Male european corn borer,Ostrinia nubilalis (Hübner), antennal responses to analogs of its sex pheromone

Experiments were conducted to (1) determine whether the electroantennogram (EAG) can detect differences among the responses of antennae from males derived from the three strains ofOstrinia nubilalis (Hübner), and (2) characterize the EAG responses of each strain to isomeric forms of the natural pheromone, (E)- and (Z)-11-tetradecen-1-ol acetate (TDA), and analogs possessing differences in the terminal alkyl group, cyclopropyl (CPA), ortert-butyl (TBA).EAG responses differed among the strains in two ways: (1) Antennae fromZZ males always produced an EAG to (Z)-TDA with an extended duration of response. This signature EAG response was found to be unique to the antennal response ofZZ males to (Z)-TDA, thus providing a relatively easy method of distinguishing liveZZ males fromEE orZE males. Correlated with this longer EAG response was a longer disadaptation time, i.e., the EAG response ofZZ antennae disadapted more slowly (ca. 10 min) than the response ofEE antennae. (2) Strain differences in the relative EAG amplitudes to isomers and analogs were observed at the stimulus amounts eliciting the peak EAG amplitude as follows: TDA CPA > TBA forZZ males and both isomers; TDA > CPA TBA and CPA TDA > TBA forEE males and theE andZ isomers, respectively; CPA > TBA TDA forZE males and both isomers. Dose—response relationships were seen for all compounds if amplitude (peak height) of the EAG was used as a measure of response. However, if width of the EAG at half the peak height (peak width) was used, then only theZZ antennal response to (Z)-TDA resulted in a meaningful dose-response relationship. For all strains, the EAG amplitudes elicited by theZ isomers of any of the tested compounds were greater than those elicited by the correspondingE isomers. Therefore, correlations between the relative EAG and upwind flight responses were observed in theZZ (r = 0.86) andZE (r = 0.80) strains but were not correlated in theEE strain (r = 0.18). Temporal studies showed that adaptation, not postexcision deterioration, was responsible for the observed decreases in the EAG amplitude after repetitive stimulation or after stimulation with amounts in a descending order. Disa-daptation required at least 20 min for a moderate dose (10 g for 1 sec). Developmental studies showed that antennae from 2-day-old adults had the greatest EAG response.     

Liquid crystalline acrylic copolymers for high-solids enamel coatings

Carboxyl functional liquid crystalline (LC) acrylic copolymers were synthesized and were compared with carboxyl functional control copolymers of M?_n about 5000–15,000. Both types were crosslinked with a hexakismethoxymethyl melamine (HMMM) resin at 150°C, a temperature below the clearing points of the LC copolymers. Birefringent phases were visible in the crosslinked films made from LC polymers. FT-IR indicated the presence of unreacted COOH in all crosslinked materials. Unreacted COOH groups in crosslinked LC copolymers appeared only slightly higher than those in crosslinked amorphous copolymers. The potential utility of these LC copolymers as binders for thermosetting coatings was assessed. Variables studied were HMMM content, the length of PHBA grafts, T_g and M?_n of the acrylic copolymer backbone, and functionality. Optimum LC copolymers have low backbone T_g (<O°C) and low functionality (< 7.5 mol %). Cured films of such copolymers have both high hardness (> 35 KHN), high impact resistance (> 80 in. ib), excellent adhesion, and good solvent resistance.     

Thermal stability of substituted phenol-formaldehyde resins

A variety of crosslinked phenol-, or derivatized phenol-formaldehyde polymers have been synthesized. The phenol derivatives included o- and p-cresol, p-nonylphenol, m-pentadecylphenol, and raw and distilled cashew nutshell liquid. The derivatives were copolymerized with phenol and formaldehyde using sulfuric acid as catalyst to yield novolak-type prepolymers, which were then cured with hexamethylenetetramine. Thermogravimetric analysis was used to evaluate the thermal stability of the cured resins. It was found that the thermal stability of the resins decreased with increasing amounts of cashew nutshell liquid, with distilled cashew resins being slightly more thermally stable than raw cashew resins. The thermal stability of resins containing substituted phenols with alkyl chains was observed to increase from n-pentadecylphenol to cresol to phenol. The trend in thermal stability of the resins may be explained on the basis of alkyl groups being less thermally stable than aromatic rings. The amount of hexamethylenetetramine used to cure the prepolymers also influences the thermal stability of the resins. It appears that a level of 10 to 15% hexamethylenetetramine maximizes the thermal stability of the resin.     

Barium Metaplumbate Ceramic Electrodes for Ceramic Capacitors

A novel approach to reduce electrode costs in ceramic capacitors is presented. Barium metaplumbate (BaPbO₃) was fired onto sintered commercial (Ba, Sr)TiO₃ disk capacitors as external electrodes. Samples were compared to disk capacitors of the same composition with electrodes made of sputtered gold and air-dried silver. The ceramic electrode led to substantial changes in the insulation resistance and dc breakdown strengths, but other properties remained the same. The feasibility of using BaPbO₃ electrodes strongly depends on chemical reactions between the electrode and dielectric.     

Synthesis and photo-induced solution properties of new rigid-rod polyimides

A series of new, substituted pyromellitic dianhydrides were synthesized from 1,2,4,5-tetramethylbenzene. New soluble rigid-rod polyimides were obtained from the dianhydrides and 2,2′-bis(trifluoromethyl)-4,4′-biphenyl (PFMB) in phenolic solvents in the presence of isoquinoline as a catalyst. The polyimides are soluble in N-methyl-2-pyrrolidone (NMP), N,N-dimethylacetamide (DMAc), m-cresol and other solvents, in spite of having no bending in their rigid structures.

UV irradiation changed color of the polyimide solutions and also their viscosity. We observed new absorbance in the 700-nm region and an ESR signal by UV irradiation. The new visible absorbance and the ESR signal are derived from the same origin. They are attributed to the anion radical of the diimide moiety in the polyimide as deduced from the hyper fine structure of the ESR signal. In addition, UV irradiation diminishes the solution viscosity.     

Polymerization Catalysis in Liquid Propylene: High Activities and Molecular Weights in Propylene/CO Copolymerization Reactions

Summary: The dicationic [(dppp)Pd(NCCH₃)₂](BF₄)₂ catalyst (dppp = 1,3‐bis(diphenylphosphino)propane) was applied in a liquid monomer, two phase process for the CO/propene copolymerization reaction. For the first time it was possible to synthesize propene/CO copolymers with an activity up to 7 500 g/(mol · h) and molecular weights of 500 000 g/mol. Activities up to 40 000 g/(mol · h) could be obtained with the use of the unsymmetric catalyst [(CF₃‐dppp)Pd(NCCH₃)](BF₄)₂ (CF₃‐dppp = 1‐diphenylphosphino‐3‐bis[3,5‐di(trifluormethyl)phenyl]phosphinopropane) in homogeneous liquid propene solution.

Granules found after copolymerization.     

Automatic detection of depth of cut during end milling operation using acoustic emission sensor

Any shortfall in the required depth during milling machining can affect the dimensional accuracy of the part produced and can cause a catastrophic failure to the machine. Corrective remedies to fix the dimensions inaccuracy will increase the machining time and costs. In this work, a depth-of-cut monitoring system was proposed to detect depth of cut in real time using an acoustic emission sensor and prediction model. The characteristics of the sensor signal obtained in machining processes can be complex in terms of both nonlinearity and nonstationarity. To overcome this complexity, a regression model and an artificial neural network model were used to represent the relationship between the acoustic emission signal and the depth of cut. The model was tested under different machining cases and found to be efficient in predicting the depth of cut.     

Adaptive augmented Lagrangian methods: algorithms and practical numerical experience

In this paper, we consider augmented Lagrangian (AL) algorithms for solving large-scale nonlinear optimization problems that execute adaptive strategies for updating the penalty parameter. Our work is motivated by the recently proposed adaptive AL trust region method by Curtis et al. [An adaptive augmented Lagrangian method for large-scale constrained optimization, Math. Program. 152 (2015), pp. 201–245.]. The first focal point of this paper is a new variant of the approach that employs a line search rather than a trust region strategy, where a critical algorithmic feature for the line search strategy is the use of convexified piecewise quadratic models of the AL function for computing the search directions. We prove global convergence guarantees for our line search algorithm that are on par with those for the previously proposed trust region method. A second focal point of this paper is the practical performance of the line search and trust region algorithm variants in Matlab software, as well as that of an adaptive penalty parameter updating strategy incorporated into the Lancelot software. We test these methods on problems from the CUTEst and COPS collections, as well as on challenging test problems related to optimal power flow. Our numerical experience suggests that the adaptive algorithms outperform traditional AL methods in terms of efficiency and reliability. As with traditional AL algorithms, the adaptive methods are matrix-free and thus represent a viable option for solving large-scale problems.     

A deep bidirectional LSTM approach for video-realistic talking head

This paper proposes a deep bidirectional long short-term memory approach in modeling the long contextual, nonlinear mapping between audio and visual streams for video-realistic talking head. In training stage, an audio-visual stereo database is firstly recorded as a subject talking to a camera. The audio streams are converted into acoustic feature, i.e. Mel-Frequency Cepstrum Coefficients (MFCCs), and their textual labels are also extracted. The visual streams, in particular, the lower face region, are compactly represented by active appearance model (AAM) parameters by which the shape and texture variations can be jointly modeled. Given pairs of the audio and visual parameter sequence, a DBLSTM model is trained to learn the sequence mapping from audio to visual space. For any unseen speech audio, whether it is original recorded or synthesized by text-to-speech (TTS), the trained DBLSTM model can predict a convincing AAM parameter trajectory for the lower face animation. To further improve the realism of the proposed talking head, the trajectory tiling method is adopted to use the DBLSTM predicted AAM trajectory as a guide to select a smooth real sample image sequence from the recorded database. We then stitch the selected lower face image sequence back to a background face video of the same subject, resulting in a video-realistic talking head. Experimental results show that the proposed DBLSTM approach outperforms the existing HMM-based approach in both objective and subjective evaluations.