Translation of segment scale stiffening into macroscale reinforcement in polymer nanocomposites

Structuring of polymer nanocomposites (PNCs) with an aid of relatively weak external magnetic fields has been studied as a method for control of the nano- and microstructure. Magnetic nanoparticles (NPs) were assembled into high aspect ratio one-dimensional strings and unidirectionally oriented with the magnetic field (B = 0–50 mT) within the photopolymer matrix. The effect of the anisotropic MNPs assemblies on the mechanical properties was studied over a wide temperature range for the first time. The impact of various reinforcing mechanisms was distinguished with respect to the position of the glass transition temperature (T_g). The reinforcing effect exhibits temperature dependency with a maximum ~65°C above the glass transition and only negligible effect below the T_g. In addition, significant directional anisotropy of stiffness was observed. Composite micromechanics was applied to interpret the orientation and size-dependent reinforcement of PNCs, and temperature-dependent stiffness of the polymer-MNP structures was quantified. The presence of polymer chains with altered dynamics surrounding the MNPs inside the anisotropic assemblies was proposed to be an essential nanoscale mechanism mediating the stress transfer and contributing to mechanical robustness of the hybrid structures and PNCs. POLYM. ENG. SCI., 60:587–596, 2020. © 2019 Society of Plastics Engineers     

Failure analysis of thermally cycled columnar thermal barrier coatings produced by high-velocity-air fuel and axial-suspension-plasma spraying: A design perspective

Axial-suspension-plasma spraying (ASPS) is a fairly recent thermal spray technology which enables production of ceramic top coats in TBCs, incorporating simultaneously the properties of both the conventional-plasma sprayed (highly insulating porous structures) and electron-beam-physical-vapor-deposited (strain-tolerant columnar structures) top coats. TBCs are required to insulate the hot components in a gas turbine engine against high temperature and harsh operating conditions. Periodic heating and cooling of turbine engines during operation can create severe thermal cyclic fatigue conditions which can degrade the performance of these coatings eventually leading to the failure. An in-depth experimental investigation was performed to understand the failure behavior of columnar TBCs subjected to thermal cyclic fatigue (TCF) test at 1100?C. The study revealed that the TCF performance was influenced to an extent, by the top coat microstructure, but was primarily affected by the severity of thermally grown oxide (TGO) growth at the bond coat-top coat interface. Mixed failure modes comprising crack propagation through the bond coat-TGO interface, through TGO and within the top coat were identified. Based on the analysis of the experimental results and thorough discussion a novel design of microstructure for the high TCF performance columnar TBC is proposed.     

Revisiting Steroidogenic Pathways in the Human Placenta and Primary Human Trophoblast Cells

Steroid hormones play a crucial role in supporting a successful pregnancy and ensuring proper fetal development. The placenta is one of the principal tissues in steroid production and metabolism, expressing a vast range of steroidogenic enzymes. Nevertheless, a comprehensive characterization of steroidogenic pathways in the human placenta and potential developmental changes occurring during gestation are poorly understood. Furthermore, the specific contribution of trophoblast cells in steroid release is largely unknown. Thus, this study aimed to (i) identify gestational age-dependent changes in the gene expression of key steroidogenic enzymes and (ii) explore the role of trophoblast cells in steroid biosynthesis and metabolism. Quantitative and Droplet Digital PCR analysis of 12 selected enzymes was carried out in the first trimester (n = 13) and term (n = 20) human placentas. Primary trophoblast cells (n = 5) isolated from human term placentas and choriocarcinoma-derived cell lines (BeWo, BeWo b30 clone, and JEG-3) were further screened for gene expression of enzymes involved in placental synthesis/metabolism of steroids. Finally, de novo steroid synthesis by primary human trophoblasts was evaluated, highlighting the functional activity of steroidogenic enzymes in these cells. Collectively, we provide insights into the expression patterns of steroidogenic enzymes as a function of gestational age and delineate the cellular origin of steroidogenesis in the human placenta.     

Laser Clad and HVOF-Sprayed Stellite 6 Coating in Chlorine-Rich Environment with KCl at 700 °C

Laser clads and HVOF coatings from a stellite 6 alloy (Co–Cr–W–C alloy) on 304 stainless steel substrates were exposed both bare and with KCl deposits in 500 ppm HCl with 5% O₂ for 250 h at 700 °C. SEM/EDX and PXRD analyses with Rietveld refinement were used for assessment of the attack and for analysis of the scales. The bare samples suffered from scale spallation and the scale was mostly composed of Cr₂O₃, CoCr₂O₄ and CoO, although due to dilution haematite (Fe₂O₃) was detected in the scale formed on the laser clad sample. A small amount of hydrated HCl was detected in bare samples. While the corrosion of the bare surfaces was limited to comparatively shallow depths and manifested by η and M₇C₃ carbide formation, the presence of KCl on the surface led to severe Cr depletion from the HVOF coating (to 1 wt%). Both inward and outward diffusion of elements occurred in the HVOF coating resulting in Kirdendall voids at the coating–steel interface. The laser clad sample performed significantly better in conditions of the KCl-deposit-induced corrosion. In addition to the oxides, CoCl₂ was detected in the HVOF sample and K₃CrO₄ was detected in the laser clad sample. Thermodynamic calculations and kinetic simulations were carried out to interpret the oxidation and diffusion behaviours of coatings.     

Monitoring the mycotoxins in food and their biomarkers in the Czech Republic

Testing of the presence of toxigenic microfungi and mycotoxins in foodstuffs in the food chain is an important part of the food safety strategy in The Czech Republic. At the national level, control of their presence in the entire food chain is assured by Public Health Protection Agencies, by the Veterinary Administration and by the Czech Agriculture and Food Inspection Authority. This article summarizes surveillance activities of Public Health Protection Agencies and mycotoxins findings in dietary raw materials and foodstuffs from the 1990s to 2004 in the Czech Republic. At present, the health risk from the mycotoxins exposure from foodstuffs is assessed to be relatively low in the Czech Republic, especially as far as the foodstuffs of the Czech origin are concerned. It may result in late toxic effects (e. g., carcinogenic risk) following a single or repeated ingestion of low mycotoxins doses from foodstuffs. Nevertheless, the overall situation may change due to the globalization of the food market. In order to minimize the risk associated with mycotoxins and eliminate their impact on Czech public health, continuous monitoring of the presence of toxigenic moulds, mycotoxins, and their biomarkers is necessary, in conjunction with strict respect to European Union legislation.     

Timber steel-fibre-reinforced concrete floor slabs subjected to fire

This paper presents a finite element model (FE model) for a numerical analysis of a composite steel-fibre-reinforced concrete (SFRC) slab with unprotected secondary timber beams subjected to fire, taking tensile membrane action into account. The material models were calibrated by material tests and push-out tests in a preliminary study, and then the FE model was validated against the results of a full-scale furnace test. The validated FE model takes into account geometric and material nonlinearity, mechanical damage due to thermal loading, and the nonlinear connection between the SFRC slab and the timber beams. A new material model was created to improve the simulated behaviour of the SFRC, especially in tension. The validated FE model was supplemented by a semi-probabilistic safety concept based on the Eurocode standards, and was applied to define the fire resistance of different variants of timber SFRC flooring subjected to fire with various slab dimensions and design loads. This approach will be used to create a catalogue in which the fire resistance will be defined for specific parameters of the structure, for example dimensions, loads and materials. The research presented in this paper follows up on a previous study, which was presented in 2014.     

Hyperbilirubinemia Maintained by Chronic Supplementation of Unconjugated Bilirubin Improves the Clinical Course of Experimental Autoimmune Arthritis

Rheumatoid arthritis (RA) is a chronic multisystem disease, therapy of which remains a challenge for basic research. The present work examined the effect of unconjugated bilirubin (UCB) administration in adjuvant-induced arthritis (AIA)—an experimental model, in which oxidative stress (OS), inflammation and inadequate immune response are often similar to RA. Male Lewis rats were randomized into groups: CO—control, AIA—untreated adjuvant-induced arthritis, AIA-BIL—adjuvant-induced arthritis administrated UCB, CO-BIL—control with administrated UCB. UCB was administered intraperitoneally 200 mg/kg of body weight daily from 14th day of the experiment, when clinical signs of the disease are fully manifested, to 28th day, the end of the experiment. AIA was induced by a single intradermal immunization at the base of the tail with suspension of Mycobacterium butyricum in incomplete Freund’s adjuvant. Clinical, hematologic, biochemical and histologic examinations were performed. UCB administration to animals with AIA lead to a significant decrease in hind paws volume, plasma levels of C-reactive protein (CRP) and ceruloplasmin, drop of leukocytes, lymphocytes, erythrocytes, hemoglobin and an increase in platelet count. UCB administration caused significantly lowered oxidative damage to DNA in arthritic animals, whereas in healthy controls it induced considerable oxidative damage to DNA. UCB administration also induced atrophy of the spleen and thymus in AIA and CO animals comparing to untreated animals. Histological signs of joint damage assessed by neutrophils infiltration and deposition of fibrin were significantly reduced by UCB administration. The effects of exogenously administered UCB to the animals with adjuvant-induced arthritis might be identified as therapeutic, in contrast to the effects of UCB administration in healthy animals rather classified as toxic.     

Contactless conductivity detector for microchip capillary electrophoresis

A microfabricated electrophoresis chip with an integrated contactless conductivity detection system is described. The new contactless conductivity microchip detector is based on placing two planar sensing aluminum film electrodes on the outer side of a poly(methyl methacrylate) (PMMA) microchip (without contacting the solution) and measuring the impedance of the solution in the separation channel. The contactless route obviates problems (e.g., fouling, unwanted reactions) associated with the electrode-solution contact, offers isolation of the detection system from high separation fields, does not compromise the separation efficiency, and greatly simplifies the detector fabrication. Relevant experimental variables, such as the frequency and amplitude of the applied ac voltage or the separation voltage, were examined and optimized. The detector performance was illustrated by the separation of potassium, sodium, barium, and lithium cations and the chloride, sulfate, fluoride, acetate, and phosphate anions. The response was linear (over the 20 microM-7 mM range) and reproducible (RSD = 3.4-4.9%; n = 10), with detection limits of 2.8 and 6.4 microM (for potassium and chloride, respectively). The advantages associated with the contactless conductivity detection, along with the low cost of the integrated PMMA chip/detection system, should enhance the power and scope of microfluidic analytical devices.