Tyrosine-based poly(m-phenyleneethynylene-p-phenyleneethynylene)s. Helix folding and responsiveness to a base

The Sonogashira-Hagihara polymerization of 3′,5′-diiodo-N-α-tert-butoxycarbonyl-l-tyrosine methyl ester (1) and 3′,5′-diiodo-N-α-tert-butoxycarbonyl-O-methyl-l-tyrosine methyl ester (2) with para-diethynylbenzene (3) was carried out to obtain optically active poly(m-phenyleneethynylene-p-phenyleneethynylene)s [poly(1) and poly(2)] with M_n’s ranging from 9900 to 15,000 in 80-87% yields. Poly(1) exhibited intense CD signals in DMSO and THF, but did not in CH₂Cl₂, indicating that it took a predominantly one-handed helical conformation in the former two solvents. On the other hand, there was no evidence for poly(2) to take a helical structure in these solvents. Poly(1) turned the CD sign at 390 nm from plus to minus in DMSO/H₂O = 9/1 (v/v) by the addition of NaOH. Alkaline hydrolysis of ester moieties of poly(1) and poly(2) gave the corresponding polymers having carboxy groups [poly(1a) and poly(2a)]. Poly(1a) and poly(2a) increased the CD intensity by the addition of NaOH.     

Shock sensitivity of blasting explosive cartridges

Abstract

The undersand variable gap–initiator test was applied to most Japanese blasting explosive cartridges and found useful as the sensitivity test for the cartridges. The recent Japanese watergel and emulsion explosives were shown to be more shock–sensitive than previous ones. The blast noise in the undersand explosion was shown to decrease when the depth of sand cover the cartridge was increased. For 100g of explosive, a sand layer 20cm deep was effective in reducing the blast noise, when the depth of the sand layer was increased, there was no additional effect. All blasting explosives excluding Kuro Carlit were not ignited by a small gas flame. A cartridge of 100g Kuro Carlit was ignited undersand but did not show the phenomenon of deflagration to detonation     

Prediction of cutting forces and machining error in ball end milling of curved surfaces -II experimental verification

This paper presents the results of a series of experiments performed to examine the validity of a theoretical model for evaluation of cutting forces and machining error in ball end milling of curved surfaces. The experiments are carried out at various cutting conditions, for both contouring and ramping of convex and concave surfaces. A high precision machining center is used in the cutting tests. In contouring, the machining error is measured with an electric micrometer, while in ramping it is measured on a 3-coordinate measuring machine. The results show that in contouring, the cutting force component that influences the machining error decreases with an increase in milling position angle, while in ramping, the two force components that influence the machining error are hardly affected by the milling position angle. Moreover, in contouring, high machining accuracy is achieved in “Up cross-feed, Up cut” and “Down cross-feed, Down cut” modes, while in ramping, high machining accuracy is achieved in “Left cross-feed, Downward cut” and “Right cross-feed, Upward cut” modes. The theoretical and experimental results show reasonably good agreement.     

Durability of radiation-sterilized polymers III. Oxidation layer determined by chemiluminescence

Chemiluminescence (CL) analysis was used for determining the oxidation layer formed by the irradiation of polypropylene for medical supplies. The depth of the oxidation layer from the surface depended on dose rate and increased with decreasing dose rate. The oxidation occurred remarkably at a region near the surface area of the film where the diffusion of oxygen is more sufficient. On the contrary, there was very little oxidation in the interior portion. The oxidation layers of polypropylene samples irradiated with electron beam showed U-shaped profiles in the cross-section of film as did as a sample irradiated with γ-rays. However, the degree of oxidation by irradiation with electron beam was very small; CL intensity at the surface area was only one-third that for the γ-irradiated samples.     

Thermoplastic elastomer by radiation grafting. I. Evaluation of processability of natural rubber grafted methyl methacrylate

Processability of thermoplastic elastomer (TPE) prepared by radiation-induced grafting of methyl methacrylate (MMA) onto radiation vulcanized natural rubber latex (RVNRL) has been evaluated using a kneader and a hot roll mill at 150°C. It was found that mixing time and revolution rate (rpm) of the kneader have significantly affected the processability. The longer mixing time and the higher revolution rate result in better processability. In such processing conditions, however, the mechanical properties were found to be inferior because the molecular chain scissions occurred during the mixing. A considerable improvement of mechanical properties was obtained when the mixing was carried out without added process oils. Blends of the grafted vulcanized natural rubber latex (RVNRL-g-PMMA) and MMA grafted on unvulcanized natural rubber latex (NRL-g-PMMA) improved processability where the better processability could be achieved at a shorter mixing time and a lower revolution rate. In addition, a comparable value of mechanical properties was obtained.     

Studies on toxicity of multi-walled carbon nanotubes on Arabidopsis T87 suspension cells

The possible toxicities of agglomerates of multi-walled carbon nanotubes (MWCNTs) toward plant cells were evaluated. Arabidopsis T87 suspension cells were used as the model cells and decreases in values of cell dry weights, cell viabilities, cell chlorophyll contents, and superoxide dismutase (SOD) activities were seen for the cells cultured in media containing the agglomerates of MWCNTs, indicating the agglomerates of MWCNTs are toxic to the Arabidopsis T87 suspension cells. Moreover, the toxicities increased sharply as the diameters of the agglomerates of the MWCNTs became smaller. A concept based on the hypersensitive response is suggested to explain the possible toxic mechanism induced by the MWCNTs.     

Delamination growth mechanisms in woven glass fiber reinforced polymer composites under Mode II fatigue loading at cryogenic temperatures

The purpose of this research is to characterize the cryogenic delamination growth behavior in woven glass fiber reinforced polymer (GFRP) composite laminates subjected to Mode II fatigue loading. Mode II fatigue delamination tests were performed at room temperature, liquid nitrogen temperature (77 K) and liquid helium temperature (4 K) using the four-point bend end-notched flexure (4ENF) test method, and the delamination growth rate data for the woven GFRP laminates were obtained. The energy release rate range was determined by the finite element method. Microscopic examinations of the specimen sections and fracture surfaces were also carried out. The present results are discussed to obtain an understanding of the fatigue delamination growth mechanisms in the woven GFRP laminates under Mode II loading at cryogenic temperatures.     

Improvement of ageing properties of rubber films prepared from radiation-vulcanized natural rubber latex

Radiation-vulcanization of natural rubber latex (NRL) with n-butyl acrylate gives a higher tensile strength for films obtained after casting. The ageing properties of radiation-vulcanized natural rubber in the presence of various antioxidants have been investigated. In order to find out suitable antioxidants for radiation-vulcanized natural rubber latex (RVNRL) films, extraction of the gel fraction was carried out in xylene with 1 wt.-% antioxidant and air bubbling. Antioxidants which give less reduction in gel fraction due to oxidative degradation during extraction are effective for ageing tests of RVNRL films. It was found that tris(nonylated phenyl) phosphite (Nonflex TNP) and 2,5-di-tert-amylhydroquinone (Antage DAH), among 12 different antioxidants tested, were the most effective antioxidants for RVNRL films.     

Intentional side etching to achieve low-noise GaAs f.e.t.

A very-low-noise 0.5 ?m-gate GaAs f.e.t. is realised by using intentional side etching of an Au/Ti double layer as the Schottky-gate metal. At 12 GHz, the minimum noise figure is 2.1 dB, with 7.6 dB associated gain at a bias of VD = 4 V, ID= 10 mA. Maximum stable gain is 14 dB at VD = 4 V, ID = 30 mA.