Wavelength selection for low-saturation pulse oximetry

Conventional pulse oximeters are accurate at high oxygen saturation under a variety of physiological conditions but show worsening accuracy at lower saturation (below 70%). Numerical modeling suggests that sensors fabricated with 735 and 890 nm emitters should read more accurately at low saturation under a variety of conditions than sensors made with conventionally used 660 and 900 nm band emitters. Recent animal testing confirms this expectation. It is postulated that the most repeatable and stable accuracy of the pulse oximeter occurs when the fractional change in photon path lengths due to perturbations in the tissue (relative to the conditions present during system calibration) is equivalent at the two wavelengths. Additionally, the penetration depth (and/or breadth) of the probing light needs to be well matched at the two wavelengths in order to minimize the effects of tissue heterogeneity. At high saturation these conditions are optimally met with 660 and 900 nm band emitters, while at low saturation 735 and 890 nm provide better performance     

Thick-layer glycerin-containing bichromated gelatin for recording volume holograms

A thick-layer light-sensitive material consisting of glycerin-containing bichromated gelatin has been prepared and used to record real-time volume holograms with 0.44 μm helium-cadmium laser radiation. The thickness of the layers is 400–600 μm. The holographic sensitivity of the material is 1 J/cm². The highest diffraction efficiency of holograms recorded using a symmetric system with parallel beams is 32%. Pis’ma Zh. Tekh. Fiz. 23, 62–65 (April 12, 1997)     

Propagation characteristics of a heaviside absorbing layer for TLM

The perfectly matched layer for use with the finite-difference time-domain method is adapted to our transmission-line matrix simulation as what we call a heaviside absorbing layer (HAL). It is shown that the reflection coefficient for the wave incident on a HAL is less than that of the wave incident on a matched-load termination at all angles of incidence. Furthermore, the dispersion relation of a transmission-line matrix mesh of a symmetrical condensed node with both electric and magnetic loss stubs is derived. It provides guidance on how to choose the losses of HAL and other simulation parameters properly     

Analysis of switched diversity TCM-MPSK systems on Nakagami fadingchannels

Space diversity reception and forward-error correction coding are powerful techniques to combat multipath fading encountered in mobile radio communications. In this paper, we analyze the performance of a discrete-time switched diversity system using trellis-coded modulation multiple phase-shift keying (TCM-MPSK) on slow, nonselective correlated Nakagami (1960) fading channels. Analytical upper bounds using the transfer function bounding technique are obtained and illustrated by several numerical examples. A simple integral expression for calculating the exact pairwise error probability is presented. The use of optimum adaptive and fixed switching thresholds is considered. Monte Carlo simulation results, which are more indicative of the exact system performance, are also given     

Use of a two-wire microwave line at the boundary of the investigated zone to measure the electron density in a low-temperature plasma

A new method based on a two-wire line has been developed for noncontact diagnostics of a low-temperature plasma and its fluxes in channels with complex profiles. This method provides good spatial and time resolution. Pis’ma Zh. Tekh. Fiz. 23, 1–7 (July 26, 1997)     

Estimating local mean signal strength of indoor multipathpropagation

We explore techniques for the measurement of local mean signal strength at 900 MHz and 2 GHz. In particular, we characterize the impact of transmitter and receiver antenna rotation on the estimated local mean. Then, we explore the collection of high resolution data while moving along a linear trajectory and using linear averaging techniques to estimate the local mean. With this information, the best measurement techniques can be chosen depending on the required speed versus accuracy tradeoff. Finally, we use a ray tracing propagation model to evaluate different methods of calculating the local mean signal strength for indoor environments     

STRESS INTENSITY FACTORS AND WEIGHT FUNCTIONS FOR SEMI-ELLIPTICAL SURFACE CRACKS IN FINITE-THICKNESS PLATES UNDER TWO-DIMENSIONAL STRESS DISTRIBUTION

Abstract— A Fourier series approach is proposed to calculate stress intensity factors using weight functions for semi-elliptical surface cracks in flat plates subjected to two-dimensional stress distributions. The weight functions were derived from reference stress intensity factors obtained by three-dimensional finite element analyses. The close form weight functions derived are suitable for the calculation of stress intensity factors for semi-elliptical surface cracks in flat plates under two-dimensional stress distributions with the crack aspect ratio in the range of 0.1 ≤ a/c ≤ 1 and relative depth in the range of 0 ≤ a/t ≤ 0.8. Solutions were verified using several two-dimensional non-linear stress distributions; the maximum difference being 6%.     

Triple check for antigen specificity of B cells during germinal centre reactions

Somatic hypermutation of the immunoglobulin variable genes during germinal reactions might permit the expansion of B-cell clones with unwanted (e.g. autoreactive) specificity. Here, Ernst Lindhout and colleagues propose three antigen-specific checkpoints that ensure the appropriate antigen specificity of activated B cells is maintained by regulating the activation, selection and further differentiation of B cells.