of maturation, oleic (C18:1 n9), butyric (C4:0), and palmitic (C16:0) acids were the most abundant. The higher levels of short-chain fatty acids (SCFA) regarding total FFA obtained at the end of Ibores cheese ripening compared with other raw goat milk cheeses, highlight the notable role of SCFA on the flavor of this cheese owing to their low-odor thresholds. Lipid oxidation values significantly increased during maturation process but low levels of malondialdehyde were reported; however, protein oxidation did not significantly change during ripening.     

Occurrence of acetic acid and formic acid in breakfast cereals

Breakfast cereals are usually manufactured by extrusion followed by drying and toasting steps in which thermal treatments are applied. In addition, owing to the low water activity and the content in cereals of proteins and carbohydrates, precursors of the Maillard reaction, this reaction and degradation of sugars are favoured during processing. Acetic and formic acids have been identified as final products of Maillard reaction (MR) and sugar caramelisation. Acetic and formic acid contents have been determined by ion exchange high‐performance liquid chromatography in 56 commercial breakfast cereals. Results were evaluated taking into account the sample formulation. Acetic and formic acids were detected in all samples, and significant variations were observed for acetic acid depending on the protein and fibre content. Acetic acid, originating from 1‐deoxyglucosone cleavage during MR, proved to be a good indicator of processing in cereals enriched with or based on wheat flour because of their high protein content. Fibre addition increased acetic acid concentration. The application of acetic acid as a chemical marker of processing in breakfast cereals and its possible generation pathways are discussed. Copyright © 2006 Society of Chemical Industry     

Advances in Wine Aging Technologies for Enhancing Wine Quality and Accelerating Wine Aging Process

Wine aging is an important process to produce high-quality wines. Traditionally, wines are aged in oak barrel aging systems. However, due to the disadvantages of the traditional aging technology, such as lengthy time needed, high cost, etc., innovative aging technologies have been developed. These technologies involve aging wines using wood fragments, application of micro-oxygenation, aging on lees, or application of some physical methods. Moreover, wine bottling can be regarded as the second phase of wine aging and is essential for most wines. Each technology can benefit the aging process from different aspects. Traditional oak barrel aging technology is the oldest and widely accepted technology. The application of wood fragments and physical methods are promising in accelerating aging process artificially, while application of micro-oxygenation and lees is reliable to improve wine quality. This paper reviews recent developments of the wine aging technologies. The impacts of operational parameters of each technology on wine quality during aging are analyzed, and comparisons among these aging technologies are made. In addition, several strategies to produce high-quality wines in a short aging period are also proposed.     

Development of an antimicrobial material based on a nanocomposite cellulose acetate film for active food packaging

Nanocomposites based on biopolymers have been recognised as potential materials for the development of new ecofriendly food packaging. In addition, if these materials incorporate active substances in their structure, the potential applications are much higher. Therefore, this work was oriented to develop nanocomposites with antimicrobial activity based on cellulose acetate (CA), a commercial organoclay Cloisite30B (C30B), thymol (T) as natural antimicrobial component and tri-ethyl citrate (TEC) as plasticiser. Nanocomposites were prepared by a solvent casting method and consisted of 5% (w/w) of C30B, 5% (w/w) of TEC and variable content of T (0%, 0.5% and 2% w/w). To evaluate the effect of C30B into the CA matrix, CA films without this organoclay but with T were also prepared. All nanocomposites showed the intercalation of CA into the organoclay structure; furthermore this intercalation was favoured when 2% (w/w) of T was added to the nanocomposite. In spite of the observed intercalation, the presence of C30B inside the CA matrices increased the opacity of the films significantly. On the other hand, T showed a plasticiser effect on the thermal properties of CA nanocomposites decreasing glass transition, melting temperature and melting enthalpy. The presence of T in CA nanocomposites also allowed the control de Listeria innocua growth when these materials were placed in contact with this Gram-positive bacterium. Interestingly, antimicrobial activity was increased with the presence of C30B. Finally, studies on T release showed that the clay structure inside the CA matrix did not affect its release rate; however, this nanofiller affected the partition coefficient K_P/FS which was higher to CA nanocomposites films than in CA films without organoclay. The results obtained in the present study are really promising to be applied in the manufacture of food packaging materials.