Finite element analysis of a polymer composite subjected to a sliding steel asperity Part I Normal fibre orientation

FE micro-models have been developed in order to determine contact, stress and strain conditions produced by a steel asperity sliding on the surface of a normally oriented fibre-reinforced polymer composite. A displacement coupling technique was introduced to model a micro-environment as part of a macro-environment and to get more realistic simulation results about the failure conditions in the composite structure, in comparison to the so far widely applied anisotropic analytical or numerical macro-models. On the basis of the results, conclusions may be drawn for the possible wear mechanisms of the fibre-reinforced polymer composite. Stress results in the vicinity of the fibers in the contact area show high shear loading of the matrix leading to the formation of stretched-out matrix wear debris. In addition, high repeated compression-tension stresses at the fibre/matrix interface near the surface can lead to fibre debonding phenomena. Considering the fibre ends in the contact region, high compression stresses at their rear edges can produce fibre cracking features. To study the wear mechanisms experimentally, a single asperity scratch test was also performed showing shear failure events of the polymer matrix, fibre/matrix debonding and fibre cracking effects, as expected from the modelling studies.     

Balance of power: dynamic thermal management for Internet data centers

Internet-based applications and their resulting multitier distributed architectures have changed the focus of design for large-scale Internet computing. Internet server applications execute in a horizontally scalable topology across hundreds or thousands of commodity servers in Internet data centers. Increasing scale and power density significantly impacts the data center's thermal properties. Effective thermal management is essential to the robustness of mission-critical applications. Internet service architectures can address multisystem resource management as well as thermal management within data centers.     

Low-threshold room-temperature operation of injectorless quantum-cascade lasers: influence of doping density

The influence of the doping density in the active sections of InP-based injectorless quantum cascade lasers, emitting at 6.8 mum, is investigated. The doping sheet density is varied in the range 2.5-8.6times10¹⁰ cm^-2. Lasing is observed in the whole range, with a threshold current density as low as 1.2 kA/cm² at 300 K for the smallest doping sheet density of 2.5times10 ¹⁰ cm^-2. Further improvement has been made by additionally increasing the number of periods in the active region from 40 to 60. With the same doping level of 2.5times10¹⁰ cm^-2 record low threshold current densities of 0.73 kA/cm² at 300 K were achieved     

Applications of specialized coils for high-resolution MRI on a whole-body scanner

To investigate the application of a mini-coil surface system for high-resolution MRI, 60 volunteers were examined in a 1.5-T whole-body scanner. Two replaceable probe heads were available: a circular 2.5-cm coil and a quadratic 5-cm coil, both of which were placed directly on the skin. The skin layers, Achilles tendon and finger joints were examined with the 2.5-cm coil and a FOV of 25 × 25 mm². A matrix of 256 × 256 pixels resulted in a pixel size of 0.098 × 0.098 mm². For imaging of the carpal tunnel, the 5-cm coil was used in transverse orientation. The FOV was 50 × 50 mm² so that a matrix of 256 × 256 pixels led to a pixel size of 0.195 × 0.195 mm². The resulting spatial resolution permitted visualization of the epidermis, dermis and subcutis, resulting in clear definition of anatomical detail of the musculoskeletal system. MRI measurement of skin-layer thickness did not correlate with histometric data (p<0.05). This discrepancy was due in part to shrinkage of the tumor specimen on histologic preparation. Other causes include the motion artifacts and the limited accuracy of determining thickness on the MRI display unit.     

Contrast media-enhanced magnetic resonance imaging visualizes myocardial changes in the course of viral myocarditis

BACKGROUND: The course of tissue changes in acute myocarditis in humans is not well understood. Diagnostic tools currently available are unsatisfactory. We tested the hypothesis that inflammation is reflected by signal changes in contrast-enhanced magnetic resonance imaging (MRI). METHODS AND RESULTS: We assessed 44 consecutive patients with symptoms of acute myocarditis. Nineteen patients met the inclusion criteria revealing ECG changes, reduced myocardial function, elevated creatine kinase, positive troponin T, serological evidence for acute viral infection, exclusion of coronary heart disease, and positive antimyosin scintigraphy. We studied these patients on days 2, 7, 14, 28, and 84 after the onset of symptoms. We obtained ECG-triggered, T1-weighted images before and after application of 0.1 mmol/kg gadolinium. We measured the global relative signal enhancement of the left ventricular myocardium related to skeletal muscle and compared it with measurements in 18 volunteers. The global relative enhancement was higher in patients on days 2 (4.8+/-0.3 [mean+/-SE] versus 2.5+/-0.2; P<.0001); 7 (4.7+/-0.5, P<.0001); 14 (4.6+/-0.5, P<.0002); and 28 (3.9+/-0.4, P=.009) but not on day 84 (3.1+/-0.3; P=NS). On day 2, the enhancement was focal, whereas at later time points, the enhancement was diffuse. In patients with evidence of ongoing disease, the values remained elevated. CONCLUSIONS: Acute myocarditis evolves from a focal to a disseminated process during the first 2 weeks after onset of symptoms. Contrast media-enhanced MRI visualizes the localization, activity, and extent of inflammation and may serve as a powerful noninvasive diagnostic tool in acute myocarditis.     

Proteins in electric fields and pressure fields: basic aspects

This paper emphasizes the basic aspects of the interactions of chromoproteins at low temperatures with external pressure fields and electric fields. We discuss how the respective spectral properties can be modified and what we can learn from the spectral changes about the thermodynamic, electrostatic, functional and structural properties of proteins. A few examples are discussed in more detail.     

Current in-service inspections of austenitic stainless steel and dissimilar metal welds in light water nuclear power plants

A tendency towards growing requirements for the inspection of austenitic piping can be observed in several countries. In Germany the revised KTA rule demands the UT inspection of austenitic and dissimilar metal welds in piping with diameters of 200 mm or more.On the basis of experience gained from austenitic piping with integranular stress corrosion cracking (IGSCC), longitudinal waves and mode conversion techniques are used. Depending on the geometry, material and grain orientation, spurious signals can be observed which require additional evaluation or analysis measurements.A promising new technique is based on horizontally polarized shear (SH) waves generated by electromagnetic acoustic transducers (EMATs). Investigations in the laboratory and field inspections showed that SH waves are well suited for the detection of longitudinal flaws, especially where the weld can be examined from one side only.For the complete solution of a given inspection problem SH waves can be combined with well-known standard techniques in order to provide redundant information for the characterization and sizing of indications.The investigation of possibilities of SH waves showed that the problem of cast austenitic steel inspection might not be solved using this technique. However, measurements using low frequency UT transducers showed promising results.     

Directional reflectance properties determined by analysis of airborne multispectral scanner data and atmospheric correction

Directional reflectance properties of natural surfaces are very important in the interpretation of remotely sensed data. The analysis of multispectral scanner data shows a distinct dependence on scan angle, wavelength (0.4–1.1 μm), and classes (e.g., bare soil, vegetation). This relationship can be described by polynomials determined by regression methods. Atmospheric effects are computed with a simple model by parametrization of the multiple scattered skylight. The model permits a quick and sufficient estimation of the airlight, depending on the data collection conditions. Comparisons of the scanner data with the corresponding model yield the following results: The differences between airborne and ground measurements are due to atmospheric effects. The directional variation in brightness is mainly caused by the object itself with the exception of short wavelengths and/or a very low albedo. The hue shift of vegetation is essentially produced by the object and modified by the atmosphere. Taking into account the directional reflectance properties in a direction-dependent classification procedure results in an improvement of up to 20% in comparison with algorithms used so far. Quantitative relationships between ground measurements and radiation measurements by airborne sensors including atmospheric effects can be determined with the proposed methods.