GoAhead Web Server在嵌入式远程监控系统中的应用

文章对Go Ahead Web Server的基本特点和运行环境进行了介绍,结合嵌入式远程监控系统的现状,将嵌入式开发平台、Linux操作系统、Go Ahead Web Server和I n t e r n e t融合在一起,设计了一个控制电压转换的嵌入式远程监控系统。应用结果表明,Go Ahead Web Server反应迅速,可靠稳定,在实际应用中具有可行性,对嵌入式产品的管理和控制可以得到满意的效果。     

时间戳服务在信息系统审计的研究应用

联网审计后,审计的审计线索由原来纸质的资料转为为计算机的电子数据,电子数据存在被篡改或伪造的可能,不能确保其真实性和可靠性,本文研究的是在被审计单位原始数据生成时,采用时间戳服务对其实时签名,来保证电子数据的真实性和可靠性。     

基于路由标记的分布式信息检索

文章对分布式信息检索中通常采用的洪泛策略进行分析,发现其容易重复转发相同消息,导致产生大量冗余通信,造成网络拥塞等问题。提出采用基于路由标记的分布式信息检索策略,以减少冗余消息的产生并避免网络拥塞,最后以实例进行两种策略的对比分析,并通过理论推导证明了后者的有效性。     

Effects of the reinforcement and toughening of acrylate resin/CaCO3 nanoparticles on rigid poly(vinyl chloride)

Novel composite particles based on nanoscale calcium carbonate (nano‐CaCO₃) as the core and polyacrylates as the shell were first synthesized by in situ encapsulating emulsion polymerization in the presence of the fresh slush pulp of calcium carbonate (CaCO₃) nanoparticles. Subsequently, these modified nanoparticles were compounded with rigid poly(vinyl chloride) (RPVC) to prepare RPVC/CaCO₃ nanocomposites. At the same time, the effects of the reinforcement and toughening of these modified nanoparticles on RPVC were investigated, and the synergistic effect of modified nanoparticles with chlorinated polyethylene (CPE) was also studied. The results showed that in the presence of nano‐CaCO₃ particles, the in situ emulsion polymerization of acrylates was carried out smoothly, and polyacrylates successfully encapsulated on the surface of nano‐CaCO₃ to prepare the modified nanoparticles, breaking down nano‐CaCO₃ particle agglomerates, improving their dispersion in the matrix, and also increasing the particle–matrix interfacial adhesion. Thus, the effects of the reinforcement and toughening of these modified nanoparticles on RPVC were very significant, and the cooperative effect of the nanoparticles with CPE occurred in the united modification system. Scanning electron microscopy analyses indicated that large‐fiber drawing and network morphologies coexisted in the system of joint modification of nanoparticles with CPE. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3940–3949, 2007     

运动发酵单胞原生质球的形成和再生

运动发酵单胞(Zymomonas mobilis)ATCC29191菌株在含1～3g/L甘氨酸的液体培育12小时的菌体,用含20g/L的溶菌酶溶液处理12小时,可以稳定得到80％～90％的原生质球。原生质球稀释后在底层再生培养基上涂布,上面复盖一层半固体培养基,30℃培养5～7小时,再生率可达10~(-2)水平。     

Model for drying during fluidized-bed combustion of wet low-rank coals

An unsteady state heat conduction model with a convective boundary condition is proposed for the drying of low-rank, high-porosity coals, such as lignites, during fluidized-bed combustion. The drying front is assumed to be the receding surface of a wet core. The solution technique for this moving boundary problem is based on the heat balance integral approach with immobilization of the moving boundary by a change in space variable. The governing cubic equation describing the drying curve in dimensionless form may be solved easily by the Newton—Raphson method. The model predictions are compared with experimental data for Mississippi lignite with excellent agreement. A correlation for estimation of total drying time is proposed. The temperature profiles obtained may be used for the study of the coupled drying and devolatilization in fluidized-bed combustors. The profiles could also be of importance in the study of formation of fissures/cracks in lignites subjected to intense heating conditions encountered during fluidized-bed combustion.     

Thermal and crystallization characteristics of poly(ethylene terephthalate) with poly(oxybenzoate‐p‐trimethylene terephthalate) copolymer

Poly(ethylene terephthalate) (PET) was blended with two different poly(oxybenzoate‐p‐trimethylene terephthalate) copolymers, designated T28 and T64, with the level of copolymer varying from 1 to 15 wt %. All samples were prepared by solution blending in a 60/40 (by weight) phenol/tetrachloroethane solvent at 50°C. The crystallization behavior of the samples was studied by DSC. The results indicate that both T28 and T64 accelerated the crystallization rate of PET in a manner similar to that of a nucleating agent. The acceleration of PET crystallization rate was most pronounced in the PET/T64 blends with a maximum level at 5 wt % of T64. The melting temperatures for the blends are comparable to that of pure PET. The observed changes in crystallization behavior are explained by the effect of the physical state of the copolyester during PET crystallization as well as the amount of copolymer in the blends. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1599–1606, 2002     

Radiation flux distribution over solar images formed on the focal plane by a paraboloidal reflector with tracking errors

The radiation flux distribution of off-centered solar images formed by a sun-tracking paraboloidal reflector is theoretically analyzed for several tracking error angles using Jose’s sunshape equation and assuming a specularly reflecting surface without taking meteorological conditions into consideration. The results are printed out by computer in the form of shade density maps to bring out a clear contrast to the low and high flux areas of a full image.     

High catalytic activity of PdOx/MnO2 for CO oxidation and importance of oxidation state of Mn

PdO_x/MnO₂ has been examined as a catalyst for CO oxidation using a conventional flow reactor at reaction temperatures between 50 and 150°C. In the reaction conditions of GHSV (gashourlyspacevelocity) of 1.22 × 10⁵/h and CO concentration of 2000 ppm, PdO_x/MnO₂ showed higher catalytic activity compared with PdO_x/Mn₂O₃, which had been previously reported as an effective catalyst due to the cooperative action of Pd and Mn₂O₃ for this reaction. The reason for higher activity of PdO_x/MnO₂ than PdO_x/Mn₂O₃ has been investigated using TPR (temperatureprogrammed reduction) and XPS studies. TPR showed that PdO_x/MnO₂ could be reduced by CO at much lower temperature than PdO_x/Mn₂O₃. During the experiment of reduction and oxidation, XPS showed that the valence of Mn in the PdO_x/MnO₂ was between 4+ and 3+, which is higher than that of Mn in the PdO_x/Mn₂O₃ catalyst of which the valence has been reported to be between 3+ and 2+. It is known that in this catalyst system the support supplies oxygen onto Pd, where the oxidation occurs with adsorbed CO, and the ability of the support to provide oxygen improves the performance of the catalyst. Therefore, it was concluded that the readiness of MnO₂ to be reduced with maintaining a higher oxidation state showed higher CO oxidation activity than Mn₂O₃ as support for PdO_x.     

Solvent fractionation of petroleum pitch for mesophase formation

Petroleum pitch (Ashland A240) has been subjected to thermal treatment and solvent fractionation to produce refined pitches to be evaluated as impregnants for C-C composites. The solvent fractions were obtained by sequential Soxhlet extraction with solvents such as hexane, benzene, and pyridine. Thermal treatment to 408 °C produced a mesophase pitch (≈50% mesophase); an appreciable portion of the mesophase was soluble in strong solvents. There were substantial differences in chemical composition and in pyrolysis behaviour of the fractions. As the depth of fraction increased, the pyrolysis yield and bloating increased, and the microstructure of the coke became finer until glassy microconstituents were formed in the deepest fractions.