Human antibody response to Helicobacter pylori lipopolysaccharide: presence of an immunodominant epitope in the polysaccharide chain of lipopolysaccharide

We have examined the antibody response to Helicobacter pylori lipopolysaccharides (LPS) in humans. We used sera from patients with gastroduodenal diseases and healthy adults infected or not infected with H. pylori. Data from the experiments for antibody binding to LPS suggested that the polysaccharide chains from many H. pylori strains showed high immunogenicity in humans. Sera from most (above 70%) H. pylori-infected individuals contained immunoglobulin G (IgG) antibodies against the polysaccharide region highly immunogenic H. pylori LPS. The IgG titers of individual serum samples that reacted strongly with highly immunogenic LPS were quite similar (r2 = 0.84 to 0.98). The results suggest wide distribution among H. pylori strains of a highly antigenic epitope in the polysaccharide moieties of their LPS. Also, the similarity in the titers of individual serum samples against highly immunogenic LPS points to the existence of epitopes sharing a common structural motif. However, some strains showed low antigenicity, even those with polysaccharide-carrying LPS. The dominant subclass of IgG that reacted with the highly immunogenic LPS was IgG2, which was preferentially raised against polysaccharide antigens. Recently, a structure that mimics that of the Lewis antigens was identified in the O-polysaccharide fraction of H. pylori LPS; however, no correlation between antigenicity of the polysaccharide chain in humans and the presence of Lewis antigens was found. The IgA and IgM titers against H. pylori LPS seemed to be mostly nonspecific and directed against lipid A. In a few cases, however, sera from individuals infected with H. pylori gave strong IgA and IgM titers against the highly immunogenic polysaccharide. In conclusion, the LPS of many H. pylori strains possess an antigenic epitope in their polysaccharide regions that is immunogenic in humans. However, our results show that the antigenic epitope is unlikely to be immunologically related to structures mimicking Lewis antigens.     

Endobronchial hamartoma treated by an Nd-YAG laser: report of a case

Endobronchial hamartomas are only rarely encountered. They cause irreversible lung damage due to bronchial obstruction if not diagnosed early and treated properly. Among the various treatments for this rare disease, a surgical resection remains the most popular. We herein report a case of a 53-year-old man presenting with an endobronchial hamartoma which was successfully excised by laser irradiation via a rigid bronchoscope, along with a review of 113 patients with this disease reported in the literature.     

An approach toward integrated algorithm information system

Computational algorithms being developed and used in scientific research processes have gone on increasing by rapid advance of computer technology and computational techniques. These algorithms have generally been distributed and it has not always been easy for general users to find the most suitable ones for their specific problem solving.

In this paper, an approach toward integrated algorithm information system is presented. The system is intended to store the algorithm information to be used in a wide range of scientific fields, and to provide the information corresponding to requests of general users with various motivations. The algorithm information is represented in a conceptual framework consisting of three sets of attributes which are selected to describe essential features of the algorithm. The experimental system shows that the information retrieval method is effective not only for the dissemination of the algorithm information but also for its organization and maintenance. However, it is pointed out and discussed that some techniques in artificial intelligence researches should be required for more selective and critical searches using implicit information among algorithms.     

Analysis of phenmedipham in agricultural products by HPLC

An analytical method was developed for the determination of phenmedipham (PM) in agricultural products using reversed-phase high-performance liquid chromatography with UV detection. A sample was extracted with acetonitrile, and the acetonitrile layer was separated by salting-out. The acetonitrile phase was isolated and evaporated. The extract was dissolved in diethyl ether-hexane (1 : 1), and then cleaned up on a Florisil column. The column was washed with diethyl ether-hexane (1 : 1), and PM was eluted with acetone-hexane (3 : 7), and the eluate was evaporated. The residue was dissolved in acetone-hexane (2 : 8), and the sample solution was cleaned up on SAX/PSA cartridge. The SAX/PSA cartridge was washed with acetone-hexane (2 : 8), and PM was eluted with acetone-hexane (3 : 7). If required, the eluate of the Florisil column was cleaned up with SAX/PSA and ENVI-Carb/ NH2 cartridges. The SAX/PSA cartridge was washed with acetone-hexane (2 : 8), and connected to be ENVI-Carb/NH2 cartridge. The cartridges were washed with acetone-hexane (3 : 7), and then the SAX/PSA cartridge was removed. PM was eluted with acetonitrile-toluene (3 : 1) from the ENVI-Carb/NH2 cartridge. PM in the eluate was separated isocratically on an ODS column (4.6 mm i.d. x 150 mm, 5 microm) using acetonitrile-water (6 : 4) as a mobile phase (flow-rate 1.0 mL/min, temp. 40 degrees C), with monitoring at 235 nm. The calibration curve was linear from 0.005 microg/mL to 10 microg/mL of PM. The recoveries of PM from eight kinds of agricultural products spiked at levels of 0.1 and 0.02 microg/g were 80.8-98.7%. The determination limit was 0.01 microg/g.     

Extraction mechanism of copper by versatic 10

The extraction mechanism of copper from an aqueous ammonia-ammonium nitrate mixture by an n-hexane solution of Versatic 10 was studied from the standpoints of the equilibrium distribution of copper between aqueous and organic phases, the aqueous solubility and interfacial adsorption equilibrium of Versatic 10 and the extraction rate of copper.The equilibrium relations of the distribution of copper and the aqueous solubility and the interfacial adsorption of Versatic 10 were interpreted quantitatively and these equilibrium constants were evaluated.The extraction rate of copper was found to be proportional to the copper concentration in the aqueous phase, inversely proportional to the hydrogen ion concentration and independent of the Versatic 10 concentration in the organic phase. From the experimental results of the extraction rate and the interfacial adsorption equilibrium, it was inferred that the extraction rate was controlled by the elementary reaction between the copper ion in the aqueous phase and the anionic species of Versatic 10 adsorbed at the interface.     

A useful technique for the point Successive Over Relaxation method

By gradually decreasing the relaxation parameter in the SOR method, it is shown that the number of iterations required for the unknown variables to converge to reasonable values can be reduced. This practical SOR method can also be applied for composite substances with arbitrary geometry. When applying the method to a simple example of a composite substance, the iteration number was reduced by about 20% as compared with the ordinary SOR method using an optimal relaxation parameter.     

Application of step‐response test for evaluation of uncertainty of standard measuring system for lightning‐impulse high voltage

In evaluating the uncertainty of the standard measuring system for lightning‐impulse high voltages, which is composed of a standard voltage divider, a digital recorder, and calibrators, step‐response tests of the standard voltage divider may be useful. In this paper, a convolution algorithm is employed to calculate the output impulse voltage waveforms from measured step‐response waveforms. The uncertainties of peak‐value measurement due to the influence of the nominal epoch, uncertainty of the peak‐value measurement due to dispersion of the AC scale factor, and uncertainty of the virtual front‐time measurement due to long‐term stability are evaluated. Furthermore, the error of the virtual front time of the output waveforms is discussed. The front part of the step‐response waveform, t≤ T₃₀%, does not influence the error of the virtual front time. Therefore, for the standard voltage divider, the step‐response parameters, that is, the experimental response time, partial response time, settling time, and overshoot, have almost nothing to do with the error of the virtual front time. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 180(2): 24–32, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21279     

Surface temperature of Pd/C catalyst under microwave irradiation in dechlorination process of PCBs

In recent years, a new effective method of processing for polychlorinated biphenyls (PCBs) has been developed: It enables PCBs to become harmless by dechlorinating them using a 2.45 GHz microwave (MW). Compared with conventional thermal heating, MW processing hardly produces any harmful byproduct materials, and has high reaction velocity. To investigate such promotion of chemical reaction by MW irradiation, the surface temperature of the catalyst is measured by an infrared camera just after the irradiation by MW. It is recognized that there are some heated regions on the catalyst and the temperature is not uniform. It is natural to say that chemical reaction is promoted well on such a heated region. Copyright © 2009 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Dielectrics loss of PCBs leading to microwave heating

A new effective processing for polychlorinated biphenyls (PCBs) has been recently developed. PCBs become harmless by dechlorination using 2.45 GHz-microwave (MW). To investigate such chemical reaction by MW irradiation, the dielectric loss of pure PCBs solutions and an isomer mixture in MW band is measured. Some PCBs and isopropyl alchol, added as a source of hydrogen supply have high dielectric loss in MW band. This suggests that MW heats PCBs and isopropyl alchol, and then the temperature of the solvent consisting mainly of insulating oil rises by the thermal conduction. Copyright © 2009 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.