Annealing behaviour of amorphous Fe80B20 on continuous heating

Resistance measurements during direct heating of Fe₈₀B₂₀ amorphous alloys indicate phase changes occur at 395, 500, 720 and 840° C. Samples heated to these temperatures, and maintained for five minutes in a neutral atmosphere, show that a hardness maximum occurs at the crystallization temperature of 395° C and that annealing at 500° C produces a material with the same hardness. Above 500° C the microhardness is seen to drop below that of the amorphous alloy. Saturation magnetization measurements show a steady increase following each anneal, up to a temperature of 720° C, and the rate of increase is seen to drop in the range of 720 to 840° C. X-ray diffraction studies show that only a small fraction of the matrix is crystallized following the anneal at 395° C and the transformed phases are -Fe and Fe₃B. Following annealing at 500° C, an increased proportion of -Fe and Fe₃B are observed with complete crystallinity while samples heattreated at 720° C are seen to consist of a three-phase mixture of -Fe, Fe₂₃B₆ and Fe₂B. Annealing at 840° C is seen to produce an equilibrium phase mixture of -Fe and Fe₂B phases. Only in the sample annealed at 395° C is a fraction of the amorphous phase seen to persist, indicating that a 5 min anneal is not sufficient, at this temperature, to induce complete crystallization. These structural features are corroborated by field ion microscope analyses, made at liquid nitrogen temperature in a medium of pure neon, and scanning electron microscopy, and are also consistent with our earlier study involving the isothermal annealing, for various times, of Fe₈₀B₂₀ alloy at 780° C.     

Die therapeutische Interaktion als moralische Vorgabe

Definition of the problem

Hospitals serve the general purpose to improve the health of patients. Health care professionals are a necessary means to achieve that end but have their own more specific professional ends. What is the due relationship between those kinds of ends with respect to the organisation of hospitals?

Arguments

Individual health care in hospitals is delivered by professionals who are dependent upon the hospital??s human, administrative and technical facilities. As organised social entities, hospitals use professionals as the means to an end we normally call health of patients. More precisely, the professional task consists in a specific, namely, therapeutic interaction, an asymmetric relationship between morally equals. Professionals have to explore, interpret and pursue patients?? interests according to their consent. From a moral perspective, this interaction should be kept free from distortion through external incentives which divert the professional??s intrinsic motivation. Although a professional responsibility, the individual professional would be overcharged with this organisational task.

Conclusion

The profession has a responsibility to protect and foster professional behaviour of its members including participation in organising hospitals and the individual professional should engage in organising the profession as a collective agent.     

Spherical sample holders to improve the susceptibility measurement of superparamagnetic materials

The design of two custom sample holders with a spherical cavity for commercial vibrating sample magnetometer systems is described. For such cavities, the magnetization M[over ->] and the internal magnetic field H(i)[over ->] of a sample are both homogeneous. Consequently, the material parameter M(H(i)) of a sample can be determined even for liquids and powders with a high magnetic susceptibility.     

PIXHAWK: A micro aerial vehicle design for autonomous flight using onboard computer vision

We describe a novel quadrotor Micro Air Vehicle (MAV) system that is designed to use computer vision algorithms within the flight control loop. The main contribution is a MAV system that is able to run both the vision-based flight control and stereo-vision-based obstacle detection parallelly on an embedded computer onboard the MAV. The system design features the integration of a powerful onboard computer and the synchronization of IMU-Vision measurements by hardware timestamping which allows tight integration of IMU measurements into the computer vision pipeline. We evaluate the accuracy of marker-based visual pose estimation for flight control and demonstrate marker-based autonomous flight including obstacle detection using stereo vision. We also show the benefits of our IMU-Vision synchronization for egomotion estimation in additional experiments where we use the synchronized measurements for pose estimation using the 2pt+gravity formulation of the PnP problem.     

AH-64D main transmission accessory drive spur gear installation fault detections

The US Army has launched an aggressive program to implement condition based maintenance on its rotary wing assets. Condition Based Maintenance takes advantage of technology developments in the areas of machinery monitoring, signal processing and fault modeling to reduce the cost of ownership through improved maintenance procedures. Documenting the reduction in maintenance burden, cost savings and increased safety through early detection of helicopter faults is an important step in justifying the program. This paper describes a novel technique used to detect a serious fault in the accessory section of the AH-64D Apache main transmission. The technique determines if the primary or secondary clutch system is driving the aircraft accessories through a tachometer speed ratio. The method has identified three aircraft operating on the secondary system allowing Army maintenance crews to replace the affected transmissions and quickly restore the aircraft to operational status.     

Office task effects on comfort and body dynamics in five dynamic office chairs

In the present study, we investigated the effect of office tasks on posture and movements in field settings, and the comfort rating for chair characteristics and correlation with type of task. The tasks studied were: computer work, telephoning, desk work and conversation. Postures, movements, chair part inclinations and comfort rating data were collected from 12 subjects. Computer work showed the lowest physical activity, together with upright trunk and head position and low backrest inclination. Conversation shows the highest activity of head legs and low back together with the highest cervical spine extension. In contrast, desk work provoked the most cervical spine flexion and showed the second lowest activity. The telephoning tasks showed medium activity and the highest kyphosis. Conversation showed the highest backrest inclination. Positive comfort relations were found for computer work and a "swing system" chair, for telephoning and an active longitudinal seat rotation, and for desk work and a chair with a three-dimensionally moveable seat.     

Activity-rest schedules in physically demanding work and the variation of responses with age

Workers in physically demanding occupations require work breaks to recover from exertion. In a laboratory setting, we investigated the impact of ergometer cycling for 7 h in two conditions with an identical total break time but with two different activity-rest schedules. We hypothesised that more frequent but shorter breaks lead to less psychophysical strain and its effects than do less frequent but longer breaks, particularly for older workers. Twenty-nine participants representing three different age groups were tested in both conditions. Heart rate, perceived exertion/tension and feelings of fatigue were assessed and used as dependent variables. Results indicate no general activity-rest differences as well as no age-related differences of break effects under the condition of subjectively equal straining load. However, heart rate was found to be lower at some measurement points in the frequent-short-break condition and perceived exertion was lower in the infrequent-long-break condition. PRACTITIONER SUMMARY: Design of activity-rest schedules in physically demanding occupations is a key issue in the prevention of strain and hence of interest to ergonomists. Our study suggests that breaks during physically demanding work have the same effect if they are frequent and short or infrequent and long, regardless of age.     

Human C-peptide. Part I: Radioimmunoassay

Synthetic human C-peptide bearing a Tyrosine group at its amino end is labelled with 125iodine using chloramin T or hydrogen peroxide and lactoperoxidase. The results are compared applying both methods. Antiserum to synthetic human C-peptide (without Tyrosine) which was partially compared to rabbit albumin, is raised in guinea pigs and goats. Goats show to be superior to guinea pigs concerning antibody production. The so-called "hook effect" phenomenon is observed in setting up the standard curves for the radioimmunoassay. Monotonically decreasing standard curves are obtained on dilution of antiserum with a high antibody titer which was produced by repeated immunization in goats. Free C-peptide and C-peptide bound to antiserum are separated with the anxion exchange resin Amberlite. Using this separation technique we excluded unspecific binding of labelled C-peptide to protein fractions in serum of diabetics. The sensitivity of our radioimmunoassay is approx. 0.3 ng C-peptide/ml serum. Intra- and interassay variability are below 10%. Human proinsulin is the only substance found to crossreact with the antiserum.     

Initiation of tantalum oxide pores grown on tantalum by potentiodynamic anodic oxidation

The initiation and growth of porous oxide on Ta was investigated in mixed H₂SO₄/HF electrolytes. Under selected potentiodynamic anodic oxidation conditions the formation of nearly uniform porous Ta₂O₅ layer was observed. The porous Ta₂O₅ layers consist of self-organized pore arrays with single pore diameters ranging from 2 to 10 nm. The morphology and the thickness of the layer depend strongly on the applied potential, the scan rate and on HF presence. The composition of the porous oxide layer is Ta₂O₅.     

MICAST — The effect of magnetically controlled fluid flow on microstructure evolution in cast technical Al-alloys

The MICAST research program focuses on a systematic analysis of the effect of convection on the microstructure evolution in cast Al-alloys. The experiments within MICAST are carried out under well defined thermally and magnetically controlled, convective boundary conditions and analyzed using advanced diagnostics and theoretical modeling, involving phase field simulation, micro-modeling and global simulation of heat and mass transport. The MICAST team uses as a model material the Al-Si base alloys. This paper gives a brief overview on recent experimental results of the MICAST team on the effect of rotating magnetic fields on microstructure in AlSi alloys.