Hyperbranched polyglycerols,obtained from environmentally benign monomer,as reactive clays inhibitors for water‐based drilling fluids

To prevent the degradation of the borehole and also the disintegration and dispersion of drilled cuttings, different shale stabilizing additives are used in water‐based drilling fluids (WBFs). Glycols, poly(ethylene glycol), glycerols, and polyglycerol derivatives, also called polyols, have been used to inhibit shales containing reactive clays in WBF. These additives are normally used in conjunction with KCl to reduce clay swelling and dispersion of drilled cuttings. Highly branched polymers have become an important field in current polymer science. Such materials typically exhibit compact, globular structures in combination with an exceptionally high number of sites with functional groups. They have unique properties that differ significantly from their linear counterparts, and the hyperbranched polyglycerol (hPG) is an important hyperbranched polymer that can be produced from an environmentally benign monomer, the glycerol carbonate. In this article, the clay inhibitive properties of hPG were evaluated by different test methods including bentonite inhibition test, cuttings recovery, and X‐ray diffraction measurements. The results show that the hPG has a great potential to be used as an environmental friendly inhibitor additive in WBFs. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40384.     

Properties and weldability of plasticized polylactic acid films

The objectives of the presented work were to investigate films based on polylactic acid (PLA) and polyethylene glycol (PEG) in order to improve ductility and weldability of PLA films. The effect of plasticizer amount on the thermal, rheological, and mechanical properties of PLA plasticized films was investigated. The PEG content does affect the glass transition and the cold crystallization temperature of PLA in blends, while the melting temperature was not affected by the addition of PEG. The complex viscosity of the neat PLA granules and of plasticized films showed strong temperature and angular velocity dependence. The Young's modulus and tensile strength of plasticized films were improved with increasing plasticizer concentration, while the elongation at break stays rather constant. Plasticized PLA films were furthermore heat welded. These investigations showed that plasticized PLA films can be welded by heat welding. The obtained weld strength is strongly depending on the PEG amount as well as on selected welding parameters. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40394.     

Solvent-Assisted Crystallization of Fatty Acid Alkyl Esters from Animal Fat

An easy and efficient method for the separation of saturated and unsaturated fatty acid mono alkyl esters, prepared from animal fat, was developed. The most efficient separation was achieved by the use of solvents such as methanol and acetone at low temperatures. The dilution of the alkyl esters with 10 times the amount of solvent (10:1 v/w) and storage of the mixture for 4 h at ?22 °C could be defined as optimum conditions. After filtration of the saturated fraction at the corresponding temperature very pure fractions were obtained. For fatty acid methyl esters deriving from tallow, with an initial content of saturated fatty acids of almost 50 %, a saturated ester fraction with only 5 % unsaturated fatty acids and an unsaturated ester fraction with about 9 % of saturated fatty acids could be obtained. The solvent easily could be recovered by distillation. In addition fatty acid ethyl, 1‐propyl, 2‐propyl, 1‐butyl, tert‐butyl and 3‐methyl‐1‐butyl esters were prepared and separated into saturated and unsaturated fractions. All fractions were analyzed according to the fatty acid compositions and showed similar or slightly worse results compared to the methyl esters. The cold filter plugging points of the unsaturated fractions were measured, showing the lowest value for the unsaturated methyl ester fraction at ?26 °C. The fractionation with the use of solvents is an easy tool in order to obtain fatty acid alkyl esters with excellent cold temperature behavior out of animal fat.     

How Different Characterization Techniques Elucidate the Nature of the Gold Species in a Polycrystalline Au/TiO2 Catalyst

TiO₂‐supported gold species were prepared via the deposition‐precipitation route, with conservation of the initial speciation by freeze‐drying. The structural and electronic properties of the Au species were investigated by X‐ray absorption spectroscopy, electron microscopy, and IR spectroscopy of adsorbed CO in four states. Exclusively Au^III was deposited on the TiO₂ surface in patches ranging from isolated Au ions to three‐dimensional clusters. This paper illustrates in detail the unique contributions of all characterization techniques to this structural model.     

Effect of Constant‐Rate Reduction on the Performance of a Ternary Cu/ZnO/Al2O3 Catalyst in Methanol Synthesis

A multi‐functional flow set‐up was developed for the rate‐ and temperature‐controlled reduction of copper catalysts, their application in high‐pressure methanol synthesis and the determination of the copper surface area by N₂O frontal chromatography. The influence of constant‐rate reduction on the catalytic properties of a ternary Cu/ZnO/Al₂O₃ catalyst was investigated. The temperature during the constant‐rate reduction was found to decrease, indicating autocatalytic kinetics, but no significant catalytic effect of the milder reduction conditions was observed compared with a slow linear heating ramp.     

Development of a Technology for Online Measurement of Total and Water-Soluble Copper (Cu) in PM2.5

A novel monitor for online, in situ measurement of copper (Cu) in ambient fine and ultrafine particulate matter (PM) was developed based on a recent published high flow rate aerosol-into-liquid collector. This aerosol-into-liquid collector operates at 200 L/min flow and collects particles directly as highly concentrated slurry samples. The Cu concentration in slurry samples is subsequently determined by a cupric ion selective electrode (ISE). Laboratory tests were conducted to evaluate the performance of the cupric ISE. The calibration curve of the cupric ISE was determined using Cu(NO₃)₂ standard solutions prepared by serial dilution. As part of the evaluation, the effects of ionic strength, temperature and pH of the aerosol slurry sample on the cupric ISE measurement were also evaluated. The Cu measurement system performance was evaluated by collecting and measuring samples of lab-generated Cu(NO₃)₂ aerosols with known mass concentration. Overall, very good agreement between the theoretical and measured Cu concentrations was obtained, corroborating the excellent high overall collection efficiency and measurement accuracy of the Cu measurement system. Field evaluations of the online Cu monitor demonstrated very good agreement for total and water-soluble Cu concentrations with measurements performed by inductively coupled plasma mass spectrometry (ICP-MS), suggesting that interferences from other components of particulate matter are minimal under real world sampling conditions. Moreover, the field tests indicated that the new online Cu monitor could achieve near-continuous collection and measurements (at 2–4 h intervals) for at least 4 to 7 days without any obvious shortcomings in its operation. Both laboratory and field evaluations of the online Cu monitor indicate that it is an effective and valuable technology for PM collection and characterization of Cu in ambient aerosols and provides the foundation for the wider use of ISE for metal analysis and speciation of aerosols.

Copyright 2014 American Association for Aerosol Research     

Hydrogels containing silver nanoparticles for burn wounds show antimicrobial activity without cytotoxicity

This research introduces a novel dressing for burn wounds, containing silver nanoparticles in hydrogels for infected burn care. The 2‐acrylamido‐2‐methylpropane sulfonic acid sodium salt hydrogels containing silver nanoparticles have been prepared via ultraviolet radiation. The formation of silver nanoparticles was monitored by surface plasmon bands and transmission electron microscopy. The concentration of silver nitrate loaded in the solutions slightly affected the physical properties and mechanical properties of the neat hydrogel. An indirect cytotoxicity study found that none of the hydrogels were toxic to tested cell lines. The measurement of cumulative release of silver indicated that 70%–82% of silver was released within 72 hr. The antibacterial activities of the hydrogels against common burn pathogens were studied and the results showed that 5 mM silver hydrogel had the greatest inhibitory activity. The results support its use as a potential burn wound dressing. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40215.