Dielectric integrity of thin thermal oxides on silicon

The role of silicon dioxide layers in microelectronics and the importance of their integrity are undisputable. From passivating coatings and masking layers for diffusion to ultra-thin tunneling films — all the silicon technology could not exist without silicon dioxide. This review deals with some aspects of the integrity of thin silicon dioxide films for VLSI applications. The problems of dielectric strength and wear-out are considered from the point of view of their mechanisms, models, oxide processing dependence, testing, and measuring. A brief presentation of statistical approaches commonly applied to reliability topics is also included.     

Correlation between magnetic hysteresis and magnetic relaxation in YBaCuO single crystals

The dependence of the magnetic momentm obtained from the hysteresis loops on the speed of the magnetic field sweep =dH _ext/dt is explained on the basis of Anderson's interpretation of the magnetic flux creep. In addition, a phenomenological model is suggested which predicts a linear dependence ofm on ln with the slope m/ ln , numerically equal to the relaxation rate m/ ln(t) from the usual magnetic relaxation. Such linear relations betweenm and ln were observed experimentally in single crystals of YBaCuO. Preliminary experiments on the complementary time dependent relaxation ofm after a simulated step change ofH _ext gave mostly relaxation rates close to the predicted values. The model here presented also enables one to compare the critical state in the superconductor at a field sweep rate with the critical state at some timet _eff after a step change ofH _ext. The values of analyzed in our experiments actually correspond to the critical state at timest _eff between0.04 and4 sec after an imaginary large step change ofH _ext.     

Preparation and characterization of lanthanum silicon nitride

Lanthanum silicon nitride (LaSi₃N₅) powder has been prepared under the relatively mild conditions of 1400 ° C and 1 atm nitrogen. Chemical, X-ray diffraction, solid state nuclear magnetic resonance spectra and morphological information on this powder is presented. The X-ray diffraction data and previously published information have been used to develop a more complete specification of the unit cell dimensions.²⁹Si magic-angle spinning nuclear magnetic resonance spectra of LaSi₃N₅ show two chemical shifts at –64.5 and –56.5 p.p.m. These shifts reflect two electronically different types of silicon which have been attributed to the effects of quadrupolar¹³⁹La nuclei and their spatial arrangements around silicon atoms.     

A study of Nd2Fe14B and a neodymium-rich phase in sintered NdFeB magnets

The microstructure and properties of NdFeB sintered permanent magnets were analysed by different methods. Samples analysed were sintered and thermally treated. The hard magnetic Nd₂Fe₁₄B phase and amorphous neodymium-rich phase were observed by TEM. The neodymium-rich phase contained iron and boron, in elemental and in B₂O₃ form, which is known as a glass former. At the sintering temperature, Nd₂Fe₁₄B and the neodymium-rich phase are supersaturated with iron, which should be dissolved at the annealing temperature to react with neodymium and boron and form additional Nd₂Fe₁₄B phase. Iron precipitates of size up to 2 nm were detected in the Nd₂Fe₁₄B phase. These superparamagnetic precipitates of -Fe could affect the hard magnetic properties of NdFeB magnets.     

Carcass traits and meat quality of male lambs fed monensin or lasalocid

Male lambs, crossbred Merino × Ille de France, were fed a diet supplemented with 31 mg monensin or 32 mg lasalocid per kg of feed dry matter from an initial body weight of 23·6–23·9 kg to the slaughter weight of approximately 40 kg.

Carcass traits and meat quality were evaluated after slaughter; the values obtained were compared with those of the control group fed the same diet without the ionophore supplement.

There were few significant differences among the individual groups in carcass value, sensoric and technological properties of meat and of its composition. However, the lasalocid-fed group seemed to be somewhat better in muscling and in the composition of meat.     

Synthesis of 2-amino-6-(2-formyl-5-hydroxymethyl-1-pyrrolyl-)hexanoic acid

Summary The title compound has been synthesized by a novel route fromN -trifluoroacetyl lysine methyl ester and 2,9-dimethyldeca-2,8-diene-4,7-dione. Transformation of the pyrrole substituents and easy cleavage of protecting groups yields the compound in samples of high purity.

---

Synthese der 2-Amino-6-(2-formyl-5-hydroxymethyl-l-pyrrolyl)-hexansäure

Zusammenfassung Die Titelverbindung wird auf einem neuen Weg ausN -Trifluoracetyllysinmethylester und 2,9-Dimethyldeca-2,8-dien-4,7-dion synthetisiert. Nach Umwandlung der Pyrrolsubstituenten und Abspaltung der Schutzgruppen unter milden Bedingungen erhält man die Titelverbindung in hoher Reinheit.

     

Thermodynamic analysis of the refining of technical boron nitride

The efficiency of the process of refining technical boron nitride was assessed based on calculations of the chemical equilibrium in the B-N-O-C-Cl-H system. Three refining mixtures, CCl₄ + H₂, CCl₄ + NH₃ and CHCl₃ + NH₃, were considered. The analysis indicates that the use of ammonia-containing mixtures is more convenient, a lower residual oxygen content, lower contamination of the product by carbon and a better overall boron balance emerging. The calculations of the equilibrium composition of the solid phase enabled suitable technological conditions of the refining process (temperature and starting composition of the gaseous phase) to be established. The calculated results are compared with experimental data, and some observed differences are discussed.     

Diffusion of the hydroxide-ion in liquid CaO-Al2O3-slags by application of Fourier-Transform-lnfrared-Spectroscopy

Water vapour is soluted in liquid CaO-Al₂O₃-slags as OH^?-ion. To determine the diffusion coefficient a capillary technique is used. Roughly 5 cm long platinum capillaries filled with liquid slag are equilibrated at 1500 and 1600 °C and bar different times and then are quenched in liquid D₂O. By dividing these capillaries into roughly 3 mm long segments enough sample substance is won to obtain FT-IR spectra of the OH-band. From measurement of the integral extinction of the OH-band and OH^?-concentration profile through the capillary is obtained. FT-IR-spectroscopy is very suitable for this capillary technique because it needs only very little sample substance.