Iridoid glycoside metabolism and sequestration byPoladryas minuta (Lepidoptera: Nymphalidae) feeding onPenstemon virgatus (Scrophulariaceae)

A bivoltine checkerspot butterfly,Poladryas minuta, is aPenstemon specialist, not known to utilize any other plant genus for oviposition and larval feeding. At several intermontane plains sites of central Colorado, the butterfly utilizesPenstemon virgatus as its sole host plant. Analysis of the host plant showed it to contain three cinnamyl-type catalpol esters (scutellarioside-II, globularin, globularicisin) and catalpol. The host plant contained an average of 10% dry weight iridoids, but some variation among individual plants and leaves within plants was noted. Field-collected butterflies contained 2.1–8.7% dry weight catalpol, but no other iridoids. Adults from larvae fedP. virgatus in the lab contained 4.2–9.0% dry weight catalpol and excreted large amounts of catalpol in the meconium. No catalpol was found in the larval frass. Larvae did not consume three alternate iridoid-containing host-plant species, and most eventually died rather than feed on the alternate plants. Larvae did consume small amounts of artificial diets containing the alternate species andP. virgatus, but most went into diapause and some died. Survival was good on artificial diet containing 10% dry weight of the iridoid esters fromP. virgatus. Only catalpol was found in pupae and adults, but it was absent from the larval frass. The cinnamic-type acids expected from larval hydrolysis of the esters were not found in larval frass, pupae, or adults. These results are contrasted with those found for another checkerspot,Euphydryas anicia, which consumes a different host-plant species but was present at one of the same sites withPoladryas minuta.Paper 15 in the series Chemistry of the Scrophulariaceae. Paper 14 Boros, C.M., Stermitz, F.R., and Harris, G.H. 1990.J. Nat. Prod. 5372–80.     

IMAGING OF PARTICLE MOTION IN FLUID-SOLID SYSTEMS USING A GAMMA CAMERA

A new approach is presented for the characterization of particle motion in fluid-solid systems based on dynamic imaging with a gamma scintillation camera. A two-dimensional spouted bed of 200-500 micron diameter anion exchange resin beads was used as a test system. One or several beads were radiolabeled with the 140 keV gamma emitting radionuclide 99m-Tc pertechnetate, and particle velocity, panicle path, the spatial distribution of particle residence times, and local bed density were determined from the measured temporal and spatial distributions of particle activity. While care must be exercised in the interpretation of data when the scale for changes in the spatial distribution of activity approaches the limits of camera resolution, the method is quantitative, non-invasive, and well suited to the study of systems having symmetry in one spatial dimension.     

Mechanical Behavior of Several Hybrid Ceramic-Matrix-Composite Laminates

Several different hybrid laminated composites comprised of alternating layers of dense ceramic sheets (either SiC or Si₃N₄) and fiber-reinforced ceramic-matrix-composite (CMC) layers (Nicalon fibers with either glass or glass-ceramic matrices) have been fabricated and characterized. The effects of the reinforcement architecture (unidirectional vs cross-ply) and the relative volume fractions of the phases on the tensile and flexural properties have been examined. Comparisons have been made with the properties of the constituent layers. Rudimentary models have been developed to describe the onset of cracking and for the minimum volume fraction of CMC required to develop multiple cracks and thus obtain a high failure strain.     

Preparation and characterization of a number of amine salts of long-chain fatty acids

Summary Eighty-eight amine salts of long-chain fatty acids have been prepared, purified by solvent crystallization, and characterized. Forty-five of these were salts of palmitic acid. The rest included salts of capric, lauric, myristic, stearic, oleic, elaidic, and 12-hydroxystearic acids. A variety of aliphatic, aromatic, and heterocyclic amines, including primary, secondary, and tertiary amines, were investigated. The majority of these gave 1∶1 acid-amine compounds on solvent recrystallization of an equimolar mixture of acid and amine. Some of the amines gave no crystallizable salt, and with others the pure salt could not be obtained by this procedure. Under the same conditions the symmetrical alkyl, substituted alkyl, and aralkyl secondary amines investigated gave crystallizable compounds containg two molecules of fatty acid to one of amine. Molecular compounds of 2-aminopyridine with four molecules of saturated fatty acid were formed by recrystallization starting with a 1 to 4 amine-acid mixture. Surface-tension measurements were made for aqueous solutions of a few of the amine salts. One of the laboratories of the Southern Utilization Research and Development Division, Agricultural Research Service, U. S. Department of Agriculture.     

Fatty acid morpholides as plasticizers for vinyl chloride resins. III. Ternary compatibility-composition diagrams for the oleic-linoleic-stearic and oleic-linoleic-palmitic systems

A systematic investigation has been made of the effect of fatty acid composition on the compatibility of the corresponding mixed morpholides as plasticizers for vinyl chloride-vinyl acetate copolymer resins. Plasticizer evaluation data were obtained for the morpholides of lauric, palmitic, elaidic, and epoxyoleic acids and compared with the literature values for other fatty acid morpholides and morpholide mixtures. Ternary compatibility-composition diagrams have been constructured for the oleic-linoleic-stearic and the oleic-linoleic-palmitic morpholide systems. These diagrams make it possible to predict what adjustment, if any, must be made in the composition of any mixture of these fatty acids so that the corresponding morpholide mixture will be compatible. The diagrams will be useful in selecting the most appropriate and economical fatty acid sources from which to make compatible morpholide mixtures. Presented at the 52nd Annual Meeting, American Oil Chemists’ Society, St. Louis, Mo., May 1–3, 1961. One of the laboratories of the Southern Utilization Research and Development Division, Agricultural Research Service, U.S. Department of Agriculture.     

Carbon fiber structure and stability studies

A study has been made of the thermal-oxidative stability of several commercially available carbon fibers. Significant differences in the weight loss behavior were observed in air aging studies run on the bare fibers at 600°F (589 K). The stability of high temperature laminates, such as those based on NR-150 polyimide precursor solutions, was found to be directly affected by the stability of the reinforcing carbon fibers. In studies carried out to determine the reasons for carbon fiber instability, residual sodium sulfate was found to be the principle destabilizing factor. A mechanism whereby the sodium sulfate promotes the oxidation of carbon in the presence of air is proposed.     

Studies of microhardness and mar resistance using a scanning probe microscope

Scanning probe microscopy (SPM) is in a period of rapid development. It shows great promise for characterizing coating surfaces. This paper describes modification of an SPM so that it can be used to mar the surfaces of coatings under controlled conditions and to characterize the mars. Mar resistance of coatings is analyzed in terms of a ‘three response, two mechanism model.' The three responses (fracture, elastic, and plastic) can be measured quantitatively using the SPM. Of the three responses, only two (fracture and plastic deformation) are marring mechanisms – elastic deformations recover instantaneously. In some cases mars resulting from plastic deformation may recover slowly with time or with immersion in water; this phenomenon is attributed to viscoelastic creep. Microhardness is also measured with the modified SPM. Some thermoset coatings appear to be substantially harder near their surfaces than in the mass of material, and such materials may respond quite differently to stress applied at different levels near the surface. This finding has important implications for all coating properties that are strongly influenced by the surface. A quantity called ‘micro mar resistance' is defined. It may be useful for comparing different coatings under specified conditions of marring. However, there can be no single quantity that expresses ‘mar resistance' of a coating under all conditions.     

From a theoretical model to a predictive simulation model of operator interaction with support systems: designing experiments to build the numerical simulation

In this paper, we will discuss a methodology developed and applied in the European ITERATE project with the objective of designing experiments that will provide data to seed the numerical model of operator behaviour in different surface transport modes: road vehicles, rail transport and ships. The experiments aim to investigate how new technologies support different types of operators in different contexts. A structured approach was adopted. Firstly, an initial selection of the systems to be investigated was made, describing the support they provide for operators. Hypotheses were formulated on the effects of operator parameters on the interaction with the systems. A final selection of systems for the experiments was made, focusing on systems providing support for collision avoidance and speed management. The operator parameters (culture, attitude and personality, experience, driver state (such as fatigue) and the demands of the task) were operationalised and piloted. The next step was the development of scenarios to be implemented in a driving simulator. In the last step, the final experiments were designed and detailed.     

Oxidation of pyrite in coal to magnetite

When bituminous coal is heated in an inert atmosphere (He) containing small amounts of oxygen at 393–455 °C, pyrite (FeS₂) in coal is partially converted to magnetite (Fe₃0₄). The maximum amount of Fe₃0₄ formed during the time of heating corresponds to 5–20% of the total pyrite present, depending on the coal sample. The magnetite forms as an outer crust on the pyrite grains. The fact that the magnetic properties of the pyrite grains are substantially increased by the magnetite crust suggests that pyrite can be separated from coal by use of a low magnetic field. In a laboratory test, 75% removal is obtained by means of a 500 Oe magnet on three samples, and 60% on a fourth sample.