风力发电机塔架的涂装

按照设计要求制备用于风力发电机塔架的防腐蚀配套涂料,塔架的筒体内部涂层由环氧树脂聚酰胺富锌底漆和环氧树脂聚酰胺云母氧化铁中涂漆组成,筒体外部涂层由环氧树脂聚酰胺富锌底漆、环氧树脂聚酰胺云母氧化铁中涂漆和丙烯酸脂肪族聚氨酯面漆组成。该涂料体系的防腐涂层可常温固化,厚度达到275μm,防腐蚀寿命可达20年之久,其防腐效果、耐冲击性和耐候性良好。文章同时讨论了涂装工艺过程中易出现的问题及解决办法。     

Ca_(0.6)Mg_(0.4)Zr_4(PO_4)_6低膨胀陶瓷的制备与烧结

采用分步沉淀法合成了Ca_(0.6)Mg_(o.4)Zr_4(PO_4)_6单相粉体。CMZP陶瓷的烧结主要取决于温度和烧结助剂,最大密度达到理论值的98％,借助SEM观察了表面及断口形貌,EDX作元素的半定量分析在1300℃试样表面发生了分解。     

Prediction of particle motion in a two-dimensional bubbling fluidized bed using discrete hard-sphere model

The solids motion in a gas-solid fluidized bed was investigated using a discrete hard-sphere model. Detailed collision between particles and a nearest list method are presented. The turbulent viscosity of gas phase was predicted by subgrid scale (SGS) model. The interaction between gas and particles phases was governed by Newton's third law. The distributions of concentration, velocity and granular temperature of particles are obtained. The radial distribution function is calculated from the simulated spatio-temporal particle distribution. The normal and shear stresses of particles are predicted from the simulated instantaneous particle velocity. The pressure and viscosity of particles are obtained from both the kinetic theory of granular flow and the calculated stresses of particles. For elastic particles the individual lateral and vertical particle velocity distribution functions are isotropic and Maxwellian. The observed anisotropy becomes more pronounced with increasing degree of inelasticity of the particles.     

Study on structure-property relationship of polyimide blends

Summary Three pairs of polyimide/polyimide blends (50/50 wt%) with different molecular structures were prepared by two ways, i.e. mixing of the polyamic acid precursors with subsequent imidization, and direct solution mixing of the polyimides. The blends were studied with DMA technique. The results obtained show that all the blends prepared with these two different ways are miscible, as there existed only one glass transition temperature (Tg) for all the blends. It is suggested that the miscibility of these polyimide/polyimide blends is a result of the strong inter-molecular charge-transfer interaction between the chains of their components.     

聚砜酰胺的分子量对其超滤膜性能的影响——Ⅲ.热性能

对不同分子量的PSA 材料和由其制成的超滤膜的TGA、DSC 及FTIR 研究表明,PSA 会以氢键的形式吸附水份,被吸附的水份主要以单分子形式存在,双聚或多聚的也有,但较少;并且在温度升到40℃左右将全部游离出来,在120℃左右则全部气化离开PSA。PSA 材料在400℃以上才开始分解,其耐热性能随分子量的增大而降低。凝胶浴不同对PSA 膜的晶态影响不大。     

Analysis over factors of innovation in China’s fast economic growth since its beginning of reform and opening up

The technological progress makes great contribution to the rapid economic growth of China during its past three decades of reform and opening up. An empirical analysis conducted over China’s total factor productivity certifies this conclusion but it also reveals that China’s TFP growth rate is not very high. We further explore the various stages of change of China’s total factor productivity and the causes of these changes and finally take an analytical calculation over the present flaws of China’s innovation system and offer some advices.     

超声辐照制备SrFeO3降解苯酚光催化性能研究

采用超声辐照柠檬酸络合法制备了复合氧化物SrFeO3，以苯酚为光催化探针分子，以450W高压汞灯为光源（主波长〉410nm），研究了SrFeO3光催化性能、研究表明，经过超声辐照制备的SrFeO3光催化活性提高一倍以上。XRD、TEM、DRS表征结果表明，超声辐照制备的SrFeO3粒径均匀、分散性好、粒径较小，光吸收红移显著。探讨了超声提高催化性能的机理。     

Study on pH‐sensitive and thermosensitive polymer networks containing polyacetal segments

A series of pH‐sensitive and thermosensitive polymer networks were first obtained by copolymerization of telechelic poly(1,3‐dioxolane) (PDXL) with acrylic acid (AA), acrylamide (AM), and N‐isopropylacrylamide (NIPAM), respectively. The copolymerization of PDXL diacrylate (PDXLDA) with AA, AM, or NIPAM is expected to lead to polymer networks in which homopolymeric segments of the monomer are connected by polyacetal segments. As a combination of these two parts, these polymer networks can have some interesting physical properties. For example, the copolymer networks of poly(AA‐b‐DXL) showed pH sensitivity, and both the copolymer networks of poly(AM‐b‐DXL) and poly(NIPAM‐b‐DXL) showed temperature sensitivity. Moreover, because of the low ceiling temperature of polyDXL, the networks containing polyacetal segments (PDXL) can degrade by treatment with a trace of appropriate cationic initiator. The polymer networks prepared were characterized by Fourier transform infrared, differential scanning calorimetry, and swelling data. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3002–3006, 2002; DOI 10.1002/app.2329     

Synthesis of exfoliated PP/LDH nanocomposites via melt‐intercalation: Structure,thermal properties,and photo‐oxidative behavior in comparison with PP/MMT nanocomposites

Exfoliated polypropylene (PP)/layered double hydroxide (LDH) nanocomposites have been successfully synthesized via melt‐intercalation. Their structure, thermal properties, and photo‐oxidative behavior have been characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), dynamic mechanical thermal analysis (DMA), X‐ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR) spectrum. TGA and DMA data show that the PP/LDH nanocomposites have enhanced thermal stability compared with virgin PP and corresponding PP/montmorillonites (MMT) nanocomposites, especially in high temperature range during the thermal decomposition of the samples. XPS and FTIR results give positive evidence that the photo‐oxidation mechanism of PP in the PP/LDH materials is not modified compared with that of virgin PP. However, photo‐oxidation rate of PP/LDH materials is much lower than that of PP and PP/MMT samples, indicating that the PP/LDH nanocomposites have better UV‐stability. POLYM. ENG. SCI. 46:1153–1159, 2006. © 2006 Society of Plastics Engineers     

Data-based adaptive online prediction model for plant-wide production indices

A data-based adaptive online prediction model is proposed for plant-wide production indices based on support vector regression, a general method which we customized specifically to model very large data sets that are generated dynamically and periodically. The proposed model can update its parameters online according to the statistical properties of the training samples. Further, in order to improve the prediction precision, each sample is weighted with a dynamic penalty factor that considers the effect of each sample on the prediction model accuracy. Moreover, a customized procedure is introduced to handle large training sets. After having been convincingly evaluated on benchmark data, effectiveness and performance of our approach for plant-wide production indices is demonstrated using industrial data from an operating ore dressing plant over a range of scale in training data set size. The higher accuracy and shorter computation times than existing methods suggest that it may prove advantageous in actual application to dynamic production processes.