Embedded entertainment with smart projectors

The popularity of today's flat-panel liquid-crystal and plasma TV displays shows that emerging trends favor large-screen displays. Another display type may soon conquer the entertainment market, however: video projectors have experienced an enormous metamorphosis during the past decade. These devices now offer admirable cost reductions and performance increases, and they can generate images much larger than the devices themselves. The screens on which they project their images, however, require a large area. Smart projectors, on the other hand, allow a correct projection onto many arbitrary existing surfaces, such as papered walls or curtained windows.     

UPTF experiment: Flow phenomena during full-scale loop seal clearing of a PWR

To investigate the flow phenomena in the primary system of a pressurized water reactor (PWR) during a loss-of-coolant accident (LOCA) occurring with a small or intermediate break, experiments were performed at the full-scale Upper Plenum Test Facility (UPTF). Within the Transient and Accident Management (TRAM) program integral and separate effect tests were carried out to study loop seal clearing and to provide data for the further improvement of computer codes concerning the reactor safety analysis. This paper describes the UPTF tests that focus on the sequence of loop seal clearance in a four-loop operation for two different cold leg break sizes and the residual water levels, the flow patterns in, and the pressure drops across a single loop seal during the clearing. The UPTF results obtained from a single-loop seal operation are compared with experimental data and correlations available in the literature. Two correlations are proposed which allow the quantification of residual water levels in the loop seal under PWR conditions. It is shown that the steam–water test results gained from the full-scale UPTF with realistic PWR loop seal geometry differ from those obtained from the full or small-scale test facilities under air–water conditions. The UPTF experiments indicate the substantial need for steam-water test data from a full-scale facility with realistic PWR geometries in order to validate PWR LOCA thermal-hydraulic system codes to predict loop seal clearing correctly.     

Multiagentensimulation

Zusammenfassung Voraussetzung für jede erfolgreiche Simulationsstudie ist, dass ein Modellierer einen Teil der Wirklichkeit so in einem Modell abbildet, dass das Modell diesen Ausschnitt für das Simulationsziel ausreichend genau widerspiegelt. Es gibt verschiedene Paradigmen und Techniken zur Formulierung eines Modells. Multiagentensimulation (auch agentenbasierte oder agentenorientierte Simulation) ist dabei eine relativ neue Form der Modellierung und Simulation, die gerade bei komplexen Modellen, z.B. von Gesellschaften, ihr Potential aussch?pfen kann.     

An infinite hierarchy induced by depth synchronization

Depth-synchronization measures the number of parallel derivation steps in a synchronized context-free (SCF) grammar. When not bounded by a constant the depth-synchronization measure of an SCF grammar is at least logarithmic and at most linear with respect to the word length. Languages with linear depth-synchronization measure and languages with a depth-synchronization measure in between logarithmic and linear are proven to exist. This gives rise to a strict infinite hierarchy within the family of SCF (and ET0L) languages.     

A Membrane‐Bound Prenyltransferase Catalyzes the O‐Prenylation of 1,6‐Dihydroxyphenazine in the Marine Bacterium Streptomyces sp. CNQ‐509

Streptomyces sp. CNQ‐509 produces the rare O‐prenylated phenazines marinophenazines A and B. To identify the enzyme catalyzing the O‐prenyl transfer in marinophenazine biosynthesis, we sequenced the genome of S. sp. CNQ‐509. This led to the identification of two genomic loci harboring putative phenazine biosynthesis genes. The first locus contains orthologues for all seven genes involved in phenazine‐1‐carboxylic acid biosynthesis in pseudomonads. The second locus contains two known phenazine biosynthesis genes and a putative prenyltransferase gene termed cnqPT1. cnqPT1 codes for a membrane protein with sequence similarity to the prenyltransferase UbiA of ubiquinone biosynthesis. The enzyme CnqPT1 was identified as a 1,6‐dihydroxyphenazine geranyltransferase, which catalyzes the C?O bond formation between C‐1 of the geranyl moiety and O‐6 of the phenazine scaffold. CnqPT1 is the first example of a prenyltransferase catalyzing O‐prenyl transfer to a phenazine.     

Nanofibrillated cellulose in wood coatings: mechanical properties of free composite films

Composite films of nanofibrillated cellulose (NFC), derived from beech wood pulp, and 8 commercial acrylic and alkyd polymeric binders were prepared. Structural and mechanical properties of the composites were assessed by microscopy and tensile tests before and after aging. While the NFC was compatible with acrylate polymers, it formed undesired aggregates during processing with the alkyd polymers. Modulus of elasticity, tensile strength, and elongation at break of prepared films depended on the initial properties of the neat polymers. All composite films were stiffer, stronger, and less extensible than the corresponding neat polymer films. The reinforcing effect increased with increasing NFC content. Aging by artificial weathering strongly affected the mechanical properties of neat polymer and composite films. Alkyd films became, compared to the acrylate films, much stiffer and more brittle after artificial weathering. The results of the mechanical tests are regarded as promising step to use NFC as novel component in wood coatings.     

Stress reduces use of negative feedback in a feedback-based learning task.

In contrast to the well-established effects of stress on learning of declarative material, much less is known about stress effects on reward- or feedback-based learning. Differential effects on positive and negative feedback especially have received little attention. The objective of this study, thus, was to investigate effects of psychosocial stress on feedback-based learning with a particular focus on the use of negative and positive feedback during learning. Participants completed a probabilistic selection task in both a stress and a control condition. The task allowed quantification of how much participants relied on positive and negative feedback during learning. Although stress had no effect on general acquisition of the task, results indicate that participants used negative feedback significantly less during learning after stress compared with the control condition. An enhancing effect of stress on use of positive feedback failed to reach significance. These findings suggest that stress acts differentially on the use of positive and negative feedback during learning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

ZnO‐Based UV Nanocomposites for Wood Coatings in Outdoor Applications

Nanocomposite UV coatings with adjustable properties for use on wood substrates in outdoor conditions were developed. Nanoscale ZnO was shown to be an efficient light absorber. Coatings were characterized in terms of elongation at brake, residual PI and double bond conversion, universal hardness, transparency, hydrophobicity, and yellowing. Coated samples were artificially weathered and studied with regard to their optical and mechanical properties, as well as to changes in brightness, transparency, hydrophobicity, and water permeability. The prepared wood coatings showed an increased weather fastness and improved optical properties. The suitability for use in outdoor conditions was assured by optimizing the elasticity of the coating and decreasing its water permeability.

     

Magnetic properties of mechanochemically synthesized γ-Fe2O3 nanoparticles

The synthesis of mono-dispersed γ-Fe₂O₃ nanoparticles by mechanochemical processing was demonstrated for the first time, via the solid-state exchange reaction Fe₂(SO₄)₃ + 3Na₂CO₃ → Fe₂(CO₃)₃ + 3Na₂SO₄ → Fe₂O₃ + 3Na₂SO₄ + 3CO₂(g) and subsequent heat treatment at 673 K. The nanoparticles had a volume-weighted mean diameter of 6 nm and a narrow size distribution with the standard deviation of 3 nm. The particles showed a superparamagnetic nature with the superparamagnetic blocking temperature of 56.6 K. The anisotropy constant was 6.0 × 10⁶ erg/cm³, two orders of magnitude larger than the magnetocrystalline anisotropy constant of bulk γ-Fe₂O₃. The detailed analysis of the magnetic properties indicated that the γ-Fe₂O₃ nanoparticles had a core-shell structure, consisting of a ferrimagnetic core of ∼4 nm in diameter having a collinear spin configuration and a magnetically disordered shell of ∼1.2 nm in thickness.     

Cardiolipin Stabilizes and Increases Catalytic Efficiency of Carnitine Palmitoyltransferase II and Its Variants S113L,P50H,and Y479F

Muscle carnitine palmitoyltransferase II (CPT II) deficiency is associated with various mutations in CPT2 gene. In the present study, the impact of the two CPT II variants P50H and Y479F were characterized in terms of stability and activity in vitro in comparison to wildtype (WT) and the well investigated variant S113L. While the initial enzyme activity of all variants showed wild-type-like behavior, the activity half-lives of the variants at different temperatures were severely reduced. This finding was validated by the investigation of thermostability of the enzymes using nano differential scanning fluorimetry (nanoDSF). Further, it was studied whether the protein stabilizing diphosphatidylglycerol cardiolipin (CL) has an effect on the variants. CL indeed had a positive effect on the stability. This effect was strongest for WT and least pronounced for variant P50H. Additionally, CL improved the catalytic efficiency for CPT II WT and the investigated variants by twofold when carnitine was the varied substrate due to a decrease in K_M. However, there was no influence detected for the variation of substrate palmitoyl-CoA. The functional consequences of the stabilization by CL in vivo remain open.