Effects of estrogen-induced hyperlipidemia on the erythrocyte membrane in chicks

The effects of estrogen-induced hyperlipidemia on plasma lipid peroxidation, fatty acid composition and osmotic fragility of erythrocytes in chickens were studied. Young male chickens implanted with estrogen for three wk developed a marked hyperlipidemia. Plasma levels of triglyceride, cholesterol and phospholipid were elevated 68-, four- and 24-fold, respectively, over controls. There was also a two-fold increase in plasma lipid peroxidation measured by the thiobarbituric acid test. Vitamin E supplement (1,000 IU/kg diet) reduced the plasma lipid peroxidation to the control level, but had no effect on the plasma lipid content. Estrogen-induced hyperlipidemia resulted in changes in the fatty acid composition of membrane lipids of erythrocytes. The major changes were an increase in oleic acid from 10.0% to 14.2% and a decrease in linoleic acid from 31.3% to 26.0%. The erytrocytes with an altered membrane fatty acid composition were found to have an increased osmotic fragility. It was apparent that there was a direct correlation between the oleic acid content and the osmotic fragility of erythrocytes.     

Mechanical Behavior of Several Hybrid Ceramic-Matrix-Composite Laminates

Several different hybrid laminated composites comprised of alternating layers of dense ceramic sheets (either SiC or Si₃N₄) and fiber-reinforced ceramic-matrix-composite (CMC) layers (Nicalon fibers with either glass or glass-ceramic matrices) have been fabricated and characterized. The effects of the reinforcement architecture (unidirectional vs cross-ply) and the relative volume fractions of the phases on the tensile and flexural properties have been examined. Comparisons have been made with the properties of the constituent layers. Rudimentary models have been developed to describe the onset of cracking and for the minimum volume fraction of CMC required to develop multiple cracks and thus obtain a high failure strain.     

A web-based platform for biosignal visualization and annotation

With the advent of wearable sensing and mobile technologies, biosignals have seen an increasingly growing number of application areas, leading to the collection of large volumes of data. One of the difficulties in dealing with these data sets, and in the development of automated machine learning systems which use them as input, is the lack of reliable ground truth information. In this paper we present a new web-based platform for visualization, retrieval and annotation of biosignals by non-technical users, aimed at improving the process of ground truth collection for biomedical applications. Moreover, a novel extendable and scalable data representation model and persistency framework is presented. The results of the experimental evaluation with possible users has further confirmed the potential of the presented framework.     

Al2TiO5-ZrTiO4-ZrO2 Composites: A New Family of Low-Thermal-Expansion Ceramics

The characterization and properties of ceramic composites containing the phases Al₂TiO₅, ZrTiO₄, and ZrO₂ are described. The range of compositions investigated gives very low average thermal expansions (α_24–1000°C as low as −2.0 × 10⁻⁶°C⁻¹) and excellent high-temperature stability. The low thermal expansions are apparently due to a combination of microcracking by the titanate phases and a contractive phase transformation by the ZrO₂. The crystal chemistry and microstructure of the product are processing dependent. Although the composites represent a complex microcracking system, the low thermal expansions and high-temperature stability make them potential candidates for commercial applications requiring thermal shock resistance.     

Effect of Zwitterionic Surfactants on Interparticle Forces, Rheology, and Particle Packing of Silicon Nitride Slurries

Phosphocholine (PC) zwitterionic surfactants, with different hydrocarbon chain lengths (C₆C₆PC to C₉C₉PC), were absorbed on the surface of silicon nitride near the isoelectric point (pH 6). Adsorption of the surfactants changed the lateral and normal surface forces, the rheology, and the consolidation behavior of the particles. The normal force between two silicon nitride surfaces as a function of separation and the lateral (friction) forces were measured using an atomic force microscope (AFM). These measurements indicated that surfactant adsorption reduced the magnitude of the long-range attractive van der Waals force and produced a repulsive short-range force. Although the adsorbed layers provided a barrier to particle contact, they could be ejected with a critical force that increased with the hydrocarbon chain length. The effect of an adsorbed layer on the viscosity and consolidation of slurries was also measured. The viscosity of all slurries decreased with increasing shear rate, indicative of attractive particle networks. The highest viscosity was observed for slurries formulated at the isoelectric point without added surfactant. Much lower viscosities were observed when the surfactant concentration was greater than the critical micelle concentration (cmc). A relative density of 0.46 was obtained via pressure filtration at 4 MPa without a surfactant, and between 0.46 to 0.59 (C₆C₆PC to C₉C₉PC, respectively) for surfactant concentrations greater than the cmc. Comparing force measurements with rheology and packing density provides a basis for discussing the role of interparticle forces in ceramic powder processing via colloidal routes.     

Solving multicolumn equilibrium stage operations by total linearization

An efficient, reliable and easily programmed method for solving systems of equilibrium stage separation devices is described. The method is an extension of an algorithm developed by Ishii and Otto⁽⁹⁾ for single columns. It solves all equations simultaneously, takes advantage of the basic tridiagonal matrix form form of the linearized steady state equations and can handle configurations which include distillation columns, absorbers and reboiled absorbers. The solution for a thermally coupled distillation system is presented.     

"Alumina" Surface Modification of Silicon Nitride for Colloidal Processing

Two different methods are used to coat silicon nitride particles with an alumina precursor to make Si₃N₄ behave like Al₂O₃ in aqueous slurries. The first method involves the precipitation of an aluminum hydroxycarbonate from dissolved Al(NO₃)₃ during the decomposition of urea. In the second method, dry silicon nitride powder is reacted with aluminum tri- sec -butoxide in hexane at room temperature. Both methods produce a coated powder in which the electrophoretic and rheological properties of aqueous slurries mimic those of alumina. When salt is added to slurries consisting of coated Si₃N₄ powder, all rheological evidence suggests the presence of a short-range repulsive potential that produces a weakly attractive particle network similar to that previously reported for Al₂O₃ powder. Although electrophoretic and rheological data showed that the coated powder behaved like Al₂O₃, consolidation data indicated that slurries of coated powder with added salt did not pack to high density. In addition, these bodies were not plastic as found for bodies consolidated from dispersed and salt-added Al₂O₃ slurries.     

Metastable Phase Selection and Partitioning for Zr(1−x)AlxO(2−x/2) Materials Synthesized with Liquid Precursors

Aqueous solutions of zirconium acetate and aluminum nitrate were spray pyrolyzed at 250°C and upquenched to different temperatures to yield metastable solid solutions of composition Zr_{(1− x )}Al_xO_{(2− x /2)}. An amorphous oxide forms first during pyrolysis which subsequently crystallizes as a single phase for x ≤ 0.57 (≤40 mol% Al₂O₃). The crystallization temperature increased with Al₂O₃ content. Electron diffraction, supported by Raman spectroscopy, indicates that the initial phase is tetragonal. At higher temperatures, the initial solid solation partitions to other metastable phases, viz., t -ZrO₂+γ-Al₂O₃, prior to achieving their equilibrium phase assemblage, m -ZrO₂+α-Al₂O₃. Partitioning yields a nanocomposite microstructure with grain sizes of 20–100 nm, compared to the 3 to 5 nm in the initial, single phase. Compositions containing 45 to 50 mol% Al₂O₃ concurrently crystallize and partition. The structure selected during crystallization and the partitioning phenomena are discussed in terms of diffusional constraints during crystallization, which are conceptually similar to those operating during rapid solidification.     

The effect of inorganic additives on the formation,composition, and combustion of cellulosic char

At temperature above 300°C the glycosyl units of cellulose are simultaneously depolymerized to a tar and decomposed to a char by evolution of H₂O, CO, and CO₂. When the glycosyl units are depleted, a stable char is formed containing about 30% aliphatic and 70% aromatic components. The aliphatic component is formed first, but on further heating is converted to polycyclic aromatic structures. The chars formed at lower temperatures are more combustible because the aliphatic component of the char is highly pyrophoric and is oxidized almost at the same temperature at which it is formed (～360°C). The aromatic component, however, is less reactive and is oxidized at ～520°C. Consequently, the chars formed at higher temperatures are less combustible. It has been shown that (NH₄)₂HPO₄, which is a well-known flame retardant and smoldering inhibitor, lowers the pyrolysis temperature and increases the char yield by accelerating the decomposition reactions. This affects the composition of the intermediate chars but the final products have about the same composition irrespective of additives. (NH₄)₂HPO₄ also lowers the rate of oxidation of the aromatic component and the corresponding heat release. NaCl, which is an enhancer of smoldering combustion, has a slight stabilizing effect on pyrolysis of cellulose. It lowers the oxidation temperature of the aromatic component and dramatically increases its rate. The corresponding heat release is also increased due to complete oxidation to CO₂. The rate of oxidation calculated from the dynamic thermal analysis data is more than tripled by NaCl and significantly reduced by (NH₄)₂HPO₄.     

The crystal state binding of dithionite to deoxy-hemoglobin

The crystal state binding of sodium ditbionite to deoxyhemoglobinis reported. Dithionite has been used extensively to deoxygenatehemoglobin and myoglobin and there has been considerable interestamong users of dithionite about its effect on protein structureand binding site(s). We have determined that dithionite bindsto deoxygenated hemoglobin crystals at the interface of twomolecules in the crystal lattice. Specific residues involvedin hydrogen bonds or salt interactions with dithionite includeHisll6 and Hisll7 of the ft subunit and Lysl6 of the ß₂subunit of the adjacent hemoglobin molecule. No binding wasobserved at the symmetry related Hisll6 and 117 ß1 residues.We have shown that dithionite does not affect the native hemoglobinstructure or the binding of several allosteric inhibitors tohemoglobin and can be used to mount T state crystals in theair