The antimicrobial effect of wine on Listeria innocua in a model stomach system

A model stomach, containing a food matrix and a synthetic gastric fluid, was used to study the bactericidal effect of ingested wine on Listeria innocua. Volumes of wine equivalent to the ingestion of one glass and half a bottle, led, over a period of less than 2 h, to a reduction of 3 and 4 logarithmic cycles of the initial population respectively. The influence of ethanol and organic acids, wine constituents with known antimicrobial properties, was investigated. Ethanol exhibited a higher bactericidal effect than the mixture of the main wine organic acids. When testing the organic acids separately, malic and lactic acids were found to have the strongest effect. The combination of ethanol with the organic acids acted synergistically but to a lesser extent than wine itself. The results suggest that the ingestion of wine during a meal may diminish the quantity of Listeria persisting further in the alimentary tract.     

Hydrodechlorination of 3-chloropyridine and chlorobenzene in methanol solution over alkali-modified zirconia-supported palladium catalysts

The liquid-phase hydrodechlorination of 3-chloropyridine and chlorobenzene has been studied over alkali-modified zirconia-supported palladium catalysts. The modification of the ZrO₂ with alkali metal carbonates improves the catalytic activity of the final palladium catalyst. Therefore, the larger the ionic radii (Li⁺ < Na⁺ < K⁺), the greater the catalytic activity (TOF) of the palladium catalyst. For 3-chloropyridine, hydrodechlorination proceeds without catalyst deactivation. This is explained as the result of the interaction of reaction products (pyridine and HCl) forming pyridinium chloride, thus avoiding the detrimental effect of HCl on the palladium particles. Catalytic hydrodechlorination of chlorobenzene over Pd catalysts exhibits an initial catalytic activity (TOF) much lower than that of 3-chloropyridine and the Pd catalysts deactivate as the reaction proceeds. Finally, chlorobenzene hydrodehalogenation has also been carried out in the presence of an equimolecular amount of pyridine resulting in a decrease in the initial reaction rate on the one hand, but also in an increase in final conversion on the other.     

Hull-less Barley Varieties: Storage Proteins and Amino Acid Distribution in Relation to Nutritional Quality

Barley (Hordeum vulgare L.) has had an important impact on human nutrition. Hull-less barley is a genetically improved type that has been widely used in recent years. Six Brazilian hull-less barley varieties (IAC-IBON 214-82; IAC 8612-421; IAC 8501-31; IAC 8501-12; IAPAR 39-ACUMAI; IAC 8501-22) were analyzed for storage protein constituents, amino acid contents, and similarity among the hull-less barley varieties. Albumins, globulins, prolamins I and II, and glutelins were extracted and separated by SDS-PAGE. The total protein amino acid contents of the flour were also determined for each variety by TLC and HPLC. Variations in intensity and appearance and disappearance of protein bands were observed among the varieties suggesting genetic variability. However, the amino acid profile did not indicate any major variations in the amino acid concentrations. The high lysine and threonine total concentrations detected in the seeds of the hull-less barley varieties encouraged an investigation into the regulation of amino acid metabolism and storage protein synthesis.     

Thermodynamics of gas-solid flow

New thermodynamic fundamentals for vertical pneumatic conueying are proposed with derivation based strictly on mass conservation and continuum concept. For a 1-D, vertical, steady gas-solid flow, these new mass and energy balances allowed the derivation of a new nondimensional energy factor containing the pressure drop. This energy factor correlated quite well with the difference between the inlet gas velocity and solids terminal velocity, when tested against high-pressure, 15-m-high, vertical pneumatic transport data from Institute of Gas Technology. The energy factor was also checked against atmospheric-pressure data of the 5-m lift line of the Pennsylvania State Uniuersity. The new energy factor covers quite well both the atmospheric- and high-pressure sets of data (923 tests) including two heights, lean- and dense-phase transports, several pipe diameters, broad and narrow particle-size distributions, and different materials. The dissipation terms in gas-solid flow were also clearly identified.     

Transport of chromium(VI) through a Cyanex 921‐supported liquid membrane from HCl solutions

The transport of chromium(VI) through a flat‐sheet supported liquid membrane containing Cyanex 921 as a carrier has been investigated. The permeation of the metal is investigated as a function of various experimental variables: hydrodynamic conditions, concentration of chromium(VI) and HCl in the feed phase, carrier concentration and diluent in the membrane and strippant concentration in the stripping phase. The mass transfer coefficient and the thickness of the aqueous boundary layer were calculated from the experimental data. Furthermore, the selectivity of Cyanex 921‐based flat‐sheet supported liquid membrane towards different metal ions and the behaviour of the system against other carriers are presented. Copyright © 2003 Society of Chemical Industry     

Coupling GIS with Hydrologic and Hydraulic Flood Modelling

Geographic Information Systems (GIS) have been recognised as a powerful means to integrate and analyse data from various sources in the context of comprehensive floodplain management. As part of this comprehensive approach to floodplain management, it is very important to be able to predict the consequences of different scenarios in terms of flooded areas and associated risk. Hydrologic and hydraulic modelling plays a crucial role and there is much to gain in incorporating these modelling capabilities in GIS. This is still a rather complex task and research is being done on the full integration of these models. Interfacing between these models and GIS may be a very efficient way of overcoming the difficulties and getting very good results in terms of engineering practice. This paper presents results based on the use of Intergraph GIS coupled with Idrisi GIS. Using these two systems substantially increased the flexibility of using GIS as a tool for flood studies. A lumped (XSRAIN) and a distributed (OMEGA) hydrologic models were used to simulate flood hydrographs. The well known HEC-2 Hydraulic model was used to compute flooded areas. These models were applied in the Livramento catchment with very good results. The computation of flooded areas for different flood scenarios, and its representation in GIS, can be used in the assessment of affected property and associated damages. This is a very useful GIS-based approach to floodplain management.     

Temperature, thermal efficiency, and gradient performance from two seawater-SZ solar ponds

This paper presents 10 months of experience with two seawater-SZ (Storage Zone) solar ponds operated as a source of warm seawater which could have been used in an adjacent mariculture facility. Observations and extensive temperature, gradient and efficiency data are presented. This work demonstrated operation of and heat extraction from seawater-SZ solar ponds over a much longer interval than in previous work. It confirmed that seawater-SZ solar ponds can consistently give useful temperature elevations. A few phenomena not characteristic of conventional solar ponds were identified and are discussed.     

Epoxide polymerization

Summary Poly(propylene oxide), PPO, obtained using diphenylzinc, Ph₂Zn, and using the diphenylzinc-water system at various molar ratios H₂O/Ph₂Zn, were studied through ¹H NMR and IR spectroscopy establishing that the polymerization initiates by coordition of propylene oxide (PO) to a terminal zinc atom of the active species followed by consecutive insertions of PO units at this zinc atom. The PPO obtained showed Ph-and HO-, HO-and HO-end-groups depending on the molar ratio H₂O/Ph²Zn used, and also HO-and PhO-end-groups when oxygen was present in the polymerization system.