Numerische Simulation der Faserbewegung beim Strangpressen kurzfaserverstärkter Glasschmelzen

Numerical Simulation of the Fibre-Motion during the Extrusion of Short-Fibre-Reinforced Glass-Melts Fibre-reinforced materials are characterized by an anisotropic behaviour of the mechanical properties, which is caused by the alignment of the embedded fibres. In the case of short-fibre-compounds this behaviour is strongly influenced by the mechanism of flow during the manufacturing process. Numerical simulation Methods are preferentially used to get informations about the orientation of the reinforced fibres at the end of the molding-process and to improve the properties of the compound. For that, a model is developed, which calculates the motion of the short-fibres in the area of flow, basing on a three-dimensional finite-element-computation. Thereby the interaction between the Particular fibres during the orientation process is considered by using an interaction coefficient. Examplified at the extrusion of short fibre reinforced glass-melts, the fibre orientation is determined at models with different geometries of the pressing tool and variable boundary conditions. This procedure allows to determine the influence of the process-parameters On the expected quality of the composite. The represented simulation-model can also be used for other molding- and extrusion-processes of fibre reinforced materials.     

Estimation of sampling error variance in the meta-analysis of correlations: Use of average correlation in the homogeneous case.

The estimate of the population correlation used in the formula for sampling error variance of a correlation is typically the observed correlation, but in meta-analysis the average of the observed correlations can be used. For the case in which there is no variation in the study population correlations or sample sizes and the number of studies is very large, the authors found that use of the average correlation estimator is more accurate than use of the traditional, individual correlation estimator, except in those rare cases in which the uncorrected population correlation is greater than .60. For typical sample sizes, when the uncorrected population correlation is between -.40 and .40, there is virtually no error in the meta-analysis credibility interval based on the average correlation estimator. On the other hand, the amount of the error in the individual correlation estimator is qualitatively important if the sample is 25 or less and the population correlation is less than .40. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Does marital conflict cause child maladjustment? Directions and challenges for longitudinal research.

Although the association between marital conflict and child adjustment problems has been well documented, there is no empirical evidence that conflict actually causes maladjustment. The investigation of causation requires theoretically and empirically informed longitudinal research. Two topics are addressed to facilitate such research. First, how marital conflict may lead to adjustment problems is outlined, with a focus on constructs that are likely to be critical to any theory on this topic. Second, several issues are identified that need to be addressed in longitudinal research on the mechanisms underlying the link between marital and child problems. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Ermüdungsverhalten und Dauerfestigkeit von Graphit und Aluminium – infiltriertem Graphit

Fatigue behaviour and endurance limit of graphite and of aluminium‐infiltrated graphite Fatigue properties of polycrystalline, isotropic graphite FU2590 and of FU2590 infiltrated with AlSi7Mg (FU2590/AlSi7Mg) were investigated in reversed bending tests at 25 Hz at numbers of cycles below 10⁷ and in tension‐compression tests at 20 kHz below 10⁹ cycles. The open porosity of Graphite (10‐11 Vol.‐%) was infiltrated with the aluminium alloy using the squeeze casting infiltration method, which led to an increase of the bending strength by 50 %, increase of tensile strength by 30 % and increase of stiffness by 15 %. Fully reversed tension‐compression loading of FU2590 delivers a mean endurance limit at 10⁹ cycles at the normalized maximum stresses (i.e. maximum tension stress of a cycle divided by the static strength) of 0,65±0,03. Mean numbers of cycles to failure of 10⁴ were found in fully reversed bending tests at the normalized maximum stress of 0,78. The infiltrated material shows approximately 30 % higher cyclic strength in reversed bending tests, and the mean endurance limit under tension compression loading increases by 15 %. The increased endurance limit of the infiltrated material is caused by the increased stiffness. The increased toughness of graphite due to the infiltration with aluminium is of additional beneficial influence at the higher cyclic stresses investigated in reversed bending tests and in static tests.     

Two studies of the long-term follow-up of minimal therapist contact treatments of vascular and tension headache.

Tension and vascular headache patients, initially treated with biofeedback and/or relaxation training in either a minimal therapist contact protocol (3 visits) or an intensive individual protocol (10 or 16 visits) were followed-up prospectively for 2 years. In the first study, for the first 6 months of follow-up, half of all patients continued to keep headache diaries and were seen monthly and the other half had only minimal contact. The results at 1-year follow-up, based on 4 weeks of daily headache diaries, revealed equally good maintenance from both treatment protocols and from both follow-up conditions. In Study 2, we found that patients remained improved over pretreatment baseline levels at the 2-year follow-up regardless of initial treatment intensity. Approximately three quarters of vascular patients who were initially improved at posttreatment remained improved at 2 years. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Converting interpreters into compilers

There is an effective and quite general method of manually deriving compilers from programming-language interpreters without dealing directly with machine language. The method is an implementation of the largely theoretical and under-appreciated concept of partial computation, but can be understood on its own terms. It involves the translation of a source program's intermediate form into the interpreter's implementation language. This paper shows how the method can be used to transform both a sample iterative interpreter and a sample recursive interpreter into compilers. The result can be a large gain in program execution speed. Other advantages of the method, including the ease and practicality of applying it, are discussed.     

A Micellar Route to Ordered Arrays of Magnetic Nanoparticles: From Size‐Selected Pure Cobalt Dots to Cobalt–Cobalt Oxide Core–Shell Systems

Starting with Co‐salt‐loaded inverse micelles, which form if the diblock copolymer polystyrene‐block‐poly(2‐vinylpyridine) is dissolved in a selective solvent like toluene and CoCl₂ is added to the solution, monomicellar arrays of such micelles exhibiting a significant hexagonal order can be prepared on top of various substrates with tailored intermicellar distances and structure heights. In order to remove the polymer matrix and to finally obtain arrays of pure Co nanoparticles, the micelles are first exposed to an oxygen plasma, followed by a treatment in a hydrogen plasma. Applying in‐situ X‐ray photoelectron spectroscopy, it is demonstrated that: 1) The oxygen plasma completely removes the polymer, though conserving the original order of the micellar array. Furthermore, the resulting nanoparticles are entirely oxidized with a chemical shift of the Co 2p_3/2 line pointing to the formation of Co₃O₄. 2) By the subsequent hydrogen plasma treatment the nanoparticles are fully reduced to metallic Co. 3) By exposing the pure Co nanoparticles for 100 s to various oxygen partial pressures pequation/tex2gif-inf-5.gif, a stepwise oxidation is observed with a still metallic Co core surrounded by an oxide shell. The data allow the extraction of the thickness of the oxide shell as a function of the total exposure to oxygen (pequation/tex2gif-inf-7.gif × time), thus giving the opportunity to control the ferromagnetic–antiferromagnetic composition of an exchange‐biased magnetic system.