Effects of thermal processing and iron doping in co-sputtered barium strontium titanate thin films

The effects of the thermal processing and iron doping on RF magnetron co-sputtered barium strontium titanate thin film properties have been investigated. X-ray diffraction and Raman spectroscopy have been used to determine the structural evolution of the films as a function of the annealing temperature and the amount of iron dopant. X-ray photoelectron spectroscopy and electron paramagnetic resonance spectroscopy were employed to gain information about the chemical binding states and the defect structure. The enhancement of the quality factor Q, as well as the decreasing permittivity and tunability due to iron acceptor doping are demonstrated.     

The influence of third-body particles on wear rate in unicondylar knee arthroplasty: a wear simulator study with bone and cement debris

The reduced intraoperative visibility of minimally invasive implanted unicondylar knee arthroplasty makes it difficult to remove bone and cement debris, which have been reported on the surface of damaged and retrieved bearings. Therefore, the aim of this study was to analyze the influence of bone and cement particles on the wear rate of unicompartmental knee prostheses in vitro. Fixed bearing unicompartmental knee prostheses were tested using a knee-wear-simulator according to the ISO standard 14243-1:2002(E) for 5.0 million cycles. Afterwards bone debris (particle size 671 ± 262 μm) were added to the test fluid in a concentration of 5 g/l for 1.5 million cycles, followed by 1.5 million cycles blended with cement debris (particle size 644 ± 186 μm) in the same concentration. Wear rate, knee-kinematics and wear-pattern were analyzed. The wear rate reached 12.5 ± 1.0 mm³/million cycles in the running-in and decreased during the steady state phase to 4.4 ± 0.91 mm³/million cycles. Bone particles resulted in a wear rate of 3.0 ± 1.27 mm³/million cycles with no influence on the wear rate compared to the steady state phase. Cement particles, however, lead to a significantly higher wear rate (25.0 ± 16.93 mm³/million cycles) compared to the steady state phase. The careful removal of extruded cement debris during implantation may help in reducing wear rate. Bone debris are suggested to have less critical influence on the prostheses wear rate.     

On the design and modeling of microcontrolled fuzzy nuclear power plant controller

The article presents a working model of Control rod insertion in nuclear power plant based on fuzzy logic and implemented with MC68HC11 microcontroller. The control rods are made of neutron absorbing metal. The amount of control rod insertion into a pressurized water reactor in a nuclear power plant controls the nuclear fission process by controlling the rate at which the chain reaction takes place. The temperature in the pressurized water tank varies with the load of power, the higher the demand of power the higher the temperature and vice versa. The control rods help to maintain the appropriate temperature in the core of the reactor. Nuclear Power plants use a very complicated control scheme, to vary the amount of control rod insertion which is very expensive and difficult to troubleshoot. We have developed a fuzzy model, tested its functionality by generating control surfaces, written the fuzzy inference software, downloaded in the EEPROM of MC68HC11, and interfaced it with 8 LED Bar to simulate control rod and two 8-bit DIP switches to enter inputs of Power Generation and Temperature of the core of the reactor. © 1996 John Wiley & Sons, Inc.     

Characterization of novel thermoresponsive poly(butylene adipate-co-terephthalate)/poly(N-isopropylacrylamide) electrospun fibers

Polymer Bulletin - In this work, electrospun fibers of poly(butylene adipate-co-terephthalate) (PBAT) and poly(N-isopropylacrylamide) (PNIPAAm) blends, PBAT/PNIPAAm, with different mass ratios,...     

Multi-scale mechanistic modelling of the host defence in invasive aspergillosis reveals leucocyte activation and iron acquisition as drivers of infection outcome

Aspergillus species are ubiquitous environmental moulds, with spores inhaled daily by most humans. Immunocompromised hosts can develop an invasive infection resulting in high mortality. There is, therefore, a pressing need for host-centric therapeutics for this infection. To address it, we created a multi-scale computational model of the infection, focused on its interaction with the innate immune system and iron, a critical nutrient for the pathogen. The model, parameterized using published data, was found to recapitulate a wide range of biological features and was experimentally validated in vivo. Conidial swelling was identified as critical in fungal strains with high growth, whereas the siderophore secretion rate seems to be an essential prerequisite for the establishment of the infection in low-growth strains. In immunocompetent hosts, high growth, high swelling probability and impaired leucocyte activation lead to a high conidial germination rate. Similarly, in neutropenic hosts, high fungal growth was achieved through synergy between high growth rate, high swelling probability, slow leucocyte activation and high siderophore secretion. In summary, the model reveals a small set of parameters related to fungal growth, iron acquisition and leucocyte activation as critical determinants of the fate of the infection.     

Lipid specificity and location of the sterol carrier protein-2 fatty acid-binding site: A fluorescence displacement and energy transfer study

Although it was recently recognized that sterol carrier protein-2 (SCP-2) interacts with fatty acids, little is known regarding the specificity of SCP-2 for long-chain fatty acids or branched-chain fatty-acid-like molecules. Likewise the location of the fatty-acid binding site within SCP-2 is unresolved. A fluorescent cis-parinaric acid displacement assay was used to show that SCP-2 optimally interacted with 14–22 carbon chain lipidic molecules: polyunsaturated fatty acids > monounsaturated, saturated > branched-chain isoprenoids > branched-chain phytol-derived fatty acids. In contrast, the other major fatty-acid binding protein in liver, fatty-acid binding protein (L-FABP), displayed a much narrower carbon chain preference in general: polyunsaturated fatty acids > branched-chain phytol-derived fatty acids > 14- and 16-carbon saturated > branched-chain isoprenoids. However, both SCP-2 and l-FABP displayed a very similar unsaturated fatty-acid specificity profile. The presence and location of the SCP-2 lipid binding site were investigated by fluorescence energy transfer. The distance between the SCP-2 Trp⁵⁰ and bound cis-parinaric acid was determined to be 40 Å. Thus, the SCP-2 fatty-acid binding site appeared to be located on the opposite side of the SCP-2 Trp⁵⁰. These findings not only contribute to our understanding of the SCP-2 ligand binding site but also provide evidence suggesting a potential role for SCP-2 and/or L-FABP in metabolism of branched-chain fatty acids and isoprenoids.