Mechanical and Tribological Properties of Ca/P-Doped Titanium Dioxide Layer Produced by Plasma Electrolytic Oxidation: Effects of Applied Voltage and Heat Treatment

Plasma electrolytic oxidation (PEO) is a technique that produces a hard oxide layer on the titanium surface where its properties can be tailored by changing the process parameters or by a posterior heat treatment (HT). In this work, a TiO₂ layer with different crystallinity was produced by PEO with different applied voltages (250 to 400 V) and post-HT at 600°C. Our aim was to evaluate the influence of the PEO voltage and HT on the mechanical and tribological properties of anodized Ti. There is an increase in pore size, oxide thickness, and Ca/P ratio for the oxide layer with the applied voltage during the PEO process. X-ray diffraction (XRD) results indicated an increase in the crystalline rutile phase in the oxide layer with voltage and HT. Nanoindentation shows an increase in the oxide hardness and elastic modulus with increased voltage and HT, leading to an improvement in the wear resistance.     

Synthesis of Alkyl Fructosides

The anomeric alkylation of D-fructose is efficiently catalyzed by mild acid catalysts. Degradation of fructose is negligible under the conditions applied.     

Removing low ppb level perchlorate, RDX, and HMX from groundwater with cetyltrimethylammonium chloride (CTAC) pre-loaded activated carbon

Perchlorate contaminates vast amounts of groundwater throughout the United States which could potentially be used as potable water. Activated carbon pre-loaded with cetyltrimethylammonium chloride has been shown in this research to be an effective adsorbent for removing perchlorate from three low conductivity (50-66 microS/cm) groundwaters containing perchlorate (ClO(4)(-)) concentrations of 0.85, 1.0, and 5.6 parts per billion (ppb), respectively. In rapid small-scale column tests (RSSCTs), the virgin granular activated carbon (GAC) (used as a control) treated between 20,000 and 40,000 bed volumes (BV) of water. In contrast, the activated carbon that was pre-loaded with CTAC processed 170,000-270,000 BV before perchlorate was detected above 0.25 ppb in the effluent. Though this pre-loading significantly increased the capacity for perchlorate, it also diminished the GAC's capacity to remove organics. The groundwater containing 1 ppb ClO(4)(-) also contained the nitro-organics HMX (0.6 ppb) and RDX (5.5-6.6 ppb). RDX was detected in the effluent from the CTAC-pre-loaded bed after only 8000 BV had been processed whereas 308,000 BV could be processed through the virgin bed before RDX was detected. Likewise, HMX breakthrough was observed after 116,000 BV in the CTAC-pre-loaded bed while the virgin RSSCT exhibited no breakthrough of HMX during a test that was operated for 309,000 BV. However, by combining a CTAC-pre-loaded bed followed by a virgin GAC bed in series, both perchlorate and RDX could be removed for the same length of time.     

Polymer nanocomposites: A small part of the story

Polymer nanocomposites are polymer matrix composites in which the fillers are less than 100 nm in at least one dimension. These composites have exhibited extraordinarily interesting properties. A defining feature of polymer nanocomposites is that the small size of the fillers leads to a dramatic increase in interfacial area as compared to traditional composites. This interfacial area creates a significant volume fraction of interfacial polymer with properties different from the bulk polymer even at low loadings. The properties and structure of this interfacial region are not yet known quantitatively, presenting a challenge both for controlling and predicting the properties of polymer nanocomposites. This paper provides a brief overview of polymer nanocomposites with emphasis on the impact of the interfacial region.     

An efficient evolutionary algorithm to optimize the Choquet integral

Information fusion is an essential part of nearly all systems whose goal is to derive decisions from multiple sources. Often, a fusion solution has parameters and the goal is to learn them from data. Herein, we propose efficient evolutionary algorithm (EA) operators to facilitate learning the Choquet integral (ChI). Whereas many EAs provide a way to solve complex, unconstrained optimization tasks, most tend to perform relatively poor in light of constraints. Recently, a few EA-based approaches to optimizing the ChI have appeared. Namely, these methods focus on fixing the values of variables so conditions are met or feasible candidate pairs are identified for steps such as crossover. Herein, we introduce a new set of transparent operators that are guaranteed to naturally preserve constraints, thus eliminating the need to resort to costly evaluations and fixing of constraint violations. In particular, our method scales well to large numbers of inequality constraints, something that prior work does not. The proposed algorithm, coined efficient ChI genetic algorithm (ECGA), is evaluated on several synthetic data sets and it is compared with state-of-the-art algorithms. In particular, we show benefits in terms of solutions found and the time it takes to find such an answer.     

Structural and functional properties of full-length and truncated human proapolipoprotein AI expressed in escherichia coli

Utilizing the Escherichia coli/pGex vector expression system incorporating a thrombin cleavage site, full-length (residues -6-243) and truncated forms of proapolipoprotein AI (proapoAI), terminating at amino acid residues 222, 210, 150, and 135, were purified to levels of at least 5 mg/L, after thrombin cleavage. Assessed by circular dichroism, the helical contents of L-alpha-dimyristoylphosphatidylcholine-associated forms of human plasma-derived apolipoprotein AI (apoAI) and recombinant proapoAI were comparable, being 69% and 65%, respectively. Circular dichroism measurements of the lipid-associated complexes of the truncated forms showed that between the sequence of residues 150-222 no additional helicity was gained until the carboxyl-terminal sequence was present in the molecule, indicating that the carboxyl terminus of the protein is required for the formation of helix within this central region. While tryptophan residues were more than 86% accessible, as assessed by iodide quenching, in the two truncated forms, proapoAI-6-135 and proapoAI-6-150, for both free and complexed protein, this figure fell to about 50% for full-length recombinant proapoAI, further indicating the influence of the carboxyl terminus on the structure of the whole protein. While cross-linking human plasma apoAI in solution with dithiobis-(succinimidyl propionate) revealed high molecular weight oligomers by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, recombinant proapoAI did not strongly form complexes larger than trimers. None of the truncated proapoAI molecules formed oligomers larger than trimers. The shortest form, proapoAI-6-135, only dimerized. Initial results from lecithin:cholesterol acyltransferase activation (apoAI peptide concentration 0.2 microM) indicated that truncation of the 21 carboxy-terminal amino acids resulted in a drop of approximately 53% in activation and 33 residues a drop of 67% relative to the full-length protein. Overall these results indicate the important influence of the carboxyl terminus on the structure of apoAI.     

Iron(II)/reductant(DH2)-induced activation of dioxygen for the hydroxylation and ketonization of hydrocarbons; mimics for the cytochrome P-450 hydroxylase/reductase system

Several metal complexes [(FeII(DPAH)2 (DPAH2 = 2,6-dicarboxyl pyridine), FeII(PA)2 (PAH = picolinic acid), FeII(bpy)2(2+), FeII(OPPh3)4(2+), (Cl8TPP)FeIIIX (X = Cl, OH, SCH2Ph) [Cl8TPP = tetrakis (2,6-dichlorophenyl)porphyrin], (TPP) FeIIICl (TPP = tetraphenylporphyrin), and CuI(tpy)2+ (typ = 2,2'-6,2"-terpyridine)] in combination with one of several reductants [DH2; PhNHNHPh (mimic of dihydroflavin), PhNHNH2, ascorbic acid (H2asc), and PhCH2SH (model ligand for cysteine residue)] catalytically activate O2 (1 atm) for the hydroxylation of saturated hydrocarbons (e.g. c-C6H12-->c-C6H11OH). This chemistry closely parallels that of cytochrome P-450 proteins, and both appear to involve a Fenton-like reactive intermediate), [LxFeOOH(DH)]. With cyclohexane as the substrate the dominant product is its ketone (as well as significant amounts of its hydroperoxide). 1,4-Cyclohexadiene (with two double-allylic carbon centers) undergoes dehydrogenation to give benzene, but also yields substantial amounts of phenol via ketonization of an allylic carbon. The 1:1 FeII(bpy)2(2+)/(PhNHNH2 or H2asc), FeII(PA)2/H2asc, and (Cl8TPP)FeIIICl/PhNHNH2 combinations initiate the autoxidation of 1,4-cyclohexadiene with turnover numbers (moles of product per mole of reductant) from 71 to 26, respectively (alpha-tocophenol reduces the turnover numbers by 20-80%). With respect to aerobic biology, the present results indicate that dysfunctional transition metals (degradation products of metalloproteins) in combination with biological reductants activate O2 for reaction with organic substrates. The level of activation is similar to that for Fenton reagents and cytochrome P-450 hydroxylases. Hence, dysfunctional transition metals, reductants, and O2 are a hazardous combination within a biological matrix.