Small-angle X-ray scattering studies on melting and recrystallization behaviors of poly(oxyethylene) crystallites in poly(d,l-lactide)/poly(oxyethylene) blends

Direct determination of the discrete distribution for crystalline lamellar thickness has been performed for poly(d,l-lactic acid)/poly(oxyethylene) (PDLLA/PEG) blends by conducting small-angle X-ray scattering (SAXS) measurements using synchrotron radiation. The PDLLA used was an random (racemic) copolymer of bio-based poly(l-lactic acid) (PLLA) and poly(d-lactic acid) (PDLA) with the lactide monomer ratio of l:d = 50:50. It is known that PLA is miscible with PEG in the amorphous state. In the current paper, we report comprehensive results on structural analyses of PDLLA/PEG blends in the course of heating and cooling process using SAXS to elucidate the change in the thickness distribution of the lamellae. As a consequence, it was found that the distribution of the lamellar thickness moves toward the larger value (in other words, lamellar thickening) as temperature approaches the melting point. Typically, the thickness distribution was dispersed in the range of 10–20 nm at room temperature and it changed toward 40 nm in the vicinity of the melting temperature. To the best of our knowledge, this is the first report of direct determination of the discrete distribution for the crystalline lamellar thickness and their in-situ changes in the course of the lamellar thickening process. As a result, the lamellar thickening was found to occur at much lower temperature for the blend samples with 10% and 20% of PDLLA contents as compared to the PEG 100% sample. This phenomenon can be ascribed to the melting point depression owing to the miscibility between PEG and PDLLA. Thereby, thinner lamellae were melted and thicker ones appeared at much lower temperature for the blends than for the PEG 100% sample. As for the average repeating distance (long period) of the lamellar stacks, an abrupt increase similar to the critical divergence was observed (from 25 nm to 50 nm) in the heating process. Not only for the melting behavior but also in the course of recrystallization, change in the lamellar-thickness distribution was uncovered, which shows strong hysteresis depending on what temperature the sample was cooled down from.     

Identification of Neoantigens in Cancer Cells as Targets for Immunotherapy

The clinical benefits of immune checkpoint blockage (ICB) therapy have been widely reported. In patients with cancer, researchers have demonstrated the clinical potential of antitumor cytotoxic T cells that can be reinvigorated or enhanced by ICB. Compared to self-antigens, neoantigens derived from tumor somatic mutations are believed to be ideal immune targets in tumors. Candidate tumor neoantigens can be identified through immunogenomic or immunopeptidomic approaches. Identification of neoantigens has revealed several points of the clinical relevance. For instance, tumor mutation burden (TMB) may be an indicator of immunotherapy. In various cancers, mutation rates accompanying neoantigen loads may be indicative of immunotherapy. Furthermore, mismatch repair-deficient tumors can be eradicated by T cells in ICB treatment. Hence, immunotherapies using vaccines or adoptive T-cell transfer targeting neoantigens are potential innovative strategies. However, significant efforts are required to identify the optimal epitopes. In this review, we summarize the recent progress in the identification of neoantigens and discussed preclinical and clinical studies based on neoantigens. We also discuss the issues remaining to be addressed before clinical applications of these new therapeutic strategies can be materialized.     

Actin-Associated Proteins and Small Molecules Targeting the Actin Cytoskeleton

Actin-associated proteins (AAPs) act on monomeric globular actin (G-actin) and polymerized filamentous actin (F-actin) to regulate their dynamics and architectures which ultimately control cell movement, shape change, division; organelle localization and trafficking. Actin-binding proteins (ABPs) are a subset of AAPs. Since actin was discovered as a myosin-activating protein (hence named actin) in 1942, the protein has also been found to be expressed in non-muscle cells, and numerous AAPs continue to be discovered. This review article lists all of the AAPs discovered so far while also allowing readers to sort the list based on the names, sizes, functions, related human diseases, and the dates of discovery. The list also contains links to the UniProt and Protein Atlas databases for accessing further, related details such as protein structures, associated proteins, subcellular localization, the expression levels in cells and tissues, mutations, and pathology. Because the actin cytoskeleton is involved in many pathological processes such as tumorigenesis, invasion, and developmental diseases, small molecules that target actin and AAPs which hold potential to treat these diseases are also listed.     

Collision response for deformable models based on hertz's contact theory

This paper presents an animation technique of collision response for deformable models defined as a spring-mass-damper system. Our approach is to calculate impulsive forces to prevent penetration of colliding objects by means of Hertz's contact theory. With this theory, contact duration and deformation in collision are obtained according to physical properties such as mass and elasticity. Animators, therefore, can represent the differences between materials such as rubber and steel in the sequence of collision animations with a few intuitive physical parameters. We also describe a deformation mapping technique which reduces the computational time of dynamic analysis and realizes the effect of global deformation.     

Wave venation in downward gas-liquid two-phase flow (part I,time-spatial behavior chart of interface and analysis of main wave-vein)

Time-series information on both the cross-sectional mean liquid holdup along a tube axis and the gas-liquid phase distribution along a tube diameter was obtained by means of supermultiple cross-sectional mean liquid holdup probes (S-CHOP) and semi-supermultiple point-electrode probes (SS-PEP) for vertical downward gas-liquid two-phase flow. Typical time-spatial behavior charts of interface and gas-liquid interfacial profiles are presented. Close inspection of these results reveals that a huge wave and a disturbance wave appear in downward two-phase flow as well as upward flow. It was clarified that the huge wave flow region covers a wide range of superficial gas velocities. Wave velocity, wave width and maximum liquid holdup of individual waves were examined by wave-vein analysis. Histograms of these flow parameters were also studied. It was found that there exist distinct differences in wave width between the huge wave and the disturbance wave. © 1997 Scripta Technica, Inc. Heat Trans Jpn Res, 25(8): 499–510, 1996     

Characteristics of interfacial profiles in upward and downward gas-liquid two-phase plug flow

Gas-liquid interfacial profiles in plug flow for both upward and downward flows were obtained using semi-supermultiple point-electrode probes, comprising 67 sensing tips arranged on a tube diameter. Typical interfacial profiles are demonstrated for both flows. Close inspection of the profiles reveals that four zones exist in a pair of gas and liquid slugs for upward plug flow and a high slip velocity region in downward plug flow. The lengths of the swelling liquid front zone and the wake zone were determined. The length of the wake zone strongly depends on the relative velocity between the liquid film around the gas slug and the liquid phase in the liquid slug. Characteristic distributions of bubbles within liquid slugs were found, i.e., three types of radial distributions of void fraction, namely saddle-shaped, trapezoidal and bullet-shaped distributions, exist for upward flow. The two types for downward flow exclude the saddle-shaped distribution. © 1997 Scripta Technica, Inc. Heat Trans Jpn Res, 25 (8): 568–579, 1996     

Regiospecific analysis by ethanolysis of oil with immobilized <Emphasis Type="Italic">Candida antarctica</Emphasis> lipase

A mixture of oil/ethanol (1∶3, w/w) was shaken at 30°C with 4% immobilized Candida antarctica lipase by weight of the reaction mixture. The reaction regiospecifically converted FA at the 1- and 3-positions to FA ethyl esters, and the lipase acted on C₁₄−C₂₄ FA to a similar degree. The content of 2-MAG reached a maximum after 4 h; the content was 28–29 mol% based on the total amount of FA in the reaction mixture at 59–69% ethanolysis. Only 2-MAG were present in the reaction mixture during the first 4 h, and 1(3)-MAG were detected after 7 h. After removal of ethanol from the 4-h reaction mixture by evaporation, 2-MAG were fractionated by silica gel column chromatography. The contents of FA in the 2-MAG obtained by ethanolysis of several oils coincided well with FA compositions at the 2-position, which was analyzed by Grignard degradation. It was shown that ethanolysis of oil with C. antarctica lipase can be applied to analysis of FA composition at the 2-position in TAG.     

Enhanced production of hydroxymethylfurfural from fructose with solid acid catalysts by simple water removal methods

This paper demonstrates two simple ways to increase 5-hydroxymethylfurfural (HMF) yield (selectivity) in fructose dehydration with various solid acid catalysts. One is a water removal from the reaction mixture by a mild evacuation at 0.97 × 10⁵ Pa; it increases HMF yield for various catalysts (heteropoly acid, zeolite, and acidic resin). The removal of water suppresses two undesired reactions: the hydrolysis of HMF to levulinic acid and the reaction of partially dehydrated intermediates to condensation products. The other method is a decrease in the particle (bead) size of the resin (Amberlyst-15). The crushed and sieved Amberlyst-15 powder in a size of 0.15–0.053 mm shows 100% HMF yield at high fructose concentration (50 wt.% in DMSO), which is to our knowledge the highest yield to date. Near-infrared spectroscopic characterization of adsorbed water suggests that the enhanced yield can be caused by an improved removal of adsorbed water in a small-size resin particle.     

Levels of Vibrio parahaemolyticus and thermostable direct hemolysin gene-positive organisms in retail seafood determined by the most probable number-polymerase chain reaction (MPN-PCR) method

The incidence and levels of Vibrio parahaemolyticus and thermostable direct hemolysin gene (tdh)-positive organisms in retail seafood were determined. The most probable number-polymerase chain reaction (MPN-PCR) method using a PCR procedure targeting the species-specific thermolabile hemolysin gene (tlh) and tdh was used to determine the levels of V. parahaemolyticus and tdh-positive organisms, respectively. In seafood for raw consumption, V. parahaemolyticus was found in four (13.3%) of 30 fish samples, 11 (55.0%) of 20 crustacean samples, and 29 (96.7%) of 30 mollusc samples. Levels of V. parahaemolyticus were below 10(4) MPN/100 g in all fish and crustacean samples tested. However, they were above 10(4) MPN/100 g in 11 (36.7%) of the 30 mollusc samples. In all seafood for raw consumption, the level of tdh-positive organisms was below the limit of detection (< 30 MPN/100 g). In seafood for cooking, V. parahaemolyticus was found in 15 (75.0%) of 20 fish samples, nine (45.0%) of 20 crustacean sample, and 20 (100%) of 20 mollusc samples. Levels of V. parahaemolyticus were above 10(4) MPN/100 g in only three (15.0%) and one (5.0%) of the 20 fish and 20 crustacean samples, respectively. However, they were above 10(4) MPN/100 g in 18 (90.0%) of the 20 mollusc samples. In seven (35.0%) of the 20 mollusc samples, tdh-positive organisms were found and their levels ranged from 3.6x10 to 1.1 x 103 MPN/100 g. From four of seven tdhpositive samples, tdh-positive V. parahaemolyticus was isolated.