The direct measurement of ppm levels of uranium in soils using high-resolution Ge(Li) gamma-ray spectroscopy

The direct determination of ²³⁸U in various soil samples was done by measuring the 63.3-keV transition from the decay of the first daughter ²³⁴Th. Potential errors resulting from the chemical non-equilibrium of ²³⁸U with its daughters are thus avoided. The method sensitivity is 1 ppm compared to the 35 ppm obtainable by employing the 1001-keV gamma ray. A Ge(Li) gamma-ray spectrometer is the only analytical tool required. Examples are offered that demonstrate the usefulness of the technique for routine, inexpensive environmental monitoring of uranium. The technique also has the capability of providing information on the ²³⁸U/²³⁵U isotopic ratio.     

Virtual reality systems and research on the perception, simulation and presentation of environmental change

The ability of evolving data visualization techniques (e.g. video image-capture technology) to portray realistically both the sensuous and connotative properties of the molar environment and change within the environment has produces an abundance of environmental perception studies using various visualization technologies. Future growth in the application of these technologies to environmental change perception research requires consideration of three sets of issues: (1) the nature of the perceptual experiencing of environment; (2) simulation of thise experience; and (3) presentation of environmental displays to people engaged in the studies.     

Probabilistic calculation for the bed under an individual foundation in accordance with the second group of limiting states

Conclusions 1. The method proposed for the probabilistic design of beds makes it possible to obtain a well-founded design solution corresponding to a given reliability level, which, in many cases, is more economic than the solution recommended in the Construction Rules and Regulations. 2. The design solution adopted as a result of the calculation set forth in the Construction Rules and Regulations possesses a reliability level, which, for some unknown reason, is on the high side. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 2, pp. 18–20, March–April 1991.     

Elastoplastic finite-element analysis of the bearing capacity of beds of reconstructed entities

A method is presented for determination of the coefficients that take into account the increase in angle of internal friction and specific cohesion of silty-clayey soils in predicting variation in the bearing capacity of beds after the long-term effect of the consolidating service-induced loads. __________ Translated From Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 2, Pp. 18–21, March–April, 2007.     

Dissolution of copper, tin, and iron from sintered tungsten-bronze spheres in a simulated avian gizzard, and an assessment of their potential toxicity to birds

The rates of dissolution of copper, tin, and iron from sintered tungsten-bronze spheres (51.1%W, 44.4%Cu, 3.9%Sn, 0.6%Fe, by mass) were measured in an in vitro simulated avian gizzard at pH 2.0, and 42C. Most of the spheres had disintegrated completely to a fine powder by day 14. Dissolution of copper, tin, and iron from the spheres was linear over time; all r>0.974; all P<0.001. The mean rate of release of copper, tin, and iron was 30.4 mg, 2.74 mg, and 0.38 mg per g tungsten-bronze per day, respectively. These rates of metal release were compared to those in published studies to determine whether the simultaneous ingestion of eight spheres of 3.48 mm diameter would pose a toxic risk to birds. The potential absorption rates of iron and tin (0.54 mg Fe/day, and 3.89 mg Sn/day) from eight tungsten-bronze spheres of total mass 1.42 g would not prove toxic, based on empirical studies of tin and iron ingestion in waterfowl. The release of 43.17 mg copper/day from eight tungsten-bronze spheres, while exceeding the daily copper requirements of domesticated birds, is far below the levels of copper known to cause copper toxicosis in birds. We conclude that sintered tungsten-bronze material made into gunshot, fishing weights, or wheel balance weights, would not pose a toxic risk to wild birds when ingested.     

Radionuclide contamination of foods imported into Iraq following the Chernobyl nuclear reactor accident

Since early 1986, a monitoring program for radionuclides in imported foods has been carried out by the Iraqi Atomic Energy Commission. After the Chernobyl nuclear reactor accident in the Soviet Union, the program was expanded; our laboratory was officially designated by the Iraqi Government to measure radionuclide activity concentrations in foodstuff imported from countries known to be severely contaminated by Chernobyl radioactive fallout. Gamma-spectrometric analysis was used. Food items such as powdered milk, lamb meat, poultry, cereals and grains imported into Iraq before the Chernobyl accident did not contain any detectable fission products. However, all lamb meat, 81% of the lentil, 44% of the powdered milk and chick-pea, and 17% of the roast beef samples were contaminated with 137Cs or 134Cs and 137Cs. The highest 137Cs contamination levels found were 82, 147, 420, 6 and 4 Bq kg-1, respectively. Contamination by 134Cs was approximately 50% of the values given above.     

The acute effect of bunker C oil and an oil dispersant on: 1 Serum glucose, serum sodium and gill morphology in both freshwater and seawater acclimated rainbow trout (Salmo gairdneri)

Bunker C oil and an oil dispersant were tested for physiological stress on both freshwater and saltwater acclimated rainbow trout. Both compounds tended to reduce serum glucose levels with Bunker C causing the more significant decrease (P < 0.08), indicating a possible dysfunction of the kidney. The freshwater treatment group showed a significant decrease in sodium levels (P < 0.01) when treated with a dispersant, while under similar conditions, saltwater acclimated fish show a very marked increase in serum sodium concentrations (P < 0.025). Those fluctuations in sodium levels are resultant from direct interference with the energy activated sodium transport systems of the gills. Microphotographs of gill filaments and lamellae show severe damage caused by the dispersant and dispersant/oil mixture with less impairment resultant from Bunker C exposure.     

Congratulations to Valerii Viktorovich Mikheev

Anniversaries and Memorable Dates

Congratulations to Valerii Viktorovich Mikheev Candidate of Technical Sciences, honorable builder of the Russian Federation, and recipient of the prize awarded by the Council of Ministers of the USSR     

Does oyster size matter for modelling trace metal bioaccumulation?

The aim of this study was assessing whether trace metal bioaccumulation models for oysters need to account for the effect of size-structured demography. To achieve this, we used a Bayesian generalised additive mixed modelling (BGAMM) approach. This nonparametric regression approach allowed us to estimate potentially nonlinear size effects of the oysters as well as random and structured spatial effects. Native oysters were collected from ten locations around the shoreline of Moreton Bay, a subtropical estuary in southeast Queensland, Australia. The soft-tissue of these sampled oysters were weighed (dry weight basis) and then analysed for Al, Cu, Fe, Mg, Mn and Zn. Of the six trace metals analysed, only Mg was found to have a significant (negative) effect of soft-tissue mass. The correlated spatial effects for Cu, Mn and Zn indicated that the source of these trace metals in the oysters was from anthropogenic inputs while the correlated spatial effects for Al and Mg indicated natural inputs. The correlated spatial effect for Fe was characterised by 'hotspot' concentrations in regions of Moreton Bay where algal blooms have previously occurred and consequently oysters might be useful as an indicator of algal blooms in the Bay. Overall, the absence of an observed size effect for five of the six trace metals indicates that bioaccumulation models do not necessarily need to account for size-structured demography therefore enabling simpler models to be used.