Cerebral Hyperperfusion after Revascularization Inhibits Development of Cerebral Ischemic Lesions Due to Artery-to-Artery Emboli during Carotid Exposure in Endarterectomy for Patients with Preoperative Cerebral Hemodynamic Insufficiency: Revisiting the “Impaired Clearance of Emboli” Concept

The purpose of the present study was to determine whether cerebral hyperperfusion after revascularization inhibits development of cerebral ischemic lesions due to artery-to-artery emboli during exposure of the carotid arteries in carotid endarterectomy (CEA). In patients undergoing CEA for internal carotid artery stenosis (≥70%), cerebral blood flow (CBF) was measured using single-photon emission computed tomography (SPECT) before and immediately after CEA. Microembolic signals (MES) were identified using transcranial Doppler during carotid exposure. Diffusion-weighted magnetic resonance imaging (DWI) was performed within 24 h after surgery. Of 32 patients with a combination of reduced cerebrovascular reactivity to acetazolamide on preoperative brain perfusion SPECT and MES during carotid exposure, 14 (44%) showed cerebral hyperperfusion (defined as postoperative CBF increase ≥100% compared with preoperative values), and 16 (50%) developed DWI-characterized postoperative cerebral ischemic lesions. Postoperative cerebral hyperperfusion was significantly associated with the absence of DWI-characterized postoperative cerebral ischemic lesions (95% confidence interval, 0.001–0.179; p = 0.0009). These data suggest that cerebral hyperperfusion after revascularization inhibits development of cerebral ischemic lesions due to artery-to-artery emboli during carotid exposure in CEA, supporting the “impaired clearance of emboli” concept. Blood pressure elevation following carotid declamping would be effective when embolism not accompanied by cerebral hyperperfusion occurs during CEA.     

Reactive processing of thermoset/thermoplastic blends: A potential for injection molding

Poly(2,6-dimethyl-1,4-phenylene ether) (PPE) is an engineering plastic with high heat distortion temperature. Melt processing of neat PPE is usually accompanied with thermal degradation. The degradation problem is solved by blending with polystyrene to reduce the processing temperature. We propose an alternative using triallylisocyanurate (TAIC). TAIC is a low viscosity liquid that can be cured by peroxide, e.g. α,α′-bis(t-butylperoxy-m-isopropyl)benzene (PBP), to provide a thermoset. The PPE/TAIC mixture was shown to have the upper critical solution temperature (UCST) type phase behavior. At the single-phase regime above UCST and below the cure temperature (∼180°C for PBP), the mixture had a low viscosity, less viscous than a conventional thermoplastic such as PC and PP. That is, a nice window for injection molding was available, e.g., at 100°C to 160°C for a 50/50 blend. After injecting into a hot mold set at cure temperature, the blend cured in a short time (∼80% conversion in 5 min). Then the molded and partly cured material kept its shape and dimensions during post-cure in a hot chamber at higher temperature (e.g. 250°C). Using transmission electron microscopy and dynamic mechanical analyses, it was shown that the cured blend had a bicontinuous two-phase structure with periodic spacings of ∼30 nm, suggesting a structure formation via a spinodal decomposition driven by the increase in molecular weight of TAIC during cure. The cured material showed excellent flexural strength and high chemical resistance.     

Interconnection reliability and interfacial structure between Au alloy bump and Al pad using ultrasonic bonding*

Flip chip technology with Au bumps on a substrace has been widely applied to electronic equipment such as smart phones. The purposes of this study are to examine the effect of Al pad thickness on the bondability of flip chip using ultrasonic bonding and to clarify interfacial structures between Au alloy bumps and Al pads by ultrasonic bonding compared before and after a thermal cycle test. Suitable Al thickness for excellent initial Au/Al bonding without chip cracking are 0.8 μm because a thin Al layer could not reduce stress to a chip under an Al pad during the ultrasonic bonding process. Intermetallic compounds between the Au alloy bump and chip after reflows consisted of five Au-Al layers, and a pure Al layer remained. On the other hand, after the temperature cycle test at 218/423 K, intermetallic compounds between the Au alloy bump and chip were changed into two kinds of Au-Al layers, so a pure Al layer did not exist. In addition, if thick intermetallic compound layers existed around the bonding region, bondability deteriorated easily by thermal stress due to a thermal cycle test, therefore the open failure rate was rising when the Au thickness was 1.2 μm.     

Patterning of Non-Linear Optical Crystals in Glass by Laser-Induced Crystallization

This paper reports recent progress in the patterning of non-linear optical crystals on the glass surface by laser irradiation. Two techniques for the writing of crystal lines have been developed, i.e., rare-earth (samarium) atom heat processing and transition metal atom heat processing, in which a continuous wave Nd:YAG laser (wavelength: λ=1064 nm) is irradiated to the glasses containing rare-earth (RE: Sm³⁺, Dy³⁺) ions or transition metal (TM: Ni²⁺, Fe²⁺, V⁴⁺) ions. The writing of crystal lines such as β-BaB₂O₄, Sm _x Bi_{1− x} BO₃, and Ba₂TiGe₂O₈ showing second harmonic generations has been successful. It is clarified from the azimuthal dependence of second harmonic intensity and polarized micro-Raman scattering spectra that crystal lines consist of highly oriented crystals along the crystal line growth direction. It is also possible to write two-dimensional crystal bending or curved lines by just changing the laser scanning direction. The mechanism of the laser-induced crystallization has been proposed.     

Profiling and Imaging of Phospholipids in Brains of Abcd1‐Deficient Mice

ABCD1 is a gene responsible for X‐linked adrenoleukodystrophy (X‐ALD), and is critical for the transport of very long‐chain fatty acids (VLCFA) into peroxisomes and subsequent β‐oxidation. VLCFA‐containing lipids accumulate in X‐ALD patients, although the effect of ABCD1‐deficiency on each lipid species in the central nervous system has not been fully characterized. In this study, each phospholipid and lysophospholipid species in Abcd1‐deficient mice brains were profiled by liquid chromatography‐mass spectrometry. Among the phospholipid and lysophospholipid species that are significantly more enriched in Abcd1‐deficient mice brains, VLCFA were present in 75, 15, 5, 4, and 1 species of phosphatidylcholine, phosphatidylethanolamine, sphingomyelin, lysophosphatidylcholine, and lysophosphatidylethanolamine, respectively. Most VLCFA were incorporated at the sn‐1 position of phosphatidylcholine and phosphatidylethanolamine. Among the phospholipid species that are significantly less enriched in Abcd1‐deficient mice brains, odd‐numbered saturated or mono‐unsaturated fatty acyl moieties are contained in all phosphatidylcholine species. In addition, a number of phosphatidylglycerol, phosphatidylinositol, and phosphatidylserine species contained highly unsaturated fatty acyl moieties. Intriguingly, 44:1 phosphatidylcholine with VLCFA was mainly distributed in the gray matter, such as the cortex, but not in the white matter in the cerebrum and cerebellum. These results show that ABCD1‐deficiency causes metabolic alternation of long‐chain fatty acids and VLCFA. Moreover, our results imply a molecular mechanism for the incorporation of saturated or monounsaturated VLCFA into the sn‐1 position of phospholipids, and also indicate that the distribution of phospholipids with VLCFA may correlate with the development of X‐ALD.     

Configuration optimization of clamping members of frame-supported membrane structures

A method is presented for configuration optimization of frames that have specified properties on nodal displacements, stresses, and reaction forces against static loads. The conventional ground structure approach is first used for topology optimization. A feasible solution with a small number of members satisfying all the design requirements except the stress constraints is obtained by assigning artificially small upper-bound displacement, or by penalizing the stiffness of a thin member. This way, the well-known difficulty in topology optimization under stress constraints is successfully avoided. The nodal locations and cross-sectional areas of the feasible solution are next optimized to obtain an approximate optimal configuration under stress constraints. The proposed method is applied to the design of self-fastening clamping members for membrane structures modeled using frame elements. An optimization result is also presented for a clamping member that adjusts deformation of membrane by applying a clamping force with a vertically attached bolt.     

APPLICATION OF THE UNIFIED STATISTICAL MATERIAL DATABASE FOR DESIGN AND LIFE／RISK ASSESSMENT OF HIGH TEMPERATURE COMPONENTS

Statistical manipulation of material data was conducted for probabilistic life assessment or risk-based design and maintenance for high temperature components of power plants. To obtain the statistical distribution of material properties, dominant parameters affecting material properties are introduced into normalization of statistical variables. Those parameters are hardness, chemical composition, characteristic microstructural features and so on. Creep and fatigue properties are expressed by normalized parameters and the unified statistical distributions are obtained. These probability distribution functions show good coincidence statistically with the field database of steam turbine components. It was concluded that the unified statistical baseline approach is useful for the risk management of components in power plants.     

Combination of cytomegalovirus enhancer with human cellular promoters for gene-induced chondrogenesis of human bone marrow mesenchymal stem cells

High-expression plasmid vectors for human mesenchymal stem cells (MSCs) were constructed by combination of cytomegalovirus immediate-early enhancer with cellular promoters. MSCs transfected with the vector showed higher transgene production of a cytokine, which increased the differentiation level to chondrocytes.     

Proposal for a benchmark model of a laminated iron core and a large‐scale and highly accurate magnetic analysis

This paper describes a benchmark model proposed for the clarification of the characteristic of various methods for modeling the laminated iron core. In order to obtain a reference solution of the benchmark model, a large‐scale nonlinear magnetostatic field analysis with a mesh fine enough to represent the microscopic structure of the laminated iron core is carried out by using the hybrid finite element–boundary element (FE‐BE) method combined with the fast multipole method (FMM) based on diagonal forms for translation operators. The computational costs and accuracy of two kinds of homogenization methods are discussed, comparing them with the reference solution. As a consequence, it is verified that the homogenization methods can analyze magnetic fields in laminated iron core within acceptable computational costs. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 170(1): 26–35, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20809     

Development of rapid hygrothermal pasteurization using saturated water vapor

We developed a novel rapid hygrothermal pasteurization (RHP) method using saturated water vapor with a dew point of 100 °C. In the present study, the effects of RHP on microbiological quality and quality attributes such as color changes, firmness and ascorbic acid content on many fresh-cut fruits and vegetables (cabbage, cucumber, carrot, cherry tomato, bell pepper, strawberry, pineapple and melon) were investigated. The RHP was performed within a second by free-falling samples through a cylindrical processing chamber filled with steam. The RHP resulted in a 0.7–2.0 log order reduction in the numbers of naturally inoculated mesophilic bacteria. Furthermore, the RHP induced no significant changes in color and firmness of samples, except on the leafy vegetable, cabbage. Ascorbic acid was also retained approximately 80% and above. These results indicate that the RHP is a clean and effective method for decontaminating mesophilic bacteria on fresh fruits and vegetables with minimal changes in quality.Industrial relevanceIn fresh-cut industry, an effective and risk-free decontamination technology is required for use in place of a conventional method, washing by chlorine that can produce carcinogenic chlorinated by-products. In this study, the rapid hygrothermal pasteurization (RHP) method using saturated water vapor was invented and their ability for applying minimal processing was evaluated. The results showed that RHP, without using chemicals, can reduce microorganism load and preserve quality attributes in many kinds of fresh-cut fruits and vegetables. Therefore, RHP could be used as a novel method, which can be generally applicable to fresh-cut fruits and vegetables in the food industry.