Implementation of a decision support system using an interactive large-scale high-resolution display

In this research, we propose and evaluate a decision support system using an interactive large-scale high-resolution display. This decision support system supports the summarization and decision-making of a large amount of disaster information during the occurrence of a large-scale natural disaster. Municipal employees at the disaster control headquarters can display disaster information on the large-scale display with a touch or flick on a laptop or tablet. To evaluate the operability, readability, functionality, and necessity of the decision support system, we surveyed 23 municipal employees in the disaster prevention division using a questionnaire. The system received a great evaluation in all the evaluation items.     

Observation of the epicerebral microcirculation studied by fluorescein angiography (author's transl)

Fluorescein angiography was carried out by modification of method as described by Feindel et al. The hemisphere was widely exposed to allow visualization of surface blood vessels. In the experimental room, the dye was injected rapidly either through a fine polyethylen catheter placed in the lingual artery or thorough the cannula in the femoral vein. For "lingual" angiography 1.6 ml of 1% sodium fluorescein were used, while for "femoral" angiography, 4 ml of 10% solution were injected. In the operating room 4 ml of 1% sodium fluorescein are rapidly injected into an internal carotid catheter. Serial photographs of the passage of the dye through the surface vessels of the hemisphere were taken with a motor-drive Nikon camera at interval of 0.4 seconds, or longer when indicated, starting at the time of the injection. The shutter was synchronized with the discharge of a rapid re-charging stroboscopic light. A wratten gelatin filter 47A (Kodak) was used over the light and a Nikon filter Y52 over the camera lens for Kodak high speed ektachrome film to obtain color photographs. The timing of the interval between photographs was measured to within in 0.4 seconds by recording from a ink written oscillography synchronized with the shutter. Thus the velocity of flow in individual vessels could be calculated from the serial photographs.     

Current-induced domain nucleation in ferromagnet

A key mechanism of the current-induced magnetization dynamics is the spin torque from a spin polarized current (spin current), which couples to spatial gradient of magnetization. Recently, it was pointed out that a large spin current applied to a uniform ferromagnet leads to a spin-wave instability. In this paper, we show that such instability is absent in a state containing a domain wall. This may indicate that nucleation of magnetic domains occurs above a certain critical spin current. This scenario is supported by an explicit energy comparison between the uniformly magnetized state and the domain-wall state under spin current.     

Microstructure evolution during thermomechanical processing in 3Mn-0.1C medium-Mn steel

ABSTRACT

Medium-Mn steels are energetically investigated as a candidate of the third generation advanced high strength steels (AHSSs). However, their phase transformation and microstructaure evolution during various heat treatments and thermomechanical processing are still unclear. The present study first confirmed the kinetics of static phase transformation behaviour in a 3Mn-0.1C medium-Mn steel. Hot compression tests were also carried out to investigate the influence of high-temperature deformation of austenite on subsequent microstructure evolution. It was found that static ferrite transformation was quite slow in this steel, but ferrite transformation was greatly accelerated by the hot deformation in austenite and ferrite two-phase regions. Characteristic dual-phase microstructures composed of martensite and fine-grained ferrite were obtained, which exhibited superior mechanical properties.

This paper is part of a Thematic Issue on Medium Manganese Steels.     

Psychological Stress Exacerbates Inflammation of the Ileum via the Corticotropin-Releasing Hormone-Mast Cell Axis in a Mouse Model of Eosinophilic Enteritis

The effects of psychological stress on eosinophilic gastrointestinal disorders have not been elucidated. This study investigated the effects of psychological stress in a mouse model of eosinophilic enteritis (EoN). BALB/c mice were treated with ovalbumin (OVA) to create an EoN model and subjected to either water avoidance stress (WAS) or sham stress (SS). Microscopic inflammation, eosinophil and mast cell counts, mRNA expression, and protein levels of type 2 helper T cell (Th2) cytokines in the ileum were compared between groups. We evaluated ex vivo intestinal permeability using an Ussing chamber. A corticotropin-releasing hormone type 1 receptor (CRH-R1) antagonist was administered before WAS, and its effects were analyzed. WAS significantly increased diarrhea occurrence and, eosinophil and mast cell counts, and decreased the villus/crypt ratio compared to those in the SS group. The mRNA expression of CRH, interleukin IL-4, IL-5, IL-13, eotaxin-1, and mast cell tryptase β2 significantly increased, and the protein levels of IL-5, IL-13, and OVA-specific immunoglobulin E (IgE) also significantly increased in the WAS group. Moreover, WAS significantly increased the intestinal permeability. The CRH-R1 antagonist significantly inhibited all changes induced by WAS. Psychological stress exacerbated ileal inflammation via the CRH-mast cell axis in an EoN mouse model.     

Fabrication and flow-sensor application of flexible thermal MEMS device based on Cu on polyimide substrate

A Cu on polyimide (COP) substrate was proposed as a MEMS material, and the fabrication process for a flexible thermal MEMS sensor was developed. The COP substrate application to MEMS devices has the advantage that typical MEMS structures fabricated in a SOI wafer in the past—such as a diaphragm, a beam, a heater formed on a diaphragm—can also be easily produced in the COP substrate in the flexible fashion. These structures can be used as the sensing element in various physical sensors, such as flow, acceleration, and shear stress sensors. A flexible thermal MEMS sensor was produced by using a lift-off process and sacrificial etching of a copper layer on the COP substrate. A metal film working as a flow sensing element was formed on a thin polyimide membrane produced by the sacrificial etching. The fabricated flexible thermal MEMS sensor was used as a flow sensor, and its characteristics were evaluated. The obtained sensor output versus the flow rate curve closely matched the approximate curve derived using King’s law. The rising and falling response times obtained were 0.50 and 0.67 s, respectively.

     

Computational cavitation flows at inception and light stages on an axial-flow pump blade and in a cage-guided control valve

Cavitation flows induced around an axial-flow pump blade and inside a high pressure cage-type valve are simu-lated by a two-dimensional unsteady Navier-Stokes analysis with the simplest treatment of bubble dynamics.Thefluid is assumed as a continuum of homogeneous dispersed mixture of water and vapor nuclei.The analysis isaimed to capture transient stages with high amplitude pressure change during the birth and collapse of the bubbleespecially at the stage of cavitation inception.By the pump blade analysis,in which the field pressure is moderate,cavitation number of the inception and locations of developed cavitation are found to agree with experimental re-suits in a wide flow range between high incidence and negative incidence.In the valve flow analysis,in which thewater pressure of 5MPa is reduced to 2MPa,pressure change responding to the bubble collapse between the vaporpressure lower than 1 KPa and the extreme pressure of higher than 10~4 KPa is captured through a stable computa-tion.Location of the inception bubble and pressure force to the valve plug is found agree well with the respectiveexperimental features.     

Locomotion Control of MEMS Microrobot Using Pulse‐Type Hardware Neural Networks

This paper presents the locomotion control of a microelectromechanical system (MEMS) microrobot. The MEMS microrobot demonstrates locomotion control by pulse‐type hardware neural networks (P‐HNN). P‐HNN generate oscillatory patterns of electrical activity like those of living organisms. The basic component of P‐HNN is a pulse‐type hardware neuron model (P‐HNM). The P‐HNM has the same basic features as biological neurons, such as the threshold, the refractory period, and spatiotemporal summation characteristics, and allows the generation of continuous action potentials. P‐HNN has been constructed with MOSFETs and can be integrated by CMOS technology. Like living organisms, P‐HNN has realized robot control without using software programs or A/D converters. The size of the microrobot fabricated by MEMS technology was 4 × 4 × 3.5 mm. The frame of the robot was made of a silicon wafer, equipped with rotary actuators, link mechanisms, and six legs. The MEMS microrobot emulated the locomotion method and the neural networks of an insect by rotary actuators, link mechanisms, and the P‐HNN. We show that the P‐HNN can control the forward and backward locomotion of the fabricated MEMS microrobot, and that it is possible to switch its direction by inputting an external trigger pulse. The locomotion speed was 19.5 mm/min and the step size was 1.3 mm. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 43–50, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22473     

Phosphorus flame retardants in indoor dust and their relation to asthma and allergies of inhabitants

Organophosphate esters are used as additives in flame retardants and plasticizers, and they are ubiquitous in the indoor environment. Phosphorus flame retardants (PFRs) are present in residential dust, but few epidemiological studies have assessed their impact on human health. We measured the levels of 11 PFRs in indoor floor dust and multi‐surface dust in 182 single‐family dwellings in Japan. We evaluated their correlations with asthma and allergies of the inhabitants. Tris(2‐butoxyethyl) phosphate was detected in all samples (median value: 580 μg/g in floor dust, 111 μg/g in multi‐surface dust). Tris(2‐chloro‐iso‐propyl) phosphate (TCIPP) was detected at 8.69 μg/g in floor dust and 25.8 μg/g in multi‐surface dust. After adjustment for potential confounders, significant associations were found between the prevalence of atopic dermatitis and the presence of TCIPP and tris(1,3‐dichloro‐2‐propyl) phosphate in floor dust [per log₁₀‐unit, odds ratio (OR): 2.43 and 1.84, respectively]. Tributyl phosphate was significantly associated with the prevalence of asthma (OR: 2.85 in floor dust, 5.34 in multi‐surface dust) and allergic rhinitis (OR: 2.55 in multi‐surface dust). PFR levels in Japan were high compared with values reported previously for Europe, Asia‐Pacific, and the USA. Higher levels of PFRs in house dust were related to the inhabitants' health status.     

Alignment control of liquid crystals in a 1.0‐μm‐pitch spatial light modulator by lattice‐shaped dielectric wall structure

We achieved uniform liquid crystal (LC) alignment in lattice‐shaped dielectric walls 1 μm in pitch; this is a prerequisite when driving the individual pixels of spatial light modulators, facilitating the development of practical electronic holographic displays with a wide field of view. In lattice‐shaped dielectric walls, LC alignment becomes unstable, particularly on the bottom and the walls; the LC directors tend to align parallel to the walls. To overcome this problem, we created lattice‐shaped walls featuring partition plates that allow uniform LC alignment. When the plates confine LCs to small regions exhibiting spatial anisotropy, the LC elastic effect and wall anchoring forces align the LC directors parallel to the long anisotropic axis. We found that pixels 0.5 μm × 1.0 μm in pitch formed if the partition plates were sufficiently thick to allow shielding of electric field leakage.