The importance of electrochemistry-related etching in thegate-groove fabrication for InAlAs/InGaAs HFETs

For the first time, the surface metal on nonalloyed ohmic electrodes is found to significantly change the profiles of gate grooves, when resist openings are employed to monitor drain current during wet-chemical gate recess for sub-micron InAlAs/lnGaAs heterojunction field-effect transistors (HFETs). The surface metal of Ni enhances the etching rate in comparison with that in the absence of electrodes by a factor of 4 and 10, laterally and vertically, which is favorable to fabricate deep gate grooves with small side etching. The Pt surface metal, however, leads to preferential etching of InGaAs over InAlAs, which can be useful to realize large side etching. The existence of an electrochemistry-related etching component, which arises when the ohmic electrodes are present during recess etching, is considered to be responsible for these behaviors     

Leiomyomatosis peritonealis disseminata. Two case reports

AIM: To study the action of quercetin (Que) on inhibiting platelet aggregation. METHODS: Active oxygen free radicals produced by xanthine/xanthine oxidase (Xan/XO) reaction was used, platelet aggregation was determined by the turbidimetric method, and the Xan/XO oxyradicals generating reaction by luminol-dependent chemiluminescence (Che) method. RESULTS: Active oxygen free radicals enhanced the platelet aggregation induced by ADP 1.6 mumol.L-1. The rate of maximal aggregation increased from 29%-38% for ADP to 59%-70% for ADP + Xan/XO. The enhancement was abolished by the treatment of platelet-rich plasma (PRP) with Que 650 mumol.L-1 or hydrocortisone (Hyd) 900 mg.L-1. Both Que and Hyd scavenged the active oxyradicals in vitro. The Che was decreased by 75.7% (Que 4 mumol.L-1) and 79.0% (Hyd 900 mg.L-1) as compared with control. CONCLUSION: Active oxygen free radicals participated in the platelet aggregation, and scavenging oxyradicals by Que was one of mechanisms of inhibiting platelet aggregation.     

Analysis of a resonant-cavity enhanced GaAs/AlGaAs MSMphotodetector

The authors have developed a 2-D device simulator for heterostructure metal-semiconductor-metal (MSM) photodetectors. They have incorporated a model of multilayer optics into the simulator and used it to analyze the temporal response of a resonant-cavity enhanced heterostructure with a confining buffer layer and a distributed Bragg reflector (DBR). The authors show that through fine tuning the layer thicknesses, optical resonance enhancement of the light absorption can be obtained     

Performance analysis of the bidirectional associative memory and animproved model from the matched-filtering viewpoint

This paper discusses the bidirectional associative memory (BAM) model from the matched-filtering viewpoint and offers it a new interpretation. Our attention is focused on the problem of stability and attractivity of equilibrium states. Several sufficient and/or necessary conditions are presented. To improve the BAM performance, an exponential function is used to enhance the correlations between the binary vectors of the retrieval key and that of the stored pattern similar to the key. The modified model is shown to be asymptotically stable. Theoretical analysis and simulation results demonstrate that the modified model performs much better than the original BAM in terms of memory capacity and error correction capability.     

Novel algorithms for shared segment protection

The major challenges in designing survivable schemes are how to allocate a minimal amount of spare resources (e.g., bandwidth) using fast (e.g., polynomial-time) algorithms, and, in case a failure occurs, to be able to recover quickly from it. All existing approaches invariably make tradeoffs. We propose novel shared segment protection algorithms which make little or no compromise . We develop an elegant integer linear programming (ILP) model to determine an optimal set of segments to protect a given active path. Although the ILP approach is useful for a medium-size network, it is too time consuming for large networks. Accordingly, we also design a fast heuristic algorithm based on dynamic programming to obtain a near-optimal set of segments. Although the heuristic algorithm has a polynomial time complexity, it can achieve a bandwidth efficiency as high as some best-performing shared path protection schemes and, at the same time, much faster recovery than these shared path protection schemes. The proposed scheme is also applicable to a wide range of networking technologies, including Internet Protocol and wavelength-division multiplexing networks under the generalized multiprotocol label switched framework.     

Occlusion-resistant camera design for acquiring active environments.

In this article, we present a detailed theoretical analysis and a prototype implementation of a family of cameras designed with the explicit goal of detecting and removing interfering dynamic occluders in real time, during live capture, as opposed to fixing the resulting artifacts a posteriori. Such an early-acquisition approach improves efficiency: more valid samples are acquired faster without worrying about moving occluders. One option for designing a camera to be unaffected by moving occluders is to sample through the occluder, but true x-ray-like vision is technically impractical. Another option is to sample around the occluder using a camera with a large effective aperture, but such an approach requires a bulky acquisition device. Yet another possibility of sampling around an occluder is to rely on second and higher order reflected rays that indirectly sample surfaces not directly visible. However, devising an acquisition device sufficiently sensitive and efficient to capture large environments using reflected rays will remain challenging for the foreseeable future.     

川东地区长兴组缝洞型储层的识别

本文针对四川东部地区上二叠统长兴组(P_2~2)缝洞型储层的低孔、低渗及非均质性等特点,分析了影响这类储层识别的主要因素,提出了利用现有的地球物理测井手段定性识别储层的指标和定量综合识别储层的方法,这可望提高测试成功率。     

A three-dimensional non-epitaxial atomistic growth model for thin-film deposition: effect of surface mobility

The effect of the atomic mobility on a film surface has been studied by using a three-dimensional atomistic thin-film deposition model which simulates three-dimensional thin-film images, surface profiles and cross-sectional area pictures. In addition, quantitative results of surface RMS roughness, average film thickness, atomic coordination number and its distribution, and solid fraction of the deposited thin films, were obtained from the simulations. When the film surface mobility increased from 0.3 to 3.0, RMS roughness decreased from 6.5 to 1.1, solid fraction increased from 0.27 to 0.56 and average film thickness decreased from 40 to 28, due to the reduction of the voids within the film. The full-width half magnitude of the atomic coordination distribution became narrower indicating the increased degree of crystallization. With increase in surface mobility crossing the boundary to 1.5, the film evolved from a porous or loose columnar structure with voids, to a densely packed fibrous grain structure which can be categorized by the zone structure models.